Cracked top panel garage door
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- The aluminum top panel has split which during closing is flexing which causes too much resistance so the opener halts closing. Disengaging the door from the motor and manually closing the door still works.
![Garage Door Fails [Smash Edition]](http://i.ytimg.com/vi/hBMVJ0qswu0/mqdefault.jpg)
This should be fixed soon or the rail could break causing the chains to fall
The remote collection of the remote
That chain is perfect and the opener could be lower but its just that whoever installed the door never put a strut to reinforce the door so that is pretty much what the problem is here.
Your top section needs a reinforcement strut and that should fix the issue for the time being, however eventually you will need to have the section replaced..
How do you shut the door if it does that all the time
Push garage
You need a beam to fix it and it will work fine
Also just saying change your rollers and lubricate
Anyone else at the beginning see the spring move (Not spinning but in made a little bump)
Probably you get a LiftMaster
The door arm has to be longer.
Put a top strut on that thing!
Because I have a LiftMaster
The arm should be longer, and the opener should be lower. The arm should be angled between the 1 and 2 o'clock position and the opener should be mounted 2" above the highest point of travel (when the top section folds up) and the motor height should be set with a 2x4 on the door with the rail resting on it. you'll also need to reinforce the top section. I hope that helps, and good luck.
It needs a strut
You should probably get that garage door to a mechanic
The door looks perfect to me lol
Not installed right
oh my god!
Do you need a new door asap
This looks dangerous
What happened
What’s wrong with your garage
Dam bro