Hi, This is not simple. You need the mirror (glass) and also the LIN controllers with autodim feature. They are the black roundels behind the plastic caps where the wires comes from. The costs around 100€ each at your dealer (plus glasses...) You don't need extra wire from inner and side mirrors, they are communicating through a data bus (CAN & LIN) so it is almost plug&play. You also will need to recode some modules for get them working.
Hi, Unless your car has memory seats, you will have to rewire the mirrors to the FRM module. This is because you need to add LIN bus between them. I have done it successfully in many cars.
I already have auto dimming inner rearview mirror and I'm thinking about upgrading my side mirrors into auto dimming ones too. It's enough just to replace the side mirrors (only the mirrors, without whole mirror housing) with ones with auto dimming function or I need to do something more? Is wire harness between inner and side mirrors for activating auto dimming already there? Thank you!
e93 like yours. I guess , I need to change some in CAS, because when i instal the mirrors I unplug one of them with ignition ON and some parameters change (like reset) - cold turn signal bulb check, windows didnt move up and down a bit when open and close the doors, but we fix that. the mirrors are dimming, right one go down on reverse, open and close from door button but no remote....when we enable the remote (comfort) in CAS the windows and roof go togather to open from begining
So my car has memory seats and mirror dipping and dimming rear view mirror so i just have to install the new switch with the button and folding mirrors and code it?
I did describe you the problem with remote in your clip for remote open/close. when we enable the comfort in CAS , the windows go all the way down without to keep pushing the key button and from begining (same time ) start to open the roof. no any move for closing even windows- maybe because go togather with roof (last update cancel the roof closing).all that happend after i unpluged the 3pin mirror conector at ignition ON.... 10x
Hi, do you have another video showing how to recode the CAS and FRM module and how to enable remote closing? Any website or link for the detail information and what equipment do I need to recode? I am really appreciate for your great help. Thanks a million!
Hi, Remote closing is very easy, you only have to manipulate your FRM module and enable it. Your dealer can do it (this is one of the few things your dealer can modify for you) Kind regards! De nada!
Hola,muchísimas gracias antes que nada por tu vídeo. Yo tengo un bmw e90 sin asientos con memoria ni tampoco eléctricos, he comprados un par de espejos con plegado automático,viendo tu vídeo dices que hay que añadir algún cableado extra¿? Que cableados debo añadir? Desde el módulo Frm al espejo que pines hay que cabrear? Muchas gracias por la ayuda. saludos
Hola, En tu caso es bastante más complejo. Tienes que MODIFICAR el cableado (no añadir). Los espejos plegables llevan 3 hilos. - Positivo a batería (de los que cortan a los 15 minutos de haber cerrado el coche para poder cerrar los espejos desde la llave pero que no drene la batería si pasas largos periodos con el coche cerrado), - Masa a cualquier peine de masas o a tornillo de chasis. - Bus LIN al FRM. (hay 2 pines LIN uno para cada puerta) Aparte necesitas cambiar la botonera puesto que la plegable también necesita LIN, y darle señal LIN. Te recomiendo que te mires el WDS/Esquema y compares ambos. No es complejo pero requiere conocimientos y pericia. Saludos.
@@JoseJJn buenas y gracias d nuevo por responder tan pronto, no te preocupes por que algo me manejo... he cambiado ya en mi e90 modulo fmr1 a fmr2 e readaptado volante multifuncion, control de crucero, sensor de luz y de lluvia...y algunas cosas mas, es decir estoy familiarizado con todo esto, pero claro de los espejos plegables electricamente no veo mucha informacion o tutoriales. la cosa es que se que en el modulo fmr hay 2 pines que corresponden al pin BUS lin para puerta conductor y copiloto ( pin 23 y 22 ) pero no se si es el unico pin que hay que llevar a la puerta del copiloto y a que pin seria? y si hay que meter algun cable mas? el WDS/Esquema donde puedo encontrarlo? no se como tener acceso a ello?. Muchas gracias nuevamente. Saludos
@@seatpando Cierto, es un e90 por lo que ya lleva LIN para las ventanas traseras (en el e92 no hay ventanas y por tanto no hay LIN) El e90 es probable que el espejo del conductor te funcione nada más cambiar (y codificar el FRM para $313 ó $431 si son fotocromáticos) En su día, hice un tutorial para BMWFAQ cuando se los reequipé a Cañass (www.bmwfaq.org/threads/reequipacion-espejos-abatibles-y-fotocromaticos.715926/) Cambiado cables en la propia puerta del conductor, que está conectada al acompañante, te ahorras tocar nada en el acompañante o dentro del coche. Como te comento, lo hice hace mucho tiempo y no tengo a mano los esquemas... Si tienes el ISTA, ahí vienen. Si no, te toca buscar WDS por internet o torrent... Saludos.
