Testing Lego Technic propellers! Will they fly?
ฝัง
- เผยแพร่เมื่อ 17 ธ.ค. 2023
- DON'T TRY THIS AT HOME!😅
*No minifigure was hurt during the filming of this video!
I hope you enjoyed the video!
Let me know in the comments if you think it could become airborne!
Here are the electronics: www.amazon.de/-/en/Rechargeab...
#lego #legotechnic #asmr #engeenering #fly #lucasdynamics
LEGO® is a trademark of the LEGO Group, which does not sponsor, authorize or endorse this video or the content herein. - วิทยาศาสตร์และเทคโนโลยี
Do you think an aeroplane would fly with these?
Great video! It was really neat to see your lift comparison. I think you should look into a buwizz 3.0. They are lighter and produce more power than the mould king. They are a bit pricey but I love mine! I think a plane or helicopter design has potential with the proper setup!
In Theorie yes
@@madeforappinstalls Yeah, I already built a glider with paper wings, it's a little bit cheat, but a big baseplate is quite heavy...
@@jareddeckard2703 I will try to get one! It's also a little bit cheat, but it might be the only way to get it airborne...
Try use coaxial proppeler
He wasn't even waring a helmet 🥲
I know 😅
Bro💀
@@lego-constructions XD
Rip Lego Minifigure💀💀
😔
Try using a technic turntable to mount the rotor blades if you try to make anything airborne. You'd probably increase the stability of the blades as well as incorporate means to control the blades, leading to the basis of a functional flying craft
You mean I should install a turntable under the whole thing to achieve a better stability?
Yeah
Yes
@@LucasDynamics you can do that or you can find a way to attach the rotors directly to the turntable, using some gears to get power to the whole thing. May be tricky with the geometry of the turntables but the stability you'd get is probably crucial to actually getting an entire structure to fly
@@neetard7360 The Lego turntables have a fair bit of friction though.
0:45 1:05 1:27 1:30 1:53 2:19 and the rest almost broke the sound barrier
*No minifigures were harmed in the making of this video*
Exactly🥲
Any progress in creating a flying lego machine yet? Are you trying to build a plane or a drone and what are the engineering challenges you need to solve in order to get this airborne? Definitely looking forward to the next video regarding this topic!
It's quite difficult...
Building a drone would be only possible using non original battery's or something like a Buwizz I think... I am currently trying to build a plane...
@@LucasDynamics Drones also require a flight controller with a gyro and accelerometer to be stable, another thing that would need tuning. Not impossible, just difficult.
Awesome video! Nice work on the editing!
Thank you! Nice to hear from such a Lego legend!
hey what battery hub and controller did you use in this vid
Warning ⚠️ is this might be 10,000 speed
1:53 whoa! It’s a fan
i wish you tried a counter-rotating propellers setup too. good video regardless
How would that work???
That would be extremely difficult with Lego...😅
Very cool video my friend ❤️, hope this will get millions of views 😍
Thanks, we'll see if the algorithm picks it up...
@@LucasDynamics I hope so ❤️, don't forget me when you become a TH-cam star 😂✌️
@@Bricks.Master.Builders😂 When I become a TH-cam star?😅
You have still like 34 times more subs than I...
You will become a play button soon 🎉🥳
2 Weeks later . Almost 50k views 😍
Congratulations 🎊🎉
Yeah, thank you!
Any suggestions how I can improve my videos, thumbnails and titles? 😏
@@LucasDynamics I think you achieved what i couldn't achieve 😂 I'm the one who needs advice 😁
@@LucasDynamics I think you are good and it's working for TH-cam algorithm. So stick with this format. Maybe I can share your videos and you share mine on our channels to reach a wider audience.
Ok, maybe in the long form videos, but your shorts are getting a lot of attention...
@@LucasDynamics yes 👍🏻
just a suggestion to use stiffer structure for holding the axle. i guess you get some significant friction on the link above the gears, and also resonance due to the long free standing axle.
Yeah it's quite problematic...
I love the "buhbuhbuhbuh" sound heli blades make
Ohh did you not wear a helmet safety first
Try 5-bladed propeller/rotor like big helicopters use. It should be slightly quieter as well.
