1/14 RC Hydraulic Excavator 360L RC4WD adding Beier USM-RC-2 Sound System
ฝัง
- เผยแพร่เมื่อ 14 ม.ค. 2021
- We add sound to the amazing Earthdigger Excavator from RC4WD! This heavy duty machine is designed to really dig. In this video I will add the Beier USM-RC-2 sound system.
My email: jacobsenra@hotmail.com
My Website: hobbyconcepts.net/
My Facebook Page: / hobbyconcepts-20961911...
Beier USM-RC-2 sound module; hobbyconcepts.net/products/be...
RC4WD Excavator: store.rc4wd.com/114-Scale-RTR...
Tamiya Driver Figure: hobbyconcepts.net/products/1-...
Facebook group - Tamiya Truck Open Studio: / 648718772583781 - แนวปฏิบัติและการใช้ชีวิต
Thank you for taking the time to make a video and share your knowledge very much appreciated. cheers Jeff
Thanks Bob. I always appreciate the work and detailed information you provide. Especially when it comes down to programming. One of my weaker areas.
Sound came through great in the video.
Enjoy your videos Bob. You’ve got great skills and explain everything really well.
Well done Bob, I always enjoy all of your videos and the detail you put into it making it simple for everyone to understand, I am not much of a Tamiya fan or 1/14 scale but I do watch all of them and find them to be very enjoyable! I am more of a 1/10 scale guy but lately I have entered the world of 1/14 Hydraulic equipment, I have the DRX2 dozer, LESU carter 374 excavator and the LESU roll on/off dump truck. The detail that they put into them is amazing !!! Keep up with all the awesome videos because I am a fan!
Job well done Bob.
you are too good, if only you would also put the translation into Italian it would be very nice so that we Italians could learn a little from you. Congrats on the videos you make👍😎😉🤝🤝
That is a BEAST of an Excavator!! 😲
I'm so very impressed with the Beier Module. Of course you could barely get into its features on this... One Channel Lights and Simple Sounds.
However, after reading the Manual, it's so cool how many things this can do - and I keep the precise Motor and Brake control of my Hobbywing WP1080 ESC!!!
Now I'm anxious for you to do a complete Setup Video on this - on a Rig. Hopefully I'll be at the point in my Grand Hauler build where I'm really to start the Wiring SPAGHETTI!!! 😜 Just in time for a Tutorial Video. 😉
Nice work Bob, I love your videos as they are always so helpful. God bless and keep em coming.
Very nice Bob. Can't wait to get one done in the future by you
Looks and sounds great. 👍🏻👍🏻🇨🇦
I do enjoy these how to videos with the sound and light units. Might have to see about getting one for my Grand Hauler.
The grand haulers are cool rigs for on road but honestly the hg trailer and either the hg 802 to pull it or the hg 602 creation of mine to pull it around. The hg trailer fits the 870k perfectly as you can see in my videos. the 360L will work as well. When pulling off road the king hauler can't hold a flame up against a awd 6x6 or 8x8 diff locked beast. Even my 6x6 overland Ive set up for pulling options for big equipment. I had a few Gand haulers etc in past sold them off due to the power I can get out the the other models. Even cross Rc rigs
Awesome work !!!
The excavator is excellent. The ooooonly thing i don't like is the yellow colour. It looks a bit plasticy for something that is not. 😄 Great vid
For the amount of money that that thing costs it should come with a decent sound system as sold
That's extremely COOL Bob!
The Beier always sounds great through my Reference Headphones. 😉
Unfortunately none of it really helped me with my USM woes....
I really HOPE I'm not just suffering from Dumbassitis!
Very. Cool. Over. My. Little. Brane. U. Do. Very. Nice 👍. Work. Always. Watch. Lee
This thing looks like a lot of fun. Unrelated but do you use and would you consider adding the lesu or other brand custom parts to the tamiya trucks. There’s a lot of cool looking stuff out there to add realism. The tamiya trucks are far to expensive for me to get into so I have to get my fix through TH-cam channels like yours
Great video. Just about to install this soundunit on my excavator. How do I add sound when rotating it and also when lifting the arm and tilting the bucket?
Thanks Bob for the tutorial and nice video. How much do you charge to do these sound, light upgrade and radio reprogramming?
Very nice video , learned a lot .The squeeze4 sound came from IIww , what is the Beier siound file where it came from ?
interesting about the ibus plug on the receiver. I wonder if the SMB can get sounds through there and not require the use of 2 open channels. I'll have to research that if it is a possibility.
I really like that feature. Makes hookup so easy.
Very nice . And helpfull. Beier is the best couse you can configure it as you want. See my dozer with beier sound module. The sound is exactly dozers sound.
I am looking forward to doing the dozer!
@@HobbyconceptsLLC you can see my dozer sound in my channel and give your opinion. Every sound is sampeled from true dozer.
Yaa. I’d need help with that ..
Hey bob, got a littel tip for you. If dont know already, there is a sound simulation mode in the top row under the help in the soundteacher. It plays all the sound like its in the truck or excavator.
Yeah, I have used it and is a cool feature. When I do the tutorial videos on the units I will showcase it.
