Push Pull - Heavy Haul - Cat 994 - Mack Super Liner
ฝัง
- เผยแพร่เมื่อ 26 พ.ค. 2008
- HHA Gang Again shiftn a Cat 994 Loader almost at site - The Big Machine was moved from Ritche Bros to Darlington Park Quarry. The hills made it plenty of fun on route..... Check it out!!
- ยานยนต์และพาหนะ
Top vid!! goes to show how much teamwork goes into a push-pull operation!
500hp mack v8...i love that sound. 5 Stars!!
Hello!!
I Love this Video is Awesome!!
Meny Greetings from Germany !!
Sebastian
The aussies have some really nice heavy haul rigs!!! Great video.
Love the mack super liner at the back !
another outstanding video... thanks a lot for posting 'em!!
That's still gotta weigh 200,000 to 300,000 pounds! I've run a 992 at 200,000 lbs but the 94 is twice as big! Great video!
Nice Upload, Nice Rigs And Dam That's A Massive FE Loader ;)
hats off to you boys.good job.
Mack and Super...2 words that definitely don't belong next to each other
that push truck got a really nice to sound too it.
Beautiful trucks mate
I have got the poster of "High Roller" that came in the Truckin' Life magazine
old school....respect!
Oh my god, AWESOME!
amazing that these tractors don't overheat doing all that work at low speeds
Top stuff!!
Awesome!!!!!!!!!!!!!!!!
Super Video Thanks
nice sounding v8 on the pusher truck
While I like Mack's, especially the Superliners, I was quite attached to the Kenworth 953's with V16 GM's we had for rig moves in the Middle East, they sounded awesome under power
that is one nice western star
cool video!
Sweet!
If that big liner was,nt on the back the thing on the front would,ve been dragged backwards down the hill.💪💪💪💪👌👍
none other than mr.kelly himself!
Thank you
wish it kept on going, theose jakes sound sweet
Nice Video
how much tons does this load have?
amazing sound of the truck
i Work for CAT. The 994F(the latest model) oparating weighs 430,858 lbs with 1463hp. Not sure what the weight is on the hauler cause it does not have the cab, tires, bucket, all the step sides and hand rails or even the smoke stack or air intakes installed. It may not have even had the belly pans in the rear on that are used as a counter weigh. on some models wheel loads. they vary from model to model. never the less it heavy as hell.
I didn't hear his answer back, was that at absolute wide open? Thats a very impressive haul, and some beautiful trucks, you don't see that too often here in the U.S.
That superliner has a great sound to it
I have a rd 800 mack that use to be a 10 wheeler coal truck and one of my mechanic s said he could put a 992d rock loader engine in it i would to have that 994 behine it to c how fast we could pull it up that hill and he done great to pull it up hill
that's a cat 994 loader, it's the biggest one they make!!! thats some heavy shit!!!
How much HP these mack's produce? How they handle little "tweaks" ? Over heat then in these hard works? Do they build these anymore, some other video someone said that V8's are gone in trucks at murica soon?
nice cruzer
brilliant.
due to the excessive weight of the loader on board, the lead truck does not have enough gearing to pull that load up a hill so a second truck is used to halve the load on the lead trucks driveline
It took two trucks to pull that load. The bucket loader was stripped almost to the frame no tires or bucket and it took two trucks to pull that.
WOW,thats awesome,I have BIG respect for truckies australia wide..Mate those rigs are workin hard?Or do they just look and sound that way?
*lol* It sounds to me as it was a job for one truck! The pusher was doing all the work! Check and listen! ;-)
its funny how some of those pipes and machines dont look real heavy but you can here both trucks really working, can i ask why you got a star and not another newish mack super liner titan or trident
Ca'nt quite see in the video,is the push bar jointed at both ends so that the rear truck has to steer to follow the load OR is the bar an A frame which steers the truck and the second driver just operates the pedals?
if those tractor units were to fail that little pick-up truck would be toast...
