Thank you so much, Ive wanted to build one of these for ages but none of them worked, I thought my vacuum was too powerful but with this model it worked 'out the box'
PLEASE to all the people watching this, i’ve been crying my eyes out for 3 hours because the engine wouldnt run, and im sure it doesnt for some people too, the solution is to cover up the place where 1x4 L piece is, and that fixed everything, also not sure for others but for me turning the wheel anti clockwise from the perspective of the window made the engine run better, reached around 5k+ rpm
The good Thing on that one is, you can make an Butterfly engine out of it, by just adding and removing a few parts. You dont have to remove everything on it
Thank you, it works pretty well even though i didn’t have the exact same pieces. I will upload a video about it in my channel soon, i’ll give you credits.
I know it's been a year but I have a problem, I built this engine and it won't start, there's too much friction for the piston to move, any suggestions help, thanks
I have an issue, on the thing on the back under the throttle but infront if it, it keeps getting caught on the baseplate to cover the main piston- what did I do wrong? *when you reply to me, please mention so I will get notified*
So what if the piston is just being sucked to the top and that’s it. What’s the issue there? I sealed the L 1x4 block, I removed that idle block he put there, I put a bigger flywheel in there, but it ain’t spinning.
Hey so i dont have this what i think is a knuckle arm of some sort but can you tell me the name of the peice that makes the piston turn over please would mean alot
i don t think you still need an answer but i will tell you. i tried replacing it with a longer plate and it won t work. what i did is i asked a friend to 3d print it
Does ur vacuum have like a reverse setting and if so is that what your using, I don’t know if I did something wrong or just don’t have the right vacuum lmao
Click bait comments perhaps? The half 1x6 beam is just hitting the throttle piece and pushing it out of place. Built it 2 times from the video and it came out the same both times. ( 7:48 )
I've never thought engines could be made out of Lego, im gonna try it
Thanks I've been trying to make Lego engines with my own ideas but they never work so now I'm going to try doing it like this
👍👍👍
Thank you so much, Ive wanted to build one of these for ages but none of them worked, I thought my vacuum was too powerful but with this model it worked 'out the box'
i thought my vacuum was too strong but i didnt know i needed intake valves. I didnt think lego was that airtight.
Nice to see you on youtube! Great tutorial!
Took a few hours to find all appropriate parts but wow this is insane
Just spent an hour trying to find that whatever thing in the beginning, just to find it within 5 seconds in black
Extremely underated
Please do the others engine tutorials it's just amazing
thanks! i freeballd my first lego vacume engine with no tutorial this is way more easy and practical
Pretty crazy how fast LVE can go if you build them correctly
hi is there a list of all the pieces required somewhere ?
I'm making one by myself with random parts I find it's pretty cool
where can i get that small half crank piece
Mate thanks really helpful finally built one with a piston before I had a turbine
THIS FINNA BE MY BIGGEST BRAG I BEEN HERE SINCE 800
Do you ever experiment with using a longer or shorter stroke or just different cylinder dimensions in general?
for the piston part is it ok if i use a six by one?
PLEASE to all the people watching this, i’ve been crying my eyes out for 3 hours because the engine wouldnt run, and im sure it doesnt for some people too, the solution is to cover up the place where 1x4 L piece is, and that fixed everything, also not sure for others but for me turning the wheel anti clockwise from the perspective of the window made the engine run better, reached around 5k+ rpm
i’m so confused what 1x4 L piece? do you have a time stamp
@@jlester246:03, cover the top of the engine
What do you mean by cover-up?
Fucking sick didnt know i had all the parts will duet ur tiktok soon
i dont have a one long lift arm? what should i do
closest i have is a 7 long
or a 6 long half push arm? or 32063 piece name
amazing! what vacumm do you use because mine is a wireless one and does not work very well and its battery is like 40 second
The good Thing on that one is, you can make an Butterfly engine out of it, by just adding and removing a few parts. You dont have to remove everything on it
It runs smoothly 😌
Oh my god this is amazing plz make a turbo engine aswell
way better that other tutorials. i made the engine late at night and i have to test it tmr let you know if it works
Is there anything I can use instead of the little grey crankshaft piece? I only have one of them
Same😂
This is the second time I tried to build it the first time failed so this time I'm praying it will work because this looks so cool
Thx it works great and it’s loud❤😊
I couldn't get it to work :( I have need trying for hours
u should try and do a boxer engine. a flat 4. and try and get that subaru rumble
THANK U, U HELP ALL PEOPLE ON THIS PLANET!!!
Thank you, it works pretty well even though i didn’t have the exact same pieces. I will upload a video about it in my channel soon, i’ll give you credits.
I know it's been a year but I have a problem, I built this engine and it won't start, there's too much friction for the piston to move, any suggestions help, thanks
Hey so i just built this but when i plug in the vacuum and spin the flywheel by hand it spins once and then nothing. How can i fix this?
i have the same problem too
Thank you so much for this Tutorial ist worked Great
I have an issue, on the thing on the back under the throttle but infront if it, it keeps getting caught on the baseplate to cover the main piston- what did I do wrong? *when you reply to me, please mention so I will get notified*
Should I use a vacuum that blows air or sucks air?
