Genie 3 Button Remote Programming Replaces Old Style Remotes

How do I program a Genie remote? Let me show you.
To successfully program your remote, you must have it within frequency range of your Genie opener.
Then, follow these simple steps for most models (consult your owner's manual for specific instructions for your model):
Locate the "Learn Code" button and LED indicator. Depending on the model of garage door opener you own, "Learn Code" is typically located near the antenna of the unit.
Press and release "Learn Code"; the LED indicator will blink at a rate of twice per second. Press and release the button on the remote you want to program; the LED indicator will flash or glow steadily (varies by model). Press the same remote button again; the LED indicator will go out.
To check that the Genie G3T-BX Remote control button has been programmed correctly, press the button on the remote again; the door should operate. If it does not, carefully repeat the steps above. And remember to clear all people, pets, ladders, vehicles and other obstructions from the garage door’s path before activating (see our Safety Center for more information.)
Repeat the steps above for multiple doors and/or remotes with multiple buttons.
Genie Chain Door Opener:
amzn.to/2PLZvrV
Genie Belt Door Opener:
amzn.to/2R1c0QP
Genie 3-Button Remote
amzn.to/2NUMrmB
Genie 3-Button Remote 2-Pack
amzn.to/2OD1DC2
Disclaimers: all opinions are my own, sponsors are acknowledged. Links in the description are typically affiliate links that let you help support the channel at no extra cost.
Genie G3T-BX Remote control

[@TheChaparro714]

Tried for like 20 mins and with this tutorial took me 1.thank you

[@TheChaparro714]

Man, thank you!!! I was trying for like 20 mins then with this tutorial I did it in one min

[@connieester8882]

Thank You! Your video helped me with my Sis in-laws old garage opener, setting up this remote and was easy once I found the program button. Thanks again

[@jeffcamp9008]

Thank you ,simple instructions some try and make it complicated.

[@peachparee7647]

Awesome, ty!

[@simbanguyen7069]

Thanks!

[@treymathis7159]

God bless you and God bless TH-cam 😅

[@alexybarra2841]

Way to go bro I was able to program my remote ASAP, Thanx 👍

[@jenal5010]

Quick simple

[@JoeyDon10]

Thank you! Have been trying to find a video to make a new remote work with old system.

[@RUACOINCIDENCETHEORIST]

Doesn’t it matter what YEAR your garage door opener is?

[@NightriderXP1]

How would you program all 3 buttons to the same garage door opener? When I tried to program a 2nd button to the same garage door opener, the remote appears to have forgotten the programming for the previous button. I really only needed one button, not 3 small ones...

[@peachparee7647]

So why are you trying to program all 3 when you say you just need 1 of the buttons? The other buttons are meant for other garages

[@2012juarez]

How do you do this but with two garage remotes that need to be on the same frequency?

[@pamelat3287]

I have a set of 2 GICT 390 Genie remotes. Starting to not open door every time. Why are there 3 buttons on them, what do they do. I only need 1 button for 1 garage door. What do I replace them with? Item number?

[@WrestlingOne]

how do i program it to close the garage door?

[@vwtch]

And if you have two of these because you have two cars ??

[@barbnorris3762]

My Genie Pro88 is from 1994. There is no learn button. Do you know how to program a remote to it?

[@zognowak2842]

I got seasick.

[@moto2614]

Can't program my garage door

[@jaystevers3486]

Model 3060l

[@jorgemendiola1216]

Too fast I got it the second time I what you to video good video

[@marcellafleming8218]

Genie programabe remote

[@leonelaldana5254]

Yfyftytyfyfyffytfytytytyfyfyftyftytytfyfytytytytytytytyftytyftututututuftututututututututfutufuffuuftufuffuuffuuftuftfufutfufufufuugyu

[@jamunamadhava3214]

Too much shaking

[@josea.alvarado2548]

Da f!