Hi Sir Jaypi nag home Service kaba? Miron kc akong Sony MHC GNV99D component mi display , no sound , sira din CD Player . Dito a ko sa better living Parañaque .Recomended ka ni Basic Bob.
yes po. for appointments, visit our facebook page. Type in Jaypi Tech PH, Go to Services tab and tap message along with "Home Service (Component Repair)
Nice one idol! Idol may binigay skin n bose speaker n may amplifier kya lng iba ung input audio ndi q magamit, magawa kya ng paraan un? PS28 Power speaker
@@digantabayan2649 there is no other way to modify. If you want to work 5.1ch, you need to rewire the inputs. (Note that if you do this, 5.1ch might work but no sound enhancements.)
The voltage on the SPEANA IC pin is showing 8.76 instead of 4.6. Is this why the spectrum and illumination are not working? Will changing the input ic fix it?
I have a Sony MHC GNV99d. Issue with my hifi is that the screen dosent work. Its very dim you can only see it at night time. Do you what the issue could be?
Sir mga magkano po ang pagpaayos ng Sony MHC GN88? May unit po akong ganyan... nakakapanghinayang dahil ok pa ang mga speakers nya! Saan po ba shop nyo?😊
Sir my self Amit I am BE Electronic teacher also doing small Electronics project for BE Student MY Problem is Sir MY Sony DVD player GN77D 4600w MD INPUT is only 2 channel Stereo INPUT Only. Sir I want to get 5.1 audio Input how to find which track in PCB board if you know please guide me. or how get 5.1 audio INPUT. Please guide sir.
There is no 5.1 CH input on that compo. you need to remove the DMB Board in order to access the DVD inputs. you may check out on service manual for pinouts.
sir if you start prologic option that's movie & music too in system only that can helps you to reach 5.1 sound out put on your system. 2nd thing Press MD button & power off button same time of system AMp you can see Video mode is activated on screen checkout sound now you get more than MD.
@@JaypiTechPHOfficial Hello, thank you very much for sharing it. That sony sounds good, the truth is here in Mexico I had the Gn800 with everything and a subwoofer (5 speakers total) and the equipment sounded beastly. Too bad I had to sell it, it was one of the best that I had the privilege of rescuing. Greetings.
@@JaypiTechPHOfficial Yes, I sold it out of necessity and because I used it little even though everything worked for it, but I am planning to get another one just like it, here I have the subwoofer and two surround speakers from gn800, only the two front ones and the amplifier are missing. Just a few days I got the head of the GNX88 that does not turn on, practically burned out from the transformer and I have a plan to place the amplifier of this to a Gnx880 or a gtx88. What I think is working or at least I rule out that it is damaged is the power amplifier.
@@ferzaldivar_mxj800 that's unfortunate. The main transformer busted. Just like my last live video recently. Good thing I got the exact replacement. That is Sony MHC-GN88D
Sir respect you love from india just becoz of you i started my uncle system VX888. Now i bought one system from scrap Sony GN100D If possible then plz for GNZ100D full service & how to solve there is no standby come up & also system was not working. I changed 1 faulty 100ohms resistance but still not turning. help me!
@@JaypiTechPHOfficial Ok sir but that actual i don't know how to check & solve, there is no any other video on youtube, If you make it your are the One. In india so many system are scraped just beoz technician no having idea to ride this fully dead power issue. Sir help me out plz you can research it on youtube there is no video if i am not wrong.
boss tanong lang po kapag ba pinalitan ng bagong kahoy ung speaker magbabago na quality ng tunog nya? nabasa kasi ng ulan yung pinaka kahoy ng speaker ko kaya parang namaga tapos kumalat na sya
th-cam.com/video/G0DaRodRktI/w-d-xo.html Here is the solution. It's the same as VX777 Problem. The difference is it triggers protect blink red issue. I will discuss the same unit on my next vlog (to be published soon)
Paano pakinisin ang Front Panel ni Sony? Go to 17:15
This portion was brought to you by:
Joy dishwashing liquid
Isang patak, mabisang edits
@@JohnPaulmerGuanlaoAlcantara HAHAHAHA
@@JaypiTechPHOfficial instant advertisement 🤣🤣🤣
Excellent Sir ❤️❤️❤️🙏🙏🙏
nice admin'' galing u tlga 👍👍👍
saanpo kayo may brance sa batangas city
waiting HAHAHA
süper(TÜRKEY)
Nice 👍👍👍👍👍👍👌👌👌👌👌
Nicee nicee!
