Transistors Gold Recovery | Recover Gold From Transistors | Gold Recovery
ฝัง
- เผยแพร่เมื่อ 16 พ.ค. 2022
- Hello Viewers,
In this video, we are showing you how to recover gold from electronic transistors. It's a 3 days process we are showing you in a single video.
#ewaste #ewasterecycling #goldrecovery #gold #goldmelting #palladium - วิทยาศาสตร์และเทคโนโลยี
Mantap terus berkarya, guna pengetahuan dan ekonomi jangan lupa alat kesehatan penting.
Just the advice boys. I’m a jeweller. And almost everyone making the same mistake. When you melting gold dust or fine gold ; do not put fire directly onto the pot. Mix it 50%gold 25%borax 25% sodium carbonate. Raise the pot with pieces of stone or tile and leave underneath elevated. Hold the flame from the sides and under until it becomes red and gold sticks to the powder. Then heat it. When melted , hold the pot and try to spin the gold and catch all the gold inside the melted borax. Good luck.
Is there much added benefit? Or is that just "the way it's always been done?" Perhaps a cleaner look?
Most small ewaste refiners use much less borax and don't set up like a charge for fire assays.
Small amounts of sodium carbonate sprinkled before heat glues the powder into a nice compact clump with a just a little heat to sides. Then tiny bit of borax to lift after its beaded.
Keeps cleaner crucibles for alot of small batches.
@@colonialcharlie8702 you are correct my friend. What I was trying to do is ; after so much work and cost , most people loose their fine gold in the melting process. Pressured gas flames force the gold out that you can’t see it with the naked eye. This is one of the method , I was trying to save small scale investors.
Ah yes, haha I have my "lesson crucible" with red spots all over it, where my first test burns' fines powder ended up. Luckily it blasted into a homeade chamber, and i could recover the majority from a peice of ceramic wool it got sprinkled into.
(Chunk of the filter paper gave way and then let pressure blast through the powder)
Now some sodium carbonate goes a long way.
Thanks for advice
Learned that one the hard way when i first learned refining... Melting my very first button... Bout 4grams in the dish. Hot it with the oxy torch flame and poof, empty dish... Managed to wipe up and recover 1.8grams out of right under 4.1g... Ouch
@@idontknowmyfirstname69 lucky that, you’ve done it in a place that you could recover some of that. 4 grams worth of scrap is lot of hard work
배울게많은 학습 영상 감사합니다 ^^
Been waiting for this one. There might still be gold brazing on the coppers. You need to add some borax to the melt dish to help settle the gold beads in to one button.
Fantastic job, I waiting long to see it here…I collected many of this kinds transistors, some of them are so tiny and others are really big and heavy..but I didn’t know it have silver coating on the copper.. by the way during the burning time, after the plastic are gone, due to the presentation of copper, the flame turns to the so beautiful green color..I did it at night and because of the darkness the effects of flame was amazingly pretty..
thank you very much..
Fascinating video, love to see gold being recovered from old electronic components. I have worked in the electronics industry for many years and have hoarded many boxes of old circuit boards and discreet components. Some of the earlier boards have gold plated circuit tracks all over and ceramic chips with gold plated pins and covers, normally the high end Hewlett Packard medical electronic tech. Some day I hope I can give this stuff to someone who would be interested in recovering the gold, love to know how much could be recovered.
Hey man I'd love to recover the gold for you by a similar process as this, if you're interested, msg me and we'll work something out!
I believe you, my life passion is unlocking the riches in old components and without forward thinking g.o.a.t.s. all of that gold would have been lost. I would love to process your material and share it on TH-cam, if you would be willing we could work out the details. Hope to hear from you soon.
Me too! But I'm just a self taught garage refiner
Here here for the self taught garage refiners out there!!
Love the channel. I think they could dial back on the nitric a little and save some money, or keep adding gold bearing material until the reaction stops to maximize the return on chemicals.
Great work. Thanks
Thank you for your hard work.
Yeah, it’s better as a hobby!
✌️PT
Perfeito,top.
Best simple easy very nice video
Thanks for liking
almost never missed to watch every episode on your channel..give me inspiration,many things i learned..keep upload new series..
✌️✌️🥰
I collected 1000 transistors for gold recovery and before pouring sulfuric acid on them to dissolve the plastic I decided to open transistors. I was shocked!!! 😧 Out of 1000 transistors, I found only 17 gold-plated transistors. Different types of transistors and they were all copper with a little bit of silver. 🤔
How did you open them????
