Buenisimo video colega 🖒...pregunta yo batallo para conseguir un buen filtro como consigo el filtro que usas, lo puedo comprar por internet oh alguna recomendacion...bendiciones ✌
Dirty drop is first done with lots of excess nitric acid. Run out of nitric before base metals are gone, the precious metals will begin to cement out and remain above first filter. Notice the denox produces lots of bubbles. The next drop can be much less nitric. Like a few mililiters to 100 mililiters of hcl. This will not need to denox since the nitric will be nearly used up. Hope that helps!
@@AllHopeIsLost1134 sreetips shows some good examples. Also not rinsing powder of nitric enough before adding hcl for a boil and watching it go into solution has been a good lesson haha
That process only uses the Aqua Regia acid system 3 times, bro, so you don't use a system just HNO³ chemistry at the beginning. Which process is better like in your video, compared to just the HNO³ process when starting the process bro🙏🙏 please answer and explain bro🙏🙏
Is acid free in your country? You use the most brute force methods that are very wasteful... You could dissolve all base metals in HCl only - takes some time and some oxygen from the air - and then pyrolyse down the remainder and dissolve the precious metals in a cup of aqua regia.
@@TrinityGoldRecovery Great, I have some Gold recovery scraps of Mobile phones and computer boards, share your Mail ID I will send you details. I am from India
عمل ممتاز اخي .كم يساوي سعر الفرن الكهرباءي لصهر المعادن!؟ وشكرا.
بسیار عالي عالي
Хорошое видео и прекрасная музыка. Я люблю такие вещи.👍
Nice chunk of gold that more than I woulda guessed was in them pins.✨
Om sai ram appa..Jai sai ram appa..Nanri sai appa..🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏
Very Very good 👍
Do you use regular water from your house or house seems like it would be costly if all the water you use was distilled
Buenisimo video colega 🖒...pregunta yo batallo para conseguir un buen filtro como consigo el filtro que usas, lo puedo comprar por internet oh alguna recomendacion...bendiciones ✌
Number one
✌️✌️
NICE VIDEO BRO NICE RESULT.
Thanks bro 😇💚
Que pasada. Saludos chicos. Trini maestro 😊
Nice looking little bead there bro 👍👍🙂
Very good job!
Thank you!
Has anyone seen cell phone pins in that pile of gold-plated material?! 😃😁
wow, amazing as always
✌️✌️
Great work
✌️✌️
Incremental doses of nitric will keep you from using too much and save you the trouble of having to neutralize the solution before adding the SMB.
สุดยอดครับ
with us it is difficult to obtain SMB
can I replace the smd with iron sulphate like in this video In the first and second refine
Do you use torch with gas portabel ?
Hi Trinity🤟,Why do you mix Hci and Hno(Aquaregia)? Doesn't this MixGold contain other metals
Yes I was also wondering that too
👍 👍
잘보고 배우고 있어요
감사합니다
다음에 LED 금회수 영상을 볼수 있을까요 ?
Well done 🌟 👍
✌️✌️
Nice Video sir👍💝
✌️
👍👍👍
is very good video bro .thanks 🔥🔥🔥🔥🔥🔥🌹
✌️✌️
@@TrinityGoldRecovery 🌹🌹
0,365%. Thx for work. Be happy.
Nice button 👍
✌️
Hi can I use 60% nitric acid for refining
superb result! what is your method of ratio for acids hcl ect, because you put 3 ltr hcl and 1 ltr NO3?
Dirty drop is first done with lots of excess nitric acid. Run out of nitric before base metals are gone, the precious metals will begin to cement out and remain above first filter.
Notice the denox produces lots of bubbles.
The next drop can be much less nitric. Like a few mililiters to 100 mililiters of hcl. This will not need to denox since the nitric will be nearly used up.
Hope that helps!
@@colonialcharlie8702 Sreetips?
@@AllHopeIsLost1134 sreetips shows some good examples. Also not rinsing powder of nitric enough before adding hcl for a boil and watching it go into solution has been a good lesson haha
5.5 gr ❤❤❤ thats a very good amount to recover !!! Thats the amount i want to recover but not succeed yet usually 0.5 at the bests hahaha !!!
✌️✌️
👍💪
Отлично👍
That process only uses the Aqua Regia acid system 3 times, bro, so you don't use a system just HNO³ chemistry at the beginning. Which process is better like in your video, compared to just the HNO³ process when starting the process bro🙏🙏 please answer and explain bro🙏🙏
❤️❤️
Pulok...Thanks
Will not copper and other metals dissolve after aqua regia?
Along with gold, other base metals including copper are dissolved. Nothing remains.
Thanks for answer. If other base metals is dissolved, will they not drop out together with the gold?@@TrinityGoldRecovery
Is acid free in your country? You use the most brute force methods that are very wasteful...
You could dissolve all base metals in HCl only - takes some time and some oxygen from the air - and then pyrolyse down the remainder and dissolve the precious metals in a cup of aqua regia.
Hola podrías hacerlo sim
Hello, could you do it?
Good result bro
✌️✌️
Hi Trinity, thanks for the videos. What water do you use? Ordinary, rain or demineralized water?
Rain,tap water
Selamun aleyküm. What is the degree or volume of the acids you have used?
HCL -34%
Nitric-68%
Sulphuric -98%
👏👏👍
✌️✌️
Have you tried working on rocks?
Si
😀👏👏👏👏
ok
😮
What kind of filtering fiber you used bro?
Synthetic fibre
Couldn't you have used salt to knock out any silver or copper, filtered and had a cleaner gold solution.
Excellent result 🙂👌
✌️✌️
so you using aqua regia 2x in first step and two step
Yes
OMG
That music !!!!!
One minute is putting me to sleep the next minute is making me angry as hell
he actually got more than a gram or 2
How Much it cost you for 1.5 Kg Mixed Cell Phone Pins ?
250 Dollars
@@TrinityGoldRecovery You bought it from eBay or somewhere else buddy ?
Scrap sellers
@@TrinityGoldRecovery Great, I have some Gold recovery scraps of Mobile phones and computer boards, share your Mail ID I will send you details. I am from India
👏👏👍