@@JoseJJn buenas de nuevo compañero, pues muchisimas gracias entonces, el enlace tutorial que me has dejado ya fué eliminado desgraciadamente, no obstante creo que podré apañarmelas, al final solo es conectar el cable lin bus a la puerta del copiloto y ya esta...intentaré apañarmelas y sacar el cable desde el fmr hasta la puerta del copiloto. por que en la puerta del conductor me va a ser muy dificil para identificar que cable es cada uno. gracias nuevamente por tu ayuda
Hi 4Stasss, There are many references depending on if you have M Packet (Shadow line) or not, If your car is a sedan, the mirrors are different too. Here are mine (For e92/e93 without shadow line and autodimming function): - 51167176179 mirror - 51167176180 mirror - 51167144303 heated and autodimming glass - 51167144304 heated and autodimming glass I didn't think about M3 because they are more expensive and I need the caps too (and I would have to paint them too)
Officially you cannot do that because there are no auto dimming wing mirrors without power folding feature. The power folding feature is driven by a LIN controller and also the dimming feature. I am not sure but maybe you can cheat the system adding only the auto dimming glasses and routing a pair of wires between the glasses and the inner auto dim mirror. I have never tried that so I cannot confirm this would work. Let us know your progress and good luck!
Hey buddy. Retrofitted power folding mirror on G30 RHD. Passenger side mirror power folding is working but driver side not. Someone advised needs additional wiring!!! Any help from you for wiring guide? TIA
Furthermore, here in Spain you could have problems with the Statal Periodic Inspection (every other year) if your pieces aren't OEM. If you want an aftermarket piece or a piece not mounted from factory (like M3 OEM mirrors or bigger rims, lower springs...) you have to pay for its homologation or if police catch you, you will have to pay a fine. Regards
You need to change the LIN controllers of the mirrors (black roundel behind the painted caps) and also the glasses. Expensive parts. You can find the glasses at ebay chaper than your dealer but the lin controllers are very difficult to find, Better get them at your dealer (100USD each) Regards
He I dont remeber if I answered you. If not, you need a pair of electric foldable mirrors (and autodimming if you want) and also the power windows unit for the driver side. In your case, since your mirrors are the basic one, you will hace to modify the wiring for the passenger mirror. The scripts are all over the internet and they are not so difficult to find. The part numbers depends on your equimpent (inner color, M-Sport Paket...)
Are you refearing to an e60 serie? For e60 is more or less the same, you need the pair of mirrors, the switches and some wire. Then the process is very similar, but you dont have a FRM but a KGM module. Regards.
hi i have a 2008 E92, i want to add the electric folding mirrors, does my car have to have any pre-exisitng wiring loom in the car for it to work? you video shows just changing the switch on the door panel and the actually wing mirror itself, is that all? im not fussed about auto dimming, although for that part is there any extra work needed? thanks
This is really cool! What code did you add to NFRM and CAS to make the remote control working? I have an 2012 E93 325 with built-in power mirror but I cannot make the folding function work with remote key. I had the same option ASP_xxx changed in NFRM on my E90 320 and got it worked. Could you please kindly advice? Thanks!
Hi Jose, I got a second hand F10 520d, apparently it does not the fold-able side mirror option since I do not have the folding button on the driver panel. ii am planing to install a side mirrors with folding motors and a new door switch board. please advise if additional wiring job is required. by the way the car is made in 2015 (LCI). appreciate your advise.
Yes... a lot more. Because you have 'semi-electric' seats so you dont have LIN bus in your doors. It is doable (I have done it many times) but it is not plug&play. You have to run both LIN bus wires from FRM to each mirror/controller and run a KL30 line too.
