How to fix a slipping Siku Control 32 motor

แชร์
ฝัง
  • เผยแพร่เมื่อ 2 ก.ค. 2020
  • The most common thing I hear on the facebook page is that people have an old Siku Control 32 tractor or bought one second hand which wont pull and empty trailer. In this video I show you how I would try to solve that problem.
    Visit the RC Tractor Guy website, blog, forum and store at:
    rctractorguy.com/
    RC Tractor Guy boards available at:
    www.ebay.ie/usr/therctractorguy
    Become a Patron to support the RC Tractor Guy:
    / rctractorguy
    Like the RC Tractors and Construction Vehicles facebook page:
    / rctractorsandconstruct...
  • ยานยนต์และพาหนะ

ความคิดเห็น • 26

  • @StarionJA
    @StarionJA ปีที่แล้ว +1

    I have 3 siku control 32 tractors in a display case barely ever used, all of them with split clutch gears struggling to move under their own power or pull their implements, all three fixed using this mod 1mm drill and pin. Thanks

  • @alanwilson2813
    @alanwilson2813 3 ปีที่แล้ว

    Nice fix. I have cut brass sleeves in the past to hold the cracked collar on the gear together.

  • @tommysecondspace6977
    @tommysecondspace6977 3 ปีที่แล้ว +3

    I constructed myself a 3D printable repair kit whitch replaces the spring and the broken ring. There is no safty clutch afterwards, but i hdn't had any problems with this solution.
    With the increased spring tension solution you loose a lot of power due to friction against the case.

    • @matakombajn
      @matakombajn 3 ปีที่แล้ว

      Hello, can You share 3D pritable repair kit ? :)

    • @danielezorzini3818
      @danielezorzini3818 2 ปีที่แล้ว +2

      The spring tension ends against the ring that is fixed to the shaft through the pin, so there is no extra friction against the case. If I am not wrong. Btw can you describe your solution? I have a siku with the same problem.

  • @thegamingfarmer8360
    @thegamingfarmer8360 3 ปีที่แล้ว +2

    Amazing, keep up the good work!

  • @jitseslot7861
    @jitseslot7861 3 ปีที่แล้ว

    It worked for me!!! thx so much, I putted second glue on the axle and didn't make a hole but it works now thx so much!!!

  • @Shadow111ze
    @Shadow111ze 3 ปีที่แล้ว +1

    How did you hold the Spring "down" ? Did you had a third Hand or some Tool for it?

  • @MStig43
    @MStig43 3 ปีที่แล้ว

    So I’m thinking about making a 1:16 Case IH Quadtrac RC, and I was wondering with a much heavier tractor, what motor and other components you recommend?

  • @dvoz9023
    @dvoz9023 3 ปีที่แล้ว

    Can you make a video how I can make the front hitch remote controlled and add lights?

  • @davidlorch7979
    @davidlorch7979 ปีที่แล้ว +1

    Ich kann den Tipp nur weiterempfehlen, da der Tipp bei mir auch funktioniert.

  • @williamwilson7857
    @williamwilson7857 3 ปีที่แล้ว

    Do you know why tractor suddenly stops responding and it blinks all lights, it seams it loses bluetooth control. When I turn tractor off and on, it works again. But it's only first day of use and it happened so many times. Also what is use of left joystick ?

    • @RobinNL
      @RobinNL 3 ปีที่แล้ว +1

      Hey, i have the same issue

    • @williamwilson7857
      @williamwilson7857 3 ปีที่แล้ว

      @@RobinNL I read on siku website that they recalled certain models ( this one too ) because of battery malfunction.

    • @RobinNL
      @RobinNL 3 ปีที่แล้ว

      Well, i sent mine to them and they said nothing was wrong (1/5) year ago. I recently tought it may be fun again to drivw a little with the tractor and it was over.

    • @RobinNL
      @RobinNL 3 ปีที่แล้ว

      What kind of tractor do/did you own?

    • @williamwilson7857
      @williamwilson7857 3 ปีที่แล้ว

      @@RobinNL 6796. i will today play with again to see finally