Hi Sir Jaypi nag home Service kaba? Miron kc akong Sony MHC GNV99D component mi display , no sound , sira din CD Player . Dito a ko sa better living Parañaque .Recomended ka ni Basic Bob.
yes po. for appointments, visit our facebook page.
Type in Jaypi Tech PH, Go to Services tab and tap message along with "Home Service (Component Repair)
Sir Meron kapo board Sony MHC v11
Sana Meron kayo 😟
Wala pang nadaan sakin na unit na ganyan
Can you post a video of its repair?
awesome boss!!
laki ng transformer ah anong output voltage nung trans?
parang 70V ata output voltage. same lang to sa VX777
Nice one idol! Idol may binigay skin n bose speaker n may amplifier kya lng iba ung input audio ndi q magamit, magawa kya ng paraan un? PS28 Power speaker
Check ko mamaya sa online kung ano ang control center nya
Can you tell me how to get 5.1 surround sound in the Sony MHC-GN88D, if I connect Jio set top box with it through optical cable?
5.1ch is only available on DVD mode.
@@JaypiTechPHOfficial Is there any chance of modification to get 5.1 surround sound?
@@digantabayan2649 there is no other way to modify. If you want to work 5.1ch, you need to rewire the inputs. (Note that if you do this, 5.1ch might work but no sound enhancements.)
The voltage on the SPEANA IC pin is showing 8.76 instead of 4.6. Is this why the spectrum and illumination are not working? Will changing the input ic fix it?
Have you checked the service manual for voltage references?
Yes.service manual show's 4.6v but ic pin 8.76v
@ the SPEANA is damaged.
Will changing the input IC fix it?
@shibupm9465 probably.
I have a Sony MHC GNV99d. Issue with my hifi is that the screen dosent work. Its very dim you can only see it at night time.
Do you what the issue could be?
It might be an issue with the filter on the inside of an VFD display. You need to wipe it off in order to bring back true brightness of your display.
Sir mga magkano po ang pagpaayos ng Sony MHC GN88? May unit po akong ganyan... nakakapanghinayang dahil ok pa ang mga speakers nya! Saan po ba shop nyo?😊
For inquiries, paki bisita na lang po ang aking Facebook page.
facebook.com/JaypiTechPHOfficial
sir pwede magpaayos sayo ganyan ding component,
Visit our Facebook Page for inquiries.
Type in Jaypi Tech PH
Labada is career ,may trafo pa ako ng model na yan dito sa shop
Pa keep naman need ko. Thanks
@@JaypiTechPHOfficial sige na tabi ko lang dito nabaha na nga
Oks lang na nabaha sealed naman yan di basta pinapasok ng tubig
Sir my self Amit I am BE Electronic teacher also doing small Electronics project for BE Student MY Problem is Sir MY Sony DVD player GN77D 4600w MD INPUT is only 2 channel Stereo INPUT Only. Sir I want to get 5.1 audio Input how to find which track in PCB board if you know please guide me. or how get 5.1 audio INPUT. Please guide sir.
There is no 5.1 CH input on that compo. you need to remove the DMB Board in order to access the DVD inputs. you may check out on service manual for pinouts.
sir if you start prologic option that's movie & music too in system only that can helps you to reach 5.1 sound out put on your system. 2nd thing Press MD button & power off button same time of system AMp you can see Video mode is activated on screen checkout sound now you get more than MD.
Which filter should be cleaned to increase brightness?
The pink filter inside VFD. Remove your front panel PWB first.
Hello again, by chance could you share the name of the music that plays from 25:30 please, it would be appreciated.