If I understand this right, beside the glass I also need to replace drive motor (for adjusting mirror position) which has a LIN bus (part number 67 13 7 191 398)? Thank you!
Te toca recablear el espejo del acompañante para llevar las líneas LIN, Power y GND al mismo desde el módulo FRM que se encuentra en el reposapiés junto al embrague. El del conductor funciona con el cableado de serie.
hi josejjn. I've got an e92 2008 with the electric seats. would i need any extra wiring also how do i get it coded. should i buy the ncs expert software and cable and try and do it myself. thanks.
Hello so i have bmw e90 lci with no power folding and when reversing to go down mirror, just basicly electric mirros, will it fit if i buy power folding reversing mirror on my e90? Or will not?
Hello Jose! I have one E90 with manual seats and auto dimming mirror inside the car. I updated the interior auto-diming mirror a few mounths ago, and now i want update the side mirror too. I want update them just to dimming function, without folding. In this case, what is the extra wires that i need? Regards André
Hola JoseJJN! Enhorabuena por tu brico!!! Estaba pensando en hacerlo yo en mi 120d, y la cuestión es que tengo espejos eléctricos y espejo interior fotocromático. Sería tan fácil como comprar los espejos completos, conectarlos y codificar un nuevo VO en el NCS Expert?? Se podría hacer cambiando únicamente el espejo en sí? Gracias!
Yes, you are right but they are NOT the motors, but the controllers of the motors. You need both (be careful! they are different part numbers for left and right!)
Do you happen to know how to do this feature on a 2002 bmw 530i I have manual folding mirrors. I Recently purchase the driver window switch with folding mirror and passenger module I'm still looking for the mirrors not m5 style tho. Can u help plz
hi,Jose, I have E93 like yours ! I guess my problem is in the CAS module , but I do not know all the parameters that are in conection with the remote operations. I can not also understand all of them, because of the short words used . My plan is to safe all the cas file from another car and to compare with mine ! Do You know the parameters that are in conection with remote operating? greetings
Hello again Jose , please can You tell me the exact parameter need to be changed in the CAS so I can close the mirrors from the key remote ? We add to my CAS all the file from E90 and remote close was able , but we couldn't find the different parameter ! thanks
Hi, thank for this video. I have bought folding mirrors with auto dim for my mini F56 2014. They have a 3 pin connector. I discovered later that my car has a 5 pin connector. What is the difference between these connectors and is it easy to convert? I read something about the 3 pin being a bus system?? I hope you can help me out a bit with this.
Kind of a longshot since the video is so old but ill ask anyways. Ive seen your video as well as the forum posts regarding this and managed to retrofit power folding mirrors with great success besides one problem. My car has from factory power folding seats with memory and the interior autodimming mirror(431). So i retrofitted power folding mirrors with autodim. Used ncs expert to add option 430 to VO and wrote that to CAS and FRM. The mirrors are folding fine but for some reason the autodimming for side mirrors does not want to work. Any suggestions? Thanks for all the info already, been to great help!
Which car? If you have 431 from factory and power folding mirrors are working properly, then there is no reaseon why wing mirrors are not dimming. Have you checked both FRM and FZD coding parameters? Regards.
Hola, Efectivamente cambiando los espejos completos por los fotocromáticos y agregando 431 al VO y recodificando el FRM te irán perfectamente. Si no quieres cambiar los espejos completos necesitarás: - La pareja de cristales fotocromáticos - La pareja de controladores LIN (los cableados internos de cada espejo y la pastilla negra de donde salen) No son piezas baratas... Un saludo!
Hi Jose, Thanks for the retrofit I just want to do it also ! One question about it : I already have the folding function in my side mirrors (E90). Do I have to change the whole mirror or could I only change the glass to obtain the auto dimming feature ? Thanks a lot Regards Ludovic
No extra wires are needed as long as you have either memory or folding mirrors (3 Wires connection) If you have 5 wires (basic mirrors) then you have to modify your wiring system to 3 (Power, Ground, Data LIN Bus) Regards.
