Great video thanks Is it possible to do a pop off test on the bench,with these injectors if so what psi do these pop off at Also as they have a soloniod do these need voltage applied and how much in conjunction with psi to pop off, I have ford fiesta 1.4 tdci 2008, i have a 12v pulse tester that triggers the soloniod and a pop off tester, but pushed to 4000 psi and none will pop off, so eigther not anough psi or not enough of voltage I don`t know, All injectors from a running car but one intermitton,
The bosch does a loaded test the fluke dont you can get good ohm readings on a normal multimeter who dont load the circuit, so if it reads good it might still not be and could fail when correctly load tested. Its why the bosch tester loads it with 100 volt Good videos id like to see more .
Hi, Martin. please tell me, you can order as an original nozzle solenoyd detail. If so, under what order number. Thank you. very valuable to see your experience on repair of diesel fuel injectors. Greetings from Russia.
Thanks for the video, solid idea! With the Bosch tester -- would the values vary any if the solenoid was tested while still on the injector, or should they be about the same? Is testing while they're still on the injector not recommended?
So with the Bosch Meter Martin you are testing just one solenoid in a complete loop or since this is a Piezo are you testing the open and close portions of the Injector?
![เปิด อาณาจักร หมื่นล้าน "สาระตั้ม" l [Nickynachat]](http://i.ytimg.com/vi/3XE0nPF4YkQ/mqdefault.jpg)
Awesome Martin! Never thought about testing Injectors like that. We have a couple meggers we use for hybrid work, will have to try this out.
Awes video bud
How do you confirm which pin is for piezo stack activation so to wire up correctly with breakout leads
Congratulations for this good video.
Would you tell me what are the micro faradios good and bad? thank you very much
Great video thanks
Is it possible to do a pop off test on the bench,with these injectors
if so what psi do these pop off at
Also as they have a soloniod do these need voltage applied and how much in conjunction with psi to pop off,
I have ford fiesta 1.4 tdci 2008, i have a 12v pulse tester that triggers the soloniod and a pop off tester, but pushed to 4000 psi and none will pop off,
so eigther not anough psi or not enough of voltage I don`t know,
All injectors from a running car but one intermitton,
where can i buy the new piezo?
The bosch does a loaded test the fluke dont you can get good ohm readings on a normal multimeter who dont load the circuit, so if it reads good it might still not be and could fail when correctly load tested. Its why the bosch tester loads it with 100 volt
Good videos id like to see more .
Hi, Martin. please tell me, you can order as an original nozzle solenoyd detail. If so, under what order number. Thank you. very valuable to see your experience on repair of diesel fuel injectors. Greetings from Russia.
Can I please ask where did you buy that solenoid part from? Many thanks
Thanks for the video, solid idea!
With the Bosch tester -- would the values vary any if the solenoid was tested while still on the injector, or should they be about the same? Is testing while they're still on the injector not recommended?
good evening. what is the model of this bosch device
what resistance and voltage should be on good working bosch piezo injector?
Hi Martin !! Greetings. Whats the correct piezo solenoid tigger voltage and current for a good Siemens VDO injector of Ford 1.4 tdci ?
Martin, what would the first Megger you used have read across the pins like the Bosch on new & old solenoids ?
+1973Robski I would only use a Megger on an Insulation test, pin to body!!
+martin wainwright hmmmmmm have I got my wires crossed with 'megger' & 'insulation tester' then ?
+1973Robski ahh did you mean @ 250V?
Thanks nice video
hi, where from did you get new vdo solenoid? can you share with supplier please, thanks
we can suuply the new solenoid for VDO : www.hibright.cn
Hi how can I find a new solenoid?
we can suuply the new solenoid for VDO : www.hibright.cn
So with the Bosch Meter Martin you are testing just one solenoid in a complete loop or since this is a Piezo are you testing the open and close portions of the Injector?
Anyone knows were to buy new solonoids?
yes friend can i help you with this
@@movimientourbanomovimiento4243 Do you know were we can purchase VDO injector piezo stack spares? Please let us know.
we can suuply the new solenoid for VDO : www.hibright.cn
170 Kilo Volts, no no Kilo Ohms resistance not volts
Nothing clear about your test....sorry