Cressi Leonardo dive computer - A normal dive

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024
  • Cressi Leonardo dive computer - A normal dive

ความคิดเห็น • 12

  • @davidbalut4149
    @davidbalut4149 8 ปีที่แล้ว

    Great Video I love how it explained everything unlike other reviews

  • @igorfraderj
    @igorfraderj 5 ปีที่แล้ว +1

    How do I turn on the backlight?

  • @thomasorrell6535
    @thomasorrell6535 4 ปีที่แล้ว +1

    I have one of these but mine just doesn’t have the ‘Plan’ function at all.... am I the only one? I’m really confused by it and have always been irritated at not being able to use it to calculate theoretical nitrogen and SIs.

    • @oshaq4412
      @oshaq4412 3 ปีที่แล้ว

      You aren't the only one, Thomas. So the issue is that it's in 'Gage' mode. If you take it out of this mode: you will have access to the planning screen.

  • @Kai_Craig
    @Kai_Craig 4 ปีที่แล้ว

    Can you change it from ft to m?

  • @BCBOYS92
    @BCBOYS92 7 ปีที่แล้ว

    It looks like theres a safety stop timer... Am I wrong?

  • @DjNightRunner1111
    @DjNightRunner1111 8 ปีที่แล้ว +1

    ("Ok enough talking time to get wet!") Seriously is nobody gonna call phrasing on this!

    • @seikibrian8641
      @seikibrian8641 8 ปีที่แล้ว +1

      There's nothing wrong with it; just insert punctuation based on his speaking rhythm. Then it would read "Okay, enough talking. Time to get wet." The latter would be assumed to mean "[It's] time to get wet."

  • @MisterBenne
    @MisterBenne 6 ปีที่แล้ว

    Too complicated. Too much info which is no Need for usual dive. Depth, (Maybe max Depth) air pressure (rest time), deco, is all ya need

  • @labviewwitholeg2953
    @labviewwitholeg2953 8 ปีที่แล้ว

    It is a strange computer. After a year and just a few dives it stop working as should. To set an oxygen level you suppose to press and hold the button but computer shuts down... Wasted money...

    • @seikibrian8641
      @seikibrian8641 8 ปีที่แล้ว

      Have you replaced the battery? You may already know this, but just in case (and for any readers who don't know), even when the display is off the computer is using electricity. Regardless of the number of dives, you should put in a new cell yearly, or earlier if the "Low Battery" indicator comes on.

    • @seikibrian8641
      @seikibrian8641 8 ปีที่แล้ว

      To refresh my memory I just pulled mine out and set the PO2 and FO2. Here are the steps I used:
      1) Short press to turn it on.
      2) Short presses to cycle through to "DIVE-S" (dive settings) mode.
      3) Press and hold to activate dive settings mode.
      4) Short presses to cycle through PO2, FO2, Deep Stop, Safety Factor, or Altitude setting.
      5) Once on desired setting, Press and hold to select.
      6) Short presses to cycle through options. (P02 of 1.4 [factory default], 1.5, 1.6, 1.2, 1.3; FO2 of Air, or Nitrox 22% to 50%; etc.)
      7) Press and hold to register setting.
      8) Wait for computer to return to DIVE-S top menu.
      9) Short presses to return to Normal mode.
      10) Wait for computer to turn off, or start your dive.