Ah,, didn't see it that way, i used to work for a steel mill, and the stuff they did to move equipment was meant to be safe, but when you figure in all the other things that had to be done to transport equipment, it was actually safer to just hop in and drive the blasted thing
My uncle lost his foot to a tire being dropped on it, they had thirty miles to transport the truck all the roads were wide enough all they had to do was drive it no hills no crossings
this was in flood plains so no bridges
fucken awesome!!!!!!!
thats some hectic shit! DIESEL POWER!!!!!!
THE LEGEND MR KELLY!
I know nobody will see this reply, but I was always wondering whose account this was and now I know hearing Boss Jon in the background. Good luck in your future endeavors, Jon!
the cat 994 weighs 423,000 lb, but this one has no tires,bucket etc. but it´s probably heavy enough.
i found one for ya search "sucking up pits on tandem" here on you tube that mud tank weighs at the least 42 tons the rears on this truck are 70k or 80k the bed is probly 40ft and im positive this truck is in the USA and in the oil field ever day ..just sayin
@MrSoccernugget cheers dude :)
@TheLuke2reeve I know i'm just saying if for some silly reason it did then it'd have no chance when there's something that big on the trailer
thats HHA trucks :D
fuckong power !!! Very Nice
no bad
Nice vid! Do you have any videos of gangsters paradise? best truck in Aus...
@Jamiewaldie1992 yeah true
They talk to each other
2 questions 4 u guys
1 what's the weight of the 994?
2 what's under the hood of the mack?
1 gear an floor it :))
thanks,by the way,this machine seems to be too havy damn
@1969Charger4401969 Oversize trucks MUST have their headlights on.
It part of o/size permit conditions
and clean ash trays
is that jon kelly behind cam ???
What engine in that Superliner??? The sound is awsome!!! :-D...
E-9.
@Pawel8510
but built in australia. alot more grunt then the american classes.
@Jamiewaldie1992 but mack does not fail
i want !
any more vids like this one from hha
What's that thing on the platform?
if i'm wrong, those are normal sized for america
Vids like this are cool but I noticed alot more hoarse power was added by turning the head lights on. Never understood the concept of every one running during day light hours with lights on like its dark or something
westerstar and mack
How heavy is it?
Both
couldn't do this in the US
Yeah, except for a pair of soviet tanks and such stuff.
ten z tyłu go pcho?
bout 300 tons
1 Low :)
i bet going down hill is fun
imagine stopping downhill
on a flat road when you have a push pull load; does the push truck stay in gear or what?
on a up grade when does the push truck know to apply prower to his truck to start helping on the pull?
Thank you.
first guess
the Cat 994 Superleggera wouldn't need a pusher
Damn....what gear was you in....i know you were ready to get rid of that heavy piece of shit!....give that clutch leg a rest
In the other video it was stated that it was being moved only 15 KM, not trying to sound smart or anything, mostly curious though, why not simply escort the vehicle while it moves under it's own power seems like a lot less time would be invested for such a short move. Taking off the wheels etc had to be an all day job right?
low gear? derp
@1969Charger4401969 Your NOT in Australia, have a look at AUSTRALIAN regulations
@shaned8845 Not according to what I can find in my home state Oversize regulations.
fuck.Takie coś to tylko w ameryce!
the driver must tired after arrive destination
ok?
I went off on a rant and didn't notice, I'm tired of all the people believing stereotypes
@markrskinner LOL almost as ridiculous as running around with lights on during the day aint it?
that aint no mack its a western star look at the next video
@1969Charger4401969 hoarse?
@1969Charger4401969 regulations
any verification on what a owner operator in heavy haul like this makes a yr ive heard upwards of 325K. can anyone verify that for me ? :)
Its a 994 and knocked down like that it probably goes 130 ton you muppet
i don`nt know how much trukin you did here in the USA but search Diamond trucking we do go big and those trucks are not all that special both trucks power combined maby 1900 hp to the groung and being nice and what that KW has 44k rears..... medium duty oil field winch trucks have 52k rears we also have KW`s that we call tandems (dual front axels) that winch up 50 tons and move it on locations ......Check out our shit before you talk your shit ........just sayin
Nice Video