Nice! Well done!
Thank you!
I like the two blade one!
Yeah, it's cool👍
More old-school...
Cool video!
This was truly dangerous!
Yeah it was!
Don't try this at home!
I’m going to try it at home now😊
@@Nothinghere47538 Cool!😮💨
5:53 That propeller flies.
Great experiments, I'm curious about the topic of the next experiment
Thanks, I am wondering how do you record your audio in your videos so clear... Is it the original sound recorded with a good microphone, or do you use stock audios?
I think combining both will make the video even better@@LucasDynamics
@@woaminibricks Ok👌, thanks!
Nice video keep going!
Thanks man!
Nice video !!
Thanks mate!
Markrober when he trys Lego:
😎
It's very cool!
Thanks man!
I suggest you build a Lego airplane and try to make it fly with those propellers 😊
@LucasDynamiics 😊
Create a smaller tecnic shaft for the propeller mount to lower center of gravity with less vibration. It saves lots of energy
next test would be the pitch and prop design...or even consider the Toroidal Propeller.... just a thought,.. I build and fly quads.. latest was a 5" hyperlite called the Tooth Fairy.. does around 112mph and in FPV is a blast..!!
try adding 4 of those propellors and having 4 arms to hold the propellers like a drone
You mean with four motors, or a central one?
@@LucasDynamics i ment 4 motors but you could try 1. Maybe do both for a video? I'd watch it
@@Sparkfilm-yy8ye I have something similar planned...
@@LucasDynamics yay
@@drafffic Yeah, I will try both...
R.I.P🥲
I am so sorry 🥲
Noooo whyyy?😢
He had to test it...
@@LucasDynamicsYou could have tested it!
🤔how?
Rip Joe, one of the best Joe 😢
Hi Im your New Subscriber
remember me as the guy who was here when u had 53.9k subz
If you make it float and add a rudder, you'll have one super fast Lego hovercraft!
Sounds like a jet!
The propellors need to be in proportion to the body, especially in length.
i love lego
I think too fast speed resulted to stall at the end of blade, 2 main parameters effect to lift force are rpm and angle of attack. Anyway, love your experiment.
0:43 bro hit a high note💀💀🤯🤯🤯🙏🙏🙏
I have a question? What are the purposes of gear ratio?
Short Answer: It lets you spin the propeller faster
Longer Answer:
Much harder to show without a physical or even visual representation, but imagine two gears connected to each other, one with eight teeth and one with four teeth. Every time the gear with eight teeth is spun around 1/8 of a complete turn, the next tooth makes contact with the 4 tooth gear, and pushes it forward, moving it to the next tooth. Eventually, once the 8 tooth gear has turned 1/2 of a complete turn, the 4 tooth gear will be back to its first tooth. Every time you rotate the 8 tooth gear all the way around once, the 4 tooth gear rotates all the way around twice. With different numbers of teeth, the gears will turn at different speeds. A gear ratio refers to the ratio of teeth between the gears, in this example, the ratio is 1:2, two teeth on the eight tooth gear for every one tooth on the four tooth gear, meaning the four tooth gear will spin twice as fast as the eight tooth gear. So instead of connecting the motor directly to the propellers, you can connect the motor to a large gear, have it spin a smaller gear, then have that smaller gear spin the propellers much faster.
I mean, take a look at the ATR 71 or the Q400-8
Let me just go make a helicopter brb
😏
3:45 screw you! I WANT FREEDOM!!! *flies*
Lego constant-speed prop possible?
Aeroplane next, please!
I will try it!
But it's going to be difficult!
A drone motor maybe?@@LucasDynamics
@@picknikbasket Nah, it needs more torque...
@@LucasDynamics yeah true, good luck with it, I'm not sure Lego motors will be up to it but you're on to something. Keep trying!
@@picknikbasket I will!
bro is the GOD of lego
Violating the legos at the end bro 💀
ive always tried to build somthing that flies from lego. I have spare propellers from my drone and have tried a couple times to use those but the lego motors just dont spin fast enough
Yeah, you need a buggy motor, they are way more powerful then all the others...
@@LucasDynamics Yeah i was using a buggy motor with buwizz at ludicrous + gear ratio
Ok than you need a gear ratio and some better blades...
