Ran it on both air and vacuum and neither one made the engine run, even after oiling. Was a 0/10 until I hooked it up to an are/c car motor with a custom 54 tooth gear an ran it to a 9 tooth gear on the drive axle and it sounded like a v6, so I rate it a 2/10. I’m taking it apart to build another design of engine but if anyone has any suggestions on fixing it I’d be happy to rebuild the engine and try again with your suggestions.
Ran it on both air and vacuum and neither one made the engine run, even after oiling. Was a 0/10 until I hooked it up to an are/c car motor with a custom 54 tooth gear an ran it to a 9 tooth gear on the drive axle and it sounded like a v6, so I rate it a 2/10. I’m taking it apart to build another design of engine but if anyone has any suggestions on fixing it I’d be happy to rebuild the engine and try again with your suggestions.
Cool!
👍👍
sick
don’t forget to lubricate your engine
is this in reverse?
Yes indeed
Didn’t work, I’m sure I would be great but I built it all with no substitute parts and it wouldn’t run. Too much friction, any solution?
oil it