Hi Jiajun Fei, I didn't add any code to de VO for remote closing. I had only changed these codes: - Enable remote control for mirrors at CAS - Enable comfort closing for mirrors at FRM Regards.
mine also are doing every single thing yours do now except the remote closing :( i'm not an expert of coding but i think i can learn thanks Jose muchas gracias :d
at 2min 14 in the video 'And unplug it !' - could you ellaborate here please - I find the cable doesn't come away easily, do I have to push down and back ?
hi, someone stole my passenger side. i bought a new one but its a 3pin....mine is a 5pin holder, how can i bypass to only make the heated mirror work? was considering getting folded mirrors but i know some fool will steal it. but anyways if you have any idea on how to just focus on heated glass that will be a great help.
Which body? E90 or E92? Then you will have 5 pin mirrors. This is a totally different case. I know how to do it but I dont have any DIY for that retrofit. Regards
In that case, it is totally different. You have to install LIN Bus between the FRM module and both left and right mirror. In addition, you have to install LIN Bus to the power window buttons at driver's door. After that, install power lines (possitive and negative) so finally you have 3 wires for each mirror (insted of 5 wires) Code it adding $313 or $430 depending on the mirrors you have installed and that is all. Best regards.
cabrio (e93) like yours...))), maybe i need to add the power folding mirrors as option to my car, maybe the car do not initialise them or pls read down my other coments regarding my problem... greetings
Hi, I have a bmw e90 320D M Sport 2007 Can someone please help me or guide me on how to install power folding mirrors. I am so lost.. not sure what extra wiring is required etc
My car is E92 2010 335i coupe (No premium , cold winter and sport pkg) with power mirror and memory seats. The right mirror can dip down while backing up. I don't have folding mirror function (no folding button on panel) and I want to get a foldable M3 OEM side mirror to install and recode the CAS and FRM. Is it possible for me to do it with an M3 mirror to make it foldable on the E92 335 coupe? Thanks,
If your seats have memories (1,2 and M button) you only need to swap the mirrors and the driver's windows switches. Then recode them. Yes, you can do it with NCS and OBD-DCAN. You only have to add the new equipment and recode the car for this new feature. Regards.
i have the BMW E90 2006 year. i change mirrors but its not work. i have this mirror and it has 5 Connector image.geotorrents.com/images/59410032241977602606.jpg And which mirror I bought has 3 connector image.geotorrents.com/images/45025177556778036695.jpg
![NCS EXPERT - Coding Folding Mirrors [E60]](http://i.ytimg.com/vi/uKti4UgVqNo/mqdefault.jpg)
Hi,
This is not simple. You need the mirror (glass) and also the LIN controllers with autodim feature.
They are the black roundels behind the plastic caps where the wires comes from. The costs around 100€ each at your dealer (plus glasses...)
You don't need extra wire from inner and side mirrors, they are communicating through a data bus (CAN & LIN) so it is almost plug&play.
You also will need to recode some modules for get them working.
Hi,
Unless your car has memory seats, you will have to rewire the mirrors to the FRM module.
This is because you need to add LIN bus between them. I have done it successfully in many cars.
I already have auto dimming inner rearview mirror and I'm thinking about upgrading my side mirrors into auto dimming ones too. It's enough just to replace the side mirrors (only the mirrors, without whole mirror housing) with ones with auto dimming function or I need to do something more? Is wire harness between inner and side mirrors for activating auto dimming already there? Thank you!
e93 like yours. I guess , I need to change some in CAS, because when i instal the mirrors I unplug one of them with ignition ON and some parameters change (like reset) - cold turn signal bulb check, windows didnt move up and down a bit when open and close the doors, but we fix that. the mirrors are dimming, right one go down on reverse, open and close from door button but no remote....when we enable the remote (comfort) in CAS the windows and roof go togather to open from begining
So my car has memory seats and mirror dipping and dimming rear view mirror so i just have to install the new switch with the button and folding mirrors and code it?
I did describe you the problem with remote in your clip for remote open/close. when we enable the comfort in CAS , the windows go all the way down without to keep pushing the key button and from begining (same time ) start to open the roof. no any move for closing even windows- maybe because go togather with roof (last update cancel the roof closing).all that happend after i unpluged the 3pin mirror conector at ignition ON....