@@toomuchdebt5669 You will find the answer in my last video. I showed how especially for you 😉👌
and how much gold you got ??
Try high frequency power transistors or transistors used in radio, TV and satellite transceivers.
Boa noite Trinity, depois da extração do ouro, solução azul que ficou contém outros metais a ser extraído prata, cobre e alguns outros se houver, isso?
NICE 👍🏾
Very good result for such material! 🌟 👍
✌️✌️
Fantastic
안녕하세요 😄
트랜지스터 1.5kg 토치로태우고 분쇄하고 걸러서
물 400ml
염산 900ml
질산 300ml 모두 넣은후
30분후에 필터 작업후 똑같이 따라했는데
0.07g 금이 조금석인 은이 나왔어요... 뭐가 잘못됀건지 알려주세요 ??ㅎㅎ
Mantap 👍
I try transistors ... Very good in copper recovery !!! Nice vid ❤
Nitric acid only in the beginning to remove copper and silver rinse well and then aqua Regia for gold.
More effective and less contamination of the gold
I've been waiting for so long , for this Vidio 🙏
✌️✌️
Thanks for this video. I've been hoarding my transistors for years now.
That was more gold than I was expecting, I was guessing about .2 to .3g yield.
✌️✌️
Try selling them as is first !
Might be shocked when you make 10x more than you would have from breaking them
@@matthewcooke4477 I'm hoarding all gold & silver bearing components because I'm going to do the gold recovery & refining myself. I'm not really caring if I loose money on somethings because this is a hobby and I'm doing all this for fun.
""That was more gold than I was expecting"" MORE????? 0.55 FROM 1.5KG ?
Looks like you need to glaze your melt dish with some Borax before using it. This will help with the gold collecting together.
Thank you.
this is the best 👍👍👍
✌️✌️
So a 55 gallon barrel of transistors, is worth the time to process?
Nice day nice video
I once made a video on how to recover PMs without chemicals ( at least in the first stages before final refining) I think the right usage and the availability of so many different chemicals can be difficult in some countries. Still, nice work!
من فضلك
كيف يكون في بعض الفيديوهات راسب الذهب بني وبعضها راسب الذهب اسود. وبعضها راسب الذهب احمر
هل الماده المرسبه هي السبب؟
Bonito video as canviao de copelas trini las artesanales le hivan vien concentra mas el oro en el centro de la copela ami parecer un saludo desde españa😜
Very good result, is there any high grade Low grade transistor, Tv board transister wil come like this result.
Good
Wow
Thank you
hello master i have a question for you BGA (Chipset) or graphics cards that are on the computer board or in the graphics cards we can get the gold from those chips
Yes, you can get gold from those card, you can find same video on my channel..
This is a good result, I didn't expect anything like this. I was buying a kg of it for 5 dollars. There is about 15 kg, I didn't even process it because there is nothing, but there is, this is the definitive result. Are you sure?
really good job, your channel and work is awesome. just a couple of questions, what do you do with the waste solution, do you just neutralise it and then get rid of it? or do you get the copper and other metals out of it and neutralise it then? and why you always use tap water?
We just neutralize the solution.
And the tap water is available for me
When rinsing and pouring water out of a container of precious metals, always use a fine filter to catch any precious metals that try to escape with the water.
What kind of nitric acid is used to gold recovery and silver recovery
At about time 330 would a gold pan be useful?
Tuyệt vời quá
Thank lot of u
After grinding the transistores and washing them
I know thats they give legs in what is going yo proceso with the aqua regia.?
Thanks for You attention.
I’m glad you found a job but is that good for the environment ?🐎🌻✌️
good job
✌️✌️
😮👍👍
Do you provide training and how can I reach you please help
Damn never would have thought
👍👍👍
How much silver in 1.5kg transistors?
Please make a video to extract silver from transistors.
With lots of love💞
🥰🥰
خوب
Resistore capsule se gold nikal kar batao
Recuest Bos😊..until paladium proses to finish😊 please bos...thanks..
Hi everyone. when lowering gold from aqua regia with SMB, it is lowered with gold and lead/tin. (gray white precipitate) how to get rid of it? help please
VERY NICE VIDEO
✌️✌️
How much silver was recovered?
First
Hi I have a neutralized smb solution I added some that the gold precipitated but when I check the solution with sncl2 it shows that there is still gold to save them?🙂
After 24 Hours?
@@TrinityGoldRecovery Yes, he left, but little gold has precipitated and liqvid shows that there is still some gold there and I don't know what I'm a beginner and I don't see if it can still be precipitated.
@@lukasvykopal did you denoxed it enough?
