Teardown of Siku Control 32 John Deere 8345R Motor and Gearbox
ฝัง
- เผยแพร่เมื่อ 13 ก.พ. 2015
- I've mostly used the Siku Control 32 Fendt 930 motors in my models so far. Those motors have a clear plastic case which means you can see what motor you have and that it has a brass gear train. In this video I take apart the motor and gearbox from a Siku Control 32 John Deere 8345R to check what motor we are working with and what material the gear train is made from.
Visit the RC Tractor Guy website, blog, forum and store at:
rctractorguy.com/
Become a Patron to support the RC Tractor Guy:
/ rctractorguy
Like the RC Tractors and Construction Vehicles facebook page:
/ rctractorsandconstruct... - ยานยนต์และพาหนะ
Hey Tractor Guy
is it possible to replace the rear axis and the gears of the JD 8345r by the one of Fendt 930?
Thanks for the answer!
hi! where it is possible to buy such motors new?
at meny CLAAS 850 AXON and on his motor the leading gear wheel has broken. He pratichesk doesn't go.
The best choice is replace more powerful motor and gearbox.I think it's possible.
Where do you buy this
Где такое купить! Скиньте ссылку пожалуйста!
...Thank you very much for your video! ...You obviously know much about these siku control models! ...My son plays so lovely with his Siku models. ...I would like to build a trailer or "feed mixer" for his "Siku Control" Tractor. It should have a conveyor screw installed and a slide. So i need 2 motors and i want to power this motors like other SikuControl trailers with the tractors Power Plug! So it should be possible to use the Original Remote Control to control the trailers motors / functions. ...The trailer is then filled with corn, which then fall out of the trailer when the slider (sideways) will be opend and the auger is on. BUT WHERE CAN I FIND SUITABLE MOTORS and CABLE FOR SIKU CONTROL???
...Please help me! My son would be very lucky! :-) With best regards from Bavaria!
I'm not sure where to get those kind of boards but I have seen people selling parts from Siku trailers on ebay so maybe you would find part of a trailer that you can convert for your purpose. I think only certain trailers work with certain tractors so you might need to look into that.
oba dva motory bych koupil
Allways excellent job from Tractor Guy !! I like the Brass gears,i never have problems with brass gears ,but allways with plastic gears .On Servos is the problem the same .
I just got one of these. Are there any other motor and gearboxes that are better than this. The reason I ask is because I am looking for a bit more torque and a slower speed.
I did a small test last weekend and the metal gear Fendt 930 motor seemed to have slightly more power. This motor spins on the servo saver quite easily. If you had the space you could use two N20 motors back to back like I did in the John Deere 8360 RT build, then you'd have a lot of choice for output speed and torque.
@@RCTractorGuy hi where can i get a motor and gearbox from please