10x
Really stylishly well put together video ..Be saving this ...
Hi, do you have another video showing how to recode the CAS and FRM module and how to enable remote closing? Any website or link for the detail information and what equipment do I need to recode? I am really appreciate for your great help. Thanks a million!
Hi,
Remote closing is very easy, you only have to manipulate your FRM module and enable it.
Your dealer can do it (this is one of the few things your dealer can modify for you)
Kind regards!
De nada!
Hola,muchísimas gracias antes que nada por tu vídeo. Yo tengo un bmw e90 sin asientos con memoria ni tampoco eléctricos, he comprados un par de espejos con plegado automático,viendo tu vídeo dices que hay que añadir algún cableado extra¿? Que cableados debo añadir? Desde el módulo Frm al espejo que pines hay que cabrear? Muchas gracias por la ayuda. saludos
Hola,
En tu caso es bastante más complejo. Tienes que MODIFICAR el cableado (no añadir).
Los espejos plegables llevan 3 hilos.
- Positivo a batería (de los que cortan a los 15 minutos de haber cerrado el coche para poder cerrar los espejos desde la llave pero que no drene la batería si pasas largos periodos con el coche cerrado),
- Masa a cualquier peine de masas o a tornillo de chasis.
- Bus LIN al FRM. (hay 2 pines LIN uno para cada puerta)
Aparte necesitas cambiar la botonera puesto que la plegable también necesita LIN, y darle señal LIN.
Te recomiendo que te mires el WDS/Esquema y compares ambos. No es complejo pero requiere conocimientos y pericia.
Saludos.
@@JoseJJn buenas y gracias d nuevo por responder tan pronto, no te preocupes por que algo me manejo... he cambiado ya en mi e90 modulo fmr1 a fmr2 e readaptado volante multifuncion, control de crucero, sensor de luz y de lluvia...y algunas cosas mas, es decir estoy familiarizado con todo esto, pero claro de los espejos plegables electricamente no veo mucha informacion o tutoriales. la cosa es que se que en el modulo fmr hay 2 pines que corresponden al pin BUS lin para puerta conductor y copiloto ( pin 23 y 22 ) pero no se si es el unico pin que hay que llevar a la puerta del copiloto y a que pin seria? y si hay que meter algun cable mas? el WDS/Esquema donde puedo encontrarlo? no se como tener acceso a ello?. Muchas gracias nuevamente. Saludos
@@JoseJJn tambien he comprado la botonera nueva, hay que cablear tambien la botonera? tenia entendido que no.
gracias
@@seatpando Cierto, es un e90 por lo que ya lleva LIN para las ventanas traseras (en el e92 no hay ventanas y por tanto no hay LIN)
El e90 es probable que el espejo del conductor te funcione nada más cambiar (y codificar el FRM para $313 ó $431 si son fotocromáticos)
En su día, hice un tutorial para BMWFAQ cuando se los reequipé a Cañass (www.bmwfaq.org/threads/reequipacion-espejos-abatibles-y-fotocromaticos.715926/)
Cambiado cables en la propia puerta del conductor, que está conectada al acompañante, te ahorras tocar nada en el acompañante o dentro del coche.
Como te comento, lo hice hace mucho tiempo y no tengo a mano los esquemas... Si tienes el ISTA, ahí vienen. Si no, te toca buscar WDS por internet o torrent...
Saludos.
@@JoseJJn buenas de nuevo compañero, pues muchisimas gracias entonces, el enlace tutorial que me has dejado ya fué eliminado desgraciadamente, no obstante creo que podré apañarmelas, al final solo es conectar el cable lin bus a la puerta del copiloto y ya esta...intentaré apañarmelas y sacar el cable desde el fmr hasta la puerta del copiloto. por que en la puerta del conductor me va a ser muy dificil para identificar que cable es cada uno. gracias nuevamente por tu ayuda
Hi 4Stasss,
There are many references depending on if you have M Packet (Shadow line) or not, If your car is a sedan, the mirrors are different too.
Here are mine (For e92/e93 without shadow line and autodimming function):
- 51167176179 mirror
- 51167176180 mirror
- 51167144303 heated and autodimming glass
- 51167144304 heated and autodimming glass
I didn't think about M3 because they are more expensive and I need the caps too (and I would have to paint them too)
Officially you cannot do that because there are no auto dimming wing mirrors without power folding feature.