The originals are very good and efficient, but are quite expensive.
@@LucasDynamics blades arent the issue, they are proper drone blades that work on my actual drone
What it the another battery box for?
Just to add weight...
I was concerned that it might take off...
You need to check rpm when you add ratio gear
POV me: mom can we buy a rc helicopter? Mom: we have on at home. The helicopter at home:
Bro wants to fly an aeroplane with this 😂
@LucasDynamiccs omg
BRUH WAS BEATING MEAT
Can you please write another link for the propellers
You can't buy them new, you have to buy them used...
ok and where@@LucasDynamics
Drat now I need to buy 3 propellers!
Sorry, they are kind of expensive...
Where do you buy that controler for lego
He bulit it
Do a 12 blade design no ratio
Wow how can you bend your thumbs like that?
Now make an airplane.
Make a Lego helicopter or drone
5:39 he thought he was slick
Iteration 999999:
- Earth and moon too lose
yes it flew
Weird fact: This is a Chinese buggy motor, cuz it has PF connector built-in, and original buggy motor has 2X2 stud 9v connection, perfect for NXT/EV3/BWizz X.0
Yeah, it's a mould king buggy motor with the power functions connector...
Btw try this with even faster BWizz motor
@@Nintendo3D5 I will definitely try it!
Wieviel Zeit war in dem Video
Vorbereitung: 2-3 Stunden
Filmen: 3-4
Schneiden: 3-4 Stunden
= ungefähr 10 Stunden
@@LucasDynamics Krass 👍
Bei dem nächsten bin ich jetzt schon bei 20 und es ist immer noch nicht fertig...
make a rc helicopter pls *made with lego *you can use technic lego**
Bro the 5 time tring to make it good the ploperrer fling of
What camera and video editor did you make all your videos?
It depends, sometimes I use a Canon and sometimes my phone...
I am editing with DaVinci Resolve or mobile with CapCut...
Have you answered the question of the caption in the first second?
Yeah, basically...
5:54
bro it like nasa rocket fly away
me playing beyblades be like
При повышающем передаточном числе 1 к 3, судя по звуку, мотору тупо не хватает мощности, он не раскручивается до своих рабочих/максимальных оборотов.
You are very smart
Wow good
Thanks!
Me from Indonesia
You
5:40 ayooo
5:40 so sus💀💀💀
💀💀😂
5:40 ayyoooo
💀
5:41.
Thats what she said.
5:39 lewd
The air from the propellers is also getting pushed down on the scale, so it is actualy lifting more than the scale says
No, this makes no difference...
Warning: Lego Buggy Motors Are Dangerously Fast!
Yeah, I know 😅
Try to use more buggy motors
Nah, I am trying to get it flying...
That would be way to heavy...
5:41 looks sus.
sonic speed up sound effects 6:40
Yeah, the sound is crazy!
hahah this is some real shit !
I wonder what happend to the minifigure...
*No minifigure was hurt during the filming of this video!
We'll see in the next video if he survived...
@@LucasDynamics I wonder....
@@brickaversion I also hope he does!
@@LucasDynamics Mysterious...
8000 RPM
TORN4ADO
Make helicopter
The 6-blade one does win. It lifts 7 grams more, but the 0 grams is measured with the added weight of the propeller. So the number you thought you wanted to measure actually says this propeller can lift 22 grams more, but weighs 15 more.
Nah, I don't know what you exactly mean bro, but it isn't right...
It's very simple, by using the scale I ONLY measure the weight it could lift... But if I want to implement it into a drone, the weight of the propeller also counts because it isn't on the scale anymore...
please teach me
Noo not ron weasleyyyy
Harry will safe him for sure!
any talk about 5:40
5:40 💀💀💀
💀💀💀
это выглядит вертолётом...
zajebiste
저러다 빠저서 손 다칠것 같은데
😂😂😂😂😂😂😂😂😂😂 parece un avión
Si😅
When you add new pieces, you can not get accurate results between the first and second prototypes because the change in weight affecting the overall limit.
this bro have a 600 iq lol
@LucasDynamiccs thank you bro 💜💜
welcome to china airlines