I have a hard top. Just took it from Joplin, to Branson, back home to Joplin. About to take it to Texas later this week. Truckers laugh when I pull alongside at 80mph! I wish I had another to play with like yours
I pulled them off of a Honda Pioneer UTV, they're 4x110mm lug pattern so i had to run adapters to make them work on the 4x114.3mm lug pattern. Front tires are 25x8-12 and the rears are 25x10-12.
I had the same issue but I trimmed the excess threads that stuck out beyond the nut and its been fine. I need to do another video but I've since built a hatch with more lift and 27" tall tires that I daily drive to work.
@@josephcarlson1774 right on. I got the 95+ springs with the strut top flip on front (thanks for that idea). Axles just look like they are at an extreme angle.
@@Techmech2 if the angles are too bad, you can build some spacers/brackets to drop the engine and trans down, depending on your fabrication skills/equipment
Any way to get a bit taller lift? I'm thinking about building one lol plenty of them around for 500 bucks. But im very rough on shit I know ill pile drive that front end into the ground 😂😂 im thinking spacers for a wider stance out past the body like a UTV and keep the 25s or maybe a skinny 26/27 and just have a blast. The rest will come as I go along. 4 door, 2 door, hatch car or the convertible idc i just wanna start cutting it up. I'm gonna tag it too 😂😂😂 driving around a goofy ass offroad toy
you are as bad as i am my dad gave me his old one that looked like yours and i got in to it with my old girlfriend and jumped it down a hill at the school i got about 5 feet of air and wreaked it good my dad was so pissed at me he thought he was realy funny and gave me his white one in his will when he died i cant believe how good they are off road i want to do that to mine good job keep tearing it up i love it
I have a hard top. Just took it from Joplin, to Branson, back home to Joplin. About to take it to Texas later this week. Truckers laugh when I pull alongside at 80mph! I wish I had another to play with like yours
Edit- Joplin to KC to Branson to Joplin. Visited Worlds of Fun and Saltgrass Steakhouse, then Branson and back to Joplin. A whole $40 in gas!!
That’s gotta be the best thing to happen to a Geo... ever! Good stuff!!!
24hroflemons geos are a bit better...a bit...
3:54 Come on, li'l guy, you can do it!
Yaaaaay! You did it!!!!
Reminds me of my old project "Ecomudder".
Oh I've seen it! You're pretty well known name in Geo Metro forum/FB groups.
Look here, cheaper than a Polaris and you can drive it to the piggly wiggly.
Find an old street bike motor and you got yourself a weapon
Dump bed, raised seats, and role over bars !
Bruh this thing's friggin awesome
Awesome ,hey can you send the wheels and tires size and specs ?
I pulled them off of a Honda Pioneer UTV, they're 4x110mm lug pattern so i had to run adapters to make them work on the 4x114.3mm lug pattern. Front tires are 25x8-12 and the rears are 25x10-12.
Where did you get the helper springs in the bacl
At the local parts store back in the day. You can still find them online if you look up coilover shock helper spring.
Bro do they make a half shft for this car i lifted mine and passenger side axle is hitting my lower control arm bolt
I had the same issue but I trimmed the excess threads that stuck out beyond the nut and its been fine. I need to do another video but I've since built a hatch with more lift and 27" tall tires that I daily drive to work.
I would love to do this to mine
What size winch did you put on her?
2,500lb harbor freight winch
@@josephcarlson1774 right on, same with me.
What's your axle angle at?
It's not bad, I haven't had any binding issues or anything like that.
@@josephcarlson1774 right on. I got the 95+ springs with the strut top flip on front (thanks for that idea). Axles just look like they are at an extreme angle.
@@Techmech2 if the angles are too bad, you can build some spacers/brackets to drop the engine and trans down, depending on your fabrication skills/equipment
@@josephcarlson1774 For sure. Unfortunately that will exceed my budget for this "Shambler" build. I'm cutting it close as is!
Any way to get a bit taller lift? I'm thinking about building one lol plenty of them around for 500 bucks. But im very rough on shit I know ill pile drive that front end into the ground 😂😂 im thinking spacers for a wider stance out past the body like a UTV and keep the 25s or maybe a skinny 26/27 and just have a blast. The rest will come as I go along. 4 door, 2 door, hatch car or the convertible idc i just wanna start cutting it up. I'm gonna tag it too 😂😂😂 driving around a goofy ass offroad toy
What car or truck are the rims from?
4x110mm Honda Pioneer 700 wheels and tires.
Thanks
you are as bad as i am my dad gave me his old one that looked like yours and i got in to it with my old girlfriend and jumped it down a hill at the school i got about 5 feet of air and wreaked it good my dad was so pissed at me he thought he was realy funny and gave me his white one in his will when he died i cant believe how good they are off road i want to do that to mine good job keep tearing it up i love it
Is the engine bay still stock???
Yep, 100% stock 1.0L 3cyl and 3 speed automatic transmission.
@@josephcarlson1774 thats amazing
First!
Haha, that's kind of easy on my channel...