The power folding feature is driven by a LIN controller and also the dimming feature.
I am not sure but maybe you can cheat the system adding only the auto dimming glasses and routing a pair of wires between the glasses and the inner auto dim mirror. I have never tried that so I cannot confirm this would work.
Let us know your progress and good luck!
Hey buddy. Retrofitted power folding mirror on G30 RHD. Passenger side mirror power folding is working but driver side not. Someone advised needs additional wiring!!! Any help from you for wiring guide? TIA
Furthermore, here in Spain you could have problems with the Statal Periodic Inspection (every other year) if your pieces aren't OEM.
If you want an aftermarket piece or a piece not mounted from factory (like M3 OEM mirrors or bigger rims, lower springs...) you have to pay for its homologation or if police catch you, you will have to pay a fine.
Regards
You need to change the LIN controllers of the mirrors (black roundel behind the painted caps) and also the glasses.
Expensive parts.
You can find the glasses at ebay chaper than your dealer but the lin controllers are very difficult to find, Better get them at your dealer (100USD each)
Regards
He I dont remeber if I answered you. If not, you need a pair of electric foldable mirrors (and autodimming if you want) and also the power windows unit for the driver side.
In your case, since your mirrors are the basic one, you will hace to modify the wiring for the passenger mirror.
The scripts are all over the internet and they are not so difficult to find.
The part numbers depends on your equimpent (inner color, M-Sport Paket...)
Are you refearing to an e60 serie?
For e60 is more or less the same, you need the pair of mirrors, the switches and some wire.
Then the process is very similar, but you dont have a FRM but a KGM module.
Regards.
What is the parts number of the mirror switch?
hi i have a 2008 E92, i want to add the electric folding mirrors, does my car have to have any pre-exisitng wiring loom in the car for it to work?
you video shows just changing the switch on the door panel and the actually wing mirror itself, is that all? im not fussed about auto dimming, although for that part is there any extra work needed?
thanks
This is really cool! What code did you add to NFRM and CAS to make the remote control working? I have an 2012 E93 325 with built-in power mirror but I cannot make the folding function work with remote key. I had the same option ASP_xxx changed in NFRM on my E90 320 and got it worked. Could you please kindly advice? Thanks!
Hi there, I went to the car wash after that the driver side control doesn't work at all. so, what should i do at the beginning?
Hi Jose, I got a second hand F10 520d, apparently it does not the fold-able side mirror option since I do not have the folding button on the driver panel. ii am planing to install a side mirrors with folding motors and a new door switch board. please advise if additional wiring job is required. by the way the car is made in 2015 (LCI). appreciate your advise.
Ive got power seats but no memory, will this still require the extra work?
Yes... a lot more. Because you have 'semi-electric' seats so you dont have LIN bus in your doors.
It is doable (I have done it many times) but it is not plug&play. You have to run both LIN bus wires from FRM to each mirror/controller and run a KL30 line too.
Hi Jose, pls can You tell me how do i need to code the CAS and FRM? I can not close and open from the remote....
greetings
I don't have power seats with memory, what extra wiring should I do?
Do you have memory mirrors? If not, you need to rewire the whole installation.
You can try either your dealer or eBay and used parts.
If I understand this right, beside the glass I also need to replace drive motor (for adjusting mirror position) which has a LIN bus (part number 67 13 7 191 398)? Thank you!
Te toca recablear el espejo del acompañante para llevar las líneas LIN, Power y GND al mismo desde el módulo FRM que se encuentra en el reposapiés junto al embrague.
El del conductor funciona con el cableado de serie.
hi josejjn.
I've got an e92 2008 with the electric seats. would i need any extra wiring also how do i get it coded. should i buy the ncs expert software and cable and try and do it myself.
thanks.
Hello so i have bmw e90 lci with no power folding and when reversing to go down mirror, just basicly electric mirros, will it fit if i buy power folding reversing mirror on my e90? Or will not?
Hello Jose!