Here my friend. But I'll put a download link later.
th-cam.com/video/QLLn72njycM/w-d-xo.html
@@JaypiTechPHOfficial Hello, thank you very much for sharing it. That sony sounds good, the truth is here in Mexico I had the Gn800 with everything and a subwoofer (5 speakers total) and the equipment sounded beastly. Too bad I had to sell it, it was one of the best that I had the privilege of rescuing. Greetings.
@@ferzaldivar_mxj800 oh it's interesting to see what GN800 look like. Well it's sad to say that you sell it because it is what it is. 😊
@@JaypiTechPHOfficial Yes, I sold it out of necessity and because I used it little even though everything worked for it, but I am planning to get another one just like it, here I have the subwoofer and two surround speakers from gn800, only the two front ones and the amplifier are missing. Just a few days I got the head of the GNX88 that does not turn on, practically burned out from the transformer and I have a plan to place the amplifier of this to a Gnx880 or a gtx88. What I think is working or at least I rule out that it is damaged is the power amplifier.
@@ferzaldivar_mxj800 that's unfortunate. The main transformer busted. Just like my last live video recently. Good thing I got the exact replacement. That is Sony MHC-GN88D
Sir respect you love from india just becoz of you i started my uncle system VX888. Now i bought one system from scrap Sony GN100D If possible then plz for GNZ100D full service & how to solve there is no standby come up & also system was not working. I changed 1 faulty 100ohms resistance but still not turning. help me!
Have you checked the secondary power supply for Ever +4V? If not, try checking it first.
@@JaypiTechPHOfficial Ok sir but that actual i don't know how to check & solve, there is no any other video on youtube, If you make it your are the One. In india so many system are scraped just beoz technician no having idea to ride this fully dead power issue. Sir help me out plz you can research it on youtube there is no video if i am not wrong.
@@patildinesh07 If I have one of these units to be serviced, I'll let you know.
@@JaypiTechPHOfficial Please & thank you so much for reply
boss tanong lang po kapag ba pinalitan ng bagong kahoy ung speaker magbabago na quality ng tunog nya? nabasa kasi ng ulan yung pinaka kahoy ng speaker ko kaya parang namaga tapos kumalat na sya
basta same size and dimension din yung box pwede naman, hindi naman magbabago resonant frequency.
@@JaypiTechPHOfficial maraming salamat po sa reply
sir sony component vx8 may sound pero garalgal hindi clear yun tunog.ano kaya yun problem nya??
STK411-240E ang sira pag distorted audio
@@JaypiTechPHOfficial salamat sir
San po nkakabili ng pyesa. Nagprotect po ung gnyan namin pag sinaksak tpos ini on namamatay po agad. Hnd na magttuloy na mag on
Mahirap maka order ng IC na original online
Hello sir, I have a stereo model SONY HCD GN70V. When it works, it turns off. What is the problem? I want to solve it.
th-cam.com/video/G0DaRodRktI/w-d-xo.html
Here is the solution. It's the same as VX777 Problem. The difference is it triggers protect blink red issue.
I will discuss the same unit on my next vlog (to be published soon)
@@JaypiTechPHOfficial hello po. Same problem of my sony component
@@sherylvictoria3599 visit our facebook page for inquiries.
Type in Jaypi Tech PH
Can you make a repearing vedio?
I don't have any units in repair to check on. But I'll keep posting about it
bro my dvd of sony mhc-gn100d doesnt worked. it said "please wait" cant open or everythin. how to fix it bro?
You need to replace the DMB board in order to respond to system. Or check your supply if all of them are present.
okay tx bro, i will watch your videos again, and askin if im not understand 👌 🙏
I have same model but power button starts blinking what is the problem not starting
Check main transformer first. check relay controller from standby board.
Also if the unit is in protect mode please check your STK ic first.
Spectrum not working.what to do
Check voltage on SPEANA pinout on the front panel board or MAIN PWB.
Or toggle the spectrum under AMP MENU
Both Spectram and Illumination are not working. Are these two connected? Is there any solution?
Check if ILLUMINATION is enabled.
Illumination and spectrum is on but not working
P file