My kids love it
I dont have the Walls for the cylinder are they important?
from where I can get the pieces which are required??
2:03 can I use a 7 long?
I made it exactly as in video but idk why it doesn’t work😕
i wish there was a list of all the pieces so i could order them
do a bunch of different types of engines
he does a bunch on tik tok
@mada the piston wouldnt go back down after being sucked up. happen to anyone else?
Yeah I have the same problem it's probably because of to small flywheel
@@leon.gtsports ah ok I’ll have to try a bigger one
@@esh-ts6zv I just tried it and it doesn't work but you should try too
@@leon.gtsports I’ll try it tomorrow it’s late for me
@@esh-ts6zv ok
Do you know what lego sets I need for this
So what if the piston is just being sucked to the top and that’s it. What’s the issue there? I sealed the L 1x4 block, I removed that idle block he put there, I put a bigger flywheel in there, but it ain’t spinning.
check the timing, should be 90 degrees
ive built everything right and when its off it spins perfectly but when i turn the vaccum on the vaccum sucks the valve and freezes jt in plase why?
I have a butterfly lve Lego engine and it works fine without the throttle, but when I try it with a throttle it doesn't work
This sooooo cool,I even built a clutch for it.
great tut but the valve keeps knocking off but the part around 7:32 that keeps getting hit off am i dumb or something i dont know how to fix it
I removed it and left it open
I don't have the half crank pieces but I still tried it and the piston won't stop blowing the head up
Without the vacuum I'm using a electric drill
Sadly, I don’t have a L piece.😢 But do you recommend any sets/places I could get them?
now that's a cool throttle
Great video keep it up
Hey so i dont have this what i think is a knuckle arm of some sort but can you tell me the name of the peice that makes the piston turn over please would mean alot
Do you need a vacuum that blows air because I tried one that sucks air and it didn’t work?or is mine just broken
5:00
If I don't have this part, can I replace it with something else?
i don t think you still need an answer but i will tell you. i tried replacing it with a longer plate and it won t work. what i did is i asked a friend to 3d print it
Thanks ive tried making them myself but i get so mad i smash it
Real
Do i have to use half crank piece? Or is it ok to use the one the main piston uses? Also great tutorial!
yes you need to, otherwise valve won't work properly
Hey, in the first shot for the piston parts is a gray piece would you happen to know the part number so i can order it? I cant find it 😭
41678
@@Mada_kr thanks man ill duet you when its finished
how do i do it with out using the stright things that will make the pistine go up and down pls ansewr im stressed
hello mada can you tell me what blocks are needed to make the base? I'm already doing everything but I only need the base :(
You can make your own design
Mine isnt that fast and it take time to start then it just goes for about 12 seconds at full throttle plz help me
Sounds menacing
What sets would I need to buy to build one
can you make a tutorial how to connect a supercvharger to it ? please
Thanks
Where do you get the pieces to make this?
Very awesome!
Is there another video I can see it on?
Hi could you do a tutorial for the 2x4 turbine?
Is it possible to build the valve with a normal 6 long liftarm instead of the 6 long half width liftarm?
probably
Just great, love it😅
What are you using for the vacuum
A link to some of these pieces would be nice but cool it is really loud.
Does ur vacuum have like a reverse setting and if so is that what your using, I don’t know if I did something wrong or just don’t have the right vacuum lmao
Nope, I'm using a normal vacuum. Nothing special
Do you need to shoot, or suck the air with the vacuum?
Is it okay if i use other parts instead of the showing ones with more holes? Is it for airflow?
if you’re referring to the one towards the end of the video, he said any part will do as it’s just for airflow:)
@@wrxbrayden748 ok thank u btw i built it but it soesn't work :(
How i get the piston piece?
4:59 is it possible to make this without that piece?
Yes, i just used a double axle slot piece shown here 0:53
Do yiu need the 41678 part? Of the piston cause i dont think o have one
Even after I made sure I had a strong vacume it's still just refuses to work I even lubricated it
Is there anyway i can get these parts without buying any lego sets?(edit: or can someone list me the part so i can just find em on my sets)
Very cool but i didnt have 6 long halg width liftarns so couldnt build.
Any 5:38 u say u need the long pieces how tall are they?
1x2x5 5 tall
Click bait comments perhaps? The half 1x6 beam is just hitting the throttle piece and pushing it out of place. Built it 2 times from the video and it came out the same both times. ( 7:48 )
is it possible to substitute some pieces?
I'm trying to make one but I don't know how to make the base
how did you get all the parts
When i was a kid
I destroyed by myself some of May legos
Here we are now
me too but i don’t have many axels and pieces like that
to everyone saying that there's is not working i had to lift mine up on bricks like he did to make mine work
It helped me a lot❤ thank you
Can you make the list of pieces in the comments?
mine engine doesn`t rev high only 1000rpm i think and when i don`t push the throttle, engine stops working
Can you put a list with the pieces we need in the description please?
Yes
Thank i needed the help
Does it work without throttle
Hey i hope you will make other vid cause it good
Whats the name and number of the peice that u call: the half crank?
Ok now i want to make a V8
How does the throttle go back like that?