I have one E90 with manual seats and auto dimming mirror inside the car. I updated the interior auto-diming mirror a few mounths ago, and now i want update the side mirror too. I want update them just to dimming function, without folding. In this case, what is the extra wires that i need?
Regards
André
Hola JoseJJN!
Enhorabuena por tu brico!!! Estaba pensando en hacerlo yo en mi 120d, y la cuestión es que tengo espejos eléctricos y espejo interior fotocromático. Sería tan fácil como comprar los espejos completos, conectarlos y codificar un nuevo VO en el NCS Expert?? Se podría hacer cambiando únicamente el espejo en sí?
Gracias!
Yes, you are right but they are NOT the motors, but the controllers of the motors.
You need both (be careful! they are different part numbers for left and right!)
I have 2004 bmw 530i with memory seat with non fold mirror like to upgrade them to 545i can I do the same thing ?
Do you happen to know how to do this feature on a 2002 bmw 530i I have manual folding mirrors. I Recently purchase the driver window switch with folding mirror and passenger module I'm still looking for the mirrors not m5 style tho. Can u help plz
hi,Jose, I have E93 like yours ! I guess my problem is in the CAS module , but I do not know all the parameters that are in conection with the remote operations. I can not also understand all of them, because of the short words used . My plan is to safe all the cas file from another car and to compare with mine ! Do You know the parameters that are in conection with remote operating?
greetings
Can you post the part number needed for the E93 LCI RHD ?
Hello again Jose , please can You tell me the exact parameter need to be changed in the CAS so I can close the mirrors from the key remote ? We add to my CAS all the file from E90 and remote close was able , but we couldn't find the different parameter !
thanks
Hi, thank for this video. I have bought folding mirrors with auto dim for my mini F56 2014. They have a 3 pin connector. I discovered later that my car has a 5 pin connector. What is the difference between these connectors and is it easy to convert? I read something about the 3 pin being a bus system?? I hope you can help me out a bit with this.
Kind of a longshot since the video is so old but ill ask anyways.
Ive seen your video as well as the forum posts regarding this and managed to retrofit power folding mirrors with great success besides one problem.
My car has from factory power folding seats with memory and the interior autodimming mirror(431).
So i retrofitted power folding mirrors with autodim. Used ncs expert to add option 430 to VO and wrote that to CAS and FRM. The mirrors are folding fine but for some reason the autodimming for side mirrors does not want to work. Any suggestions?
Thanks for all the info already, been to great help!
Which car?
If you have 431 from factory and power folding mirrors are working properly, then there is no reaseon why wing mirrors are not dimming.
Have you checked both FRM and FZD coding parameters?
Regards.
Hola,
Efectivamente cambiando los espejos completos por los fotocromáticos y agregando 431 al VO y recodificando el FRM te irán perfectamente.
Si no quieres cambiar los espejos completos necesitarás:
- La pareja de cristales fotocromáticos
- La pareja de controladores LIN (los cableados internos de cada espejo y la pastilla negra de donde salen)
No son piezas baratas...
Un saludo!
How do you go about coding the CAS and FRM ? Do you have a guide for that?
Hi Jose,
Thanks for the retrofit I just want to do it also !
One question about it : I already have the folding function in my side mirrors (E90).
Do I have to change the whole mirror or could I only change the glass to obtain the auto dimming feature ?
Thanks a lot
Regards
Ludovic
Hi! Don't you need an extra wire for this? Or it's plug and play? My car doesn't have folding mirrors
No extra wires are needed as long as you have either memory or folding mirrors (3 Wires connection)
If you have 5 wires (basic mirrors) then you have to modify your wiring system to 3 (Power, Ground, Data LIN Bus)
Regards.
@@JoseJJn thank you!
Thank you for your video!
Do you know where can I buy power folding side mirrors for my BMW 3 series , 320i (2010) ?
did you find any place to buy? I'm looking as well
There are many options.
The best one is buying an ICOM interface with ISTA software.
Hi Jiajun Fei,
I didn't add any code to de VO for remote closing.
I had only changed these codes:
- Enable remote control for mirrors at CAS
- Enable comfort closing for mirrors at FRM
Regards.