من اين حصلت على 0.55 ؟؟
Dear! I don't have a reaction of getting sediment by adding sodium metabisulfite, the gilded components dissolved in AR what's the problem?
Did you denix it enough?
I've tried more urea now, I think something is happening, my solution is cloudy and it's a little reddish. Tomorrow I'll see if there's any gold deposits
is that true 0.55g gold recovered from 1.5kg transistor? it's a kind of hardly believe for me, I predict only 0.2g at most.
Хорошее видео но не выгодно.Реагенты больше потрачены и время
يعنى انتا بتفكر ازاى لما تحسب الغاز اللى حرقت بية والاحماض والوقت وبعدين اخد نص جرام من الذهب يبقى ولاليها ملة ام لاذمه انت انسان محترم لانك بتقول الحقيقة احسن من ناس كدابين باعو الوهم للغلابة مثلى واتفاچأ بكيلو بورد المحمول 350 جنية وبعد الشغل ومشقة البحث على الاحماض الجيدة التى يصل سعر اللتر 8دولار والنصف للباقى والناتيجة 0,7 جرام مغطوش ثمن المنصرف فماذا اقول على كل حال شكرا ليك
I have 10k mosfets and transistors , how much gold can be extracted from this
🙏👍👍👍
All this type transistor has gold .????
Or only old electronics transistor has gold ?????
After 10 minutes watching this, I said I’ll buy gold from the shop
Все любители золотодобычики ходят в таких тапках.На этом не разбогатешь
Não era melhor ter passado na bateia o transistor moído?
Hummmm até que seria uma boa ideia...
Good PROUSES .
✌️✌️
Bro I Have a Doubt Transistor We can recovery gold? Seriously 😮
Plz.. Ans me..
The white coating is nickel or tin usually not silver
true, I did a test already, it's nickel and tin

@@dirceudepin7755 yes. Very very rare they use silver. I never really test but I've seen the odd few people say they seen silver
this times are good to experiment recovering nickel, price going up but hard to find
@@LuisRodriguez-xf9lv not worth it and super hard due to it being more reactive than hydrogen
@@keytefirerefining1355 that is right. what i am doing is saving nickels ecery time i go ti de bank ask for 20 dollars in nicuel. is a copper mix but 25% niquel . some day us cancellsome coins like canada already did and be profitable to sell for content. nothing to loos. if nothing happer iget my money back and the bank ger a very very heavy box of nickeld. i also have more tnan a thausend pound of copper penies. copper is poormand gold jaja
Слишком большой расход кислот, можно было обойтись меньшим количеством
Can you help us on our new projects sir?
Ini dimana pak
Judging by all the acid you used, along with the other consumables, I'd say you were very lucky if you broke even.
Still cool though
C é louco só a emissão de furano e dioxina não vale o custo da saúde .
En español
Eso blanco qué es?
Great job you're close but you're missing a few small elements to make your refining more accurate more fast and easier Your missing suction during filtering And a hot plate with a beaker We'll drop gold in 20 minutes instead of overnight
lol u do know these guys are in a 3rd world country, I doubt they care about vacuum filtering or any lab type of equipment, his shoes should speak for themselves
приветствую вас не знал что в масфетах есть золото я с них забирал только медный радиатор
Откуда ему там взяться то😂
Hayang di ajar eunglah
Please vaiya urea kaha milega botado
You added some extra gold 😅
ada di mana ya di lokasi mana ya
Wow interesting who even thinks of doing that
Класс жаль я не знаю английский
The process made smoke,, what about enviroment concern
They really don't care in 3rd world countries because getting money for food, clothing, shelter is of primary concern and restocking chemicals. Not much policing going on. What about burning the dead bodies for a funeral? Don't you think the wood burning and burning bodies are an environmental concern yet the practice still continues today because land is scarce and more needed for agriculture and housing and industry and not cemeteries.
The "silver" coating on the copper heat spreaders is not silver.
Tin
Can you add Turkish subtitle option, greetings.
Add a few drops of dish soap to the water, will make the ash stop floating and will settle out quicker...
Good information
I have some old mobiles can u extract gold for me
Почему вы не доживает пыль до бела? Ведь уголь абсорбирует золото на себя.
Silver ?
I didn't look like you glazed the dish first before melting gold
Con las ganancias te compras otras cotizas...
where is the silver in the transistors? can you share the video of it?
Watch our another videos from silver recovery playlists
Siempre pierdes oro en ese algodón,más te vale guardarlos y extraer de ellos jajajaja
hi !are you from India ?
Bangladesh