Ron and Randall are the best gunsmiths and part makers I know. I spent a lot of time with Jake J. And Jimmy R. of S&W Performance center as a kid and all you guys are the best and taught me alot. Love ya.
Great video! FYI. I have an assortment of center punchs, to closely fit the hole, to dimple the spot I need to drill. I then use a piece of masking tape and wrap my drill where it is flush. I can then take my caliper and measure up the depth I need and mark the tape. I then remove the tape below the mark. I now can drill down to the exact depth needed safely.
I just received my No 5 Keith base pin from these fine folks and it fixed my problem. The base pin was always jumping out of my Ruger Blackhawk .41 Magnum...nothing seemed to work...this fixed it, I don't even have to use the set screw it works so well.
@@timesup6386 A person who doesn't know the difference between a possessive adjective and contraction probably shouldn't be calling other people idiots. I'm pretty sure this is stuff we all learned somewhere around fifth grade, in case you don't know what I'm talking about here's a little refresher for you. Is that your gun ? vs You're and idiot !
Ron and Randall are the best gunsmiths and part makers I know. I spent a lot of time with Jake J. And Jimmy R. of S&W Performance center as a kid and all you guys are the best and taught me alot. Love ya.
You can tell just by his voice he has all the knowledge of God about these revolvers
Great video! FYI. I have an assortment of center punchs, to closely fit the hole, to dimple the spot I need to drill. I then use a piece of masking tape and wrap my drill where it is flush. I can then take my caliper and measure up the depth I need and mark the tape. I then remove the tape below the mark. I now can drill down to the exact depth needed safely.
I just received my No 5 Keith base pin from these fine folks and it fixed my problem. The base pin was always jumping out of my Ruger Blackhawk .41 Magnum...nothing seemed to work...this fixed it, I don't even have to use the set screw it works so well.
When you drill that out it doesn't mess up your threads
Wasn't the longbase pin a milky longbase drawing pin
How do you know that the bass pins Not Bent slightly.
call 573-372-5684 if you need help ask for Ron
@@GRANDMASTERSGUNS thanks. I'll do that.
Bought my new base pin from belt mountain
Great tutorials and thanks for making these products to keep these guns running right.
Waste of money, buy ammo instead!
IMBICILE
@@Bobshouse No your a idiot
@@timesup6386 A person who doesn't know the difference between a possessive adjective and contraction probably shouldn't be calling other people idiots. I'm pretty sure this is stuff we all learned somewhere around fifth grade,
in case you don't know what I'm talking about here's a little refresher for you.
Is that your gun ?
vs
You're and idiot !
@@dannelson8556 Your a idiot too LOL Fucking Idiot you best them all.
@@timesup6386 Hey, we agree on something!