Super video Bob and full of tips. Using that Beier unit do you still have to use a Resistor at each led? or does the Beier take care of that?
The Beier puts whatever power that goes into the unit out to the led's so you do need a resistor. I used the led's that have a built in resistor that I sell.
Hello from Australia Bob, I love your videos, they are very informative and have helped me many times.
I would like to make a suggestion re the sound system. If it can be done, a beeper as the excavator walks, as now days it is standard fittment on all excavators from a small 2 tonner right up to a 550 tonner.
Also is it possible to have the engine sound change tone as the hydraulics are used, like the engine is loading up when hydraulics are activated.
Looking forward to seeing your next video.
Steve.
The Beier will do both easily. The only limit is what you want to do.....
Hello, why does my sound go really low and distorted after a couple minutes? I tried everything.thanks
Now paint that excavator as a WW I theme color and you're ready for battle to dig some trenches
That's Beier Sound unit. Would I be able to hook some 12v 40mm fans to it?
Not sure why you would want to run fans through it. It needs no cooling. If your motors or esc's need fans probably best to wire them direct so when you turn on your unit the fans run.
YOU'VE DONE A SPECTACULAR JOB WITH THE PROGRAMMING FOR THE CONTROLS LET ALONE THE SOUNDS. I WOULD NEVER HAVE THOUGHT OF SOUND VARIATIONS LIKE THE ONE I JUST THOUGHT OF THANKS TO YOUR SHAREING. HOPEFULLY I CAN EXPLAIN THIS UNDERSTANDABLY. (IF THAT'S A WORD). IF YOU SET THE IDLE AT MEDIUM CONSTANTLY, CAN YOU LINK THE ENGINE SOUND TO GO HIGH WHEN EVER YOU USE ANYTHING LIKE THE BUCKET, ARMS, TRACKS, OR ANTHING ELSE THAT WOULD GIVE THE ENGINE A LOAD AND GO BACK TO MEDIUM WHEN GIVING LESS THE LOAD? AWESOME JOB ON THE INFO YOU SHARED! I LIKED AND SUBSCRIBED (SOMETHING I RARELY, IF NOT PRACTICALLY NEVER DO) THANK YOU VERY MUCH AND I MAY BE SETTING ANOTHER BANK ACCOUNT UP TO SAVE AND BUY ONE OF THESE.😃
You could link the engine sounds to the movements. For example move the arm and it speeds up but in reality having the switch just makes it easier. The sound on this unit does work very well.
Are those tracks proportional at all, or just on or off?
They are just on/off with this transmitter. Does seem to work fine like that.
Your Beier sound systems are out of stock. When will you have them back in stock?
Waiting for an order now. Probably late January.
Why didn’t you mix the sound module revs with the sticks . And tracks
Because on real excavators they do not work that way. They set the throttle then dig and the throttle stays the same.
❤👌😍🔥👍
Great video Bob, great explaination.
Don't you care about the German spelling (like one of the commentators). It's the facts that matter and we all know, what you're telling us.😉
Greetings from Münster (Germany).
Hi there Beautiful work. I just wondered would it be possible to buy the system from you already pre-programmed. I would want exactly the same as in the video. I would also need the speaker and the fuse. Thanks
Not at this time but something I would like to do in the future. It is really not that hard to set up.
@@HobbyconceptsLLC thank you i’ll keep watching. And I’ll keep an eye on your shop. Thanks forgetting back to me and love the content
Can Beier SFR-1 be applied to the hydraulic excavator?
No as it only has one speed control and you need 2. The USM is the way to go.
@@HobbyconceptsLLCoh, i see thank you
Have you ever weathered stuff to look old
Sure, here is a video: th-cam.com/video/GkLju9YItcQ/w-d-xo.html
Hi Bob have you had any reliability issues
Not yet. I just love this thing....
Hi bob.whats the best way to order from rc4wd. Will they do paypal through your work debit card
Just check the details on their website.
What is the name of that sound system beer? Could I have the correct spelling and where can they be purchased at thanks so much I'm very much into the heavy equipment I found your Channel and it is awesome thank you so much and I subscribed looking forward to watching many more videos
In the U.S. look here: hobbyconcepts.net/collections/beier-electronics
@@HobbyconceptsLLC I cannot figure out how to get into what you're trying to get me into what store I'm supposed to be buying this from what are they wanting they're wanting an email address I put my email address in and it says that it's not qualified or do you want me to put Arizona in the email address I'm getting very frustrated
If you are in the U.S. go to Hobbyconcepts.net
@@HobbyconceptsLLC it says that I do not have access to that store
Can you contact me about doing the same thing you did for the same excavator in this video....
My email is in the video description
Hi Bob you think you could sell your day cab back pannel for the king hauler just the pannel i subed and liked
I don't ever have the back panels but you can make one. Just watch my day cab video.
'Beier', in German, is pronounced like 'buyer' - 'Bagger' like 'bugger', even if it's working fine.
Horrible decision to scew the speaker on that way, in my opinion. Expensive to undo it.
My German is pretty weak :-)