Can you let me know what coding software and cable I need also where I can get them please I'm in the uk. Maybe eBay. Thanks
Recently bought a new mirror. How do I recode the CAS and FRM module in order to get them both working and folding in as it should
If you already had folding mirrors it should be plug&play mate...
Regards
where do you buy these from
mine also are doing every single thing yours do now except the remote closing :(
i'm not an expert of coding but i think i can learn
thanks Jose muchas gracias :d
Hi guys i have BMW E90 LCI and only electric seats but no memory option so i will still need some additional wiring?
at 2min 14 in the video 'And unplug it !' - could you ellaborate here please - I find the cable doesn't come away easily, do I have to push down and back ?
hi, someone stole my passenger side. i bought a new one but its a 3pin....mine is a 5pin holder, how can i bypass to only make the heated mirror work? was considering getting folded mirrors but i know some fool will steal it. but anyways if you have any idea on how to just focus on heated glass that will be a great help.
I bought them in ebay but you can find it at your dealer too.
Where can I buy these mirrors and switch? Besides the BMW stealer?
Hi there.
I'm planning to do this, but i have no power seat with memory...what i need to make them work?
Which body? E90 or E92?
Then you will have 5 pin mirrors. This is a totally different case.
I know how to do it but I dont have any DIY for that retrofit.
Regards
Bmw 123d (2007) E81, series 1...
*****
The same procedure than BMW e92.
PM me for details.
Jose_Jn BMW HiTech Retrofitments & Coding I wrote you using Hangouts, i can't find other ways to send you pm! TH-cam is changed a lot recently!
+Jose_Jn BMW HiTech Retrofitments & Coding Will this work for an 06 BMW e60? Im interested in buying one
I have a E65/66 2007 740i Sport .
the folding mirrors will not fold in or back out is there a coding system for them
+Raj Avtar singh Panesar they need to be coded in - comfort access coding
What more do I need if i dont have Power Seats with memory? I have standard manual seats, but inner mirror with autodimming.
In that case, it is totally different.
You have to install LIN Bus between the FRM module and both left and right mirror.
In addition, you have to install LIN Bus to the power window buttons at driver's door.
After that, install power lines (possitive and negative) so finally you have 3 wires for each mirror (insted of 5 wires)
Code it adding $313 or $430 depending on the mirrors you have installed and that is all.
Best regards.
Just got a quick question about recoding your CAS and FRM module, is it possible to do this by yourself? If not where can I get it done?
I have a BMW f36 where can I purchase folding mirror besides BMW dealership?
Hi do you have the old part of the windows switch? I need it!:)
can this work for an e60 525i?
Pretty awesome DIY JoseJJN
Thanks again for the help, PMd via e90post!
Coupe or cabrio?
cabrio (e93) like yours...))), maybe i need to add the power folding mirrors as option to my car, maybe the car do not initialise them or pls read down my other coments regarding my problem...
greetings
i dont want auto dimmimng any way of stopping this on my 3series
Hi,
I have a bmw e90 320D M Sport 2007
Can someone please help me or guide me on how to install power folding mirrors. I am so lost.. not sure what extra wiring is required etc
My car is E92 2010 335i coupe (No premium , cold winter and sport pkg) with power mirror and memory seats. The right mirror can dip down while backing up. I don't have folding mirror function (no folding button on panel) and I want to get a foldable M3 OEM side mirror to install and recode the CAS and FRM. Is it possible for me to do it with an M3 mirror to make it foldable on the E92 335 coupe? Thanks,
Hello. Could you PM me the detalj about retrofit ting these on a E82 123d?
I dont have electric seats btw..
If your seats have memories (1,2 and M button) you only need to swap the mirrors and the driver's windows switches.
Then recode them.
Yes, you can do it with NCS and OBD-DCAN. You only have to add the new equipment and recode the car for this new feature.
Regards.
Do you have video showing how to add the code to the VO?
i have the BMW E90 2006 year. i change mirrors but its not work.
i have this mirror and it has 5 Connector
image.geotorrents.com/images/59410032241977602606.jpg
And which mirror I bought has 3 connector
image.geotorrents.com/images/45025177556778036695.jpg
You have to run some wires from the FRM module to the mirros.
You need LIN Bus and power.
Regards
Give me a few time and I will answer you.
Thank you