Diesel fuel systems, wastegates and loads of BS
ฝัง
- เผยแพร่เมื่อ 11 ส.ค. 2023
- Casting couch magic with Fred. Trashing wastegates all and for once. Also talking fuel systems and how to set it up.
#boost #dieselpump #ftuneperformance #mercedes #mercedesdiesel #om604 #om605 #om606 #superturbo #superturbodiesel - ยานยนต์และพาหนะ
good education! learned a lot - thank you!
This info is so basic that its not even educarion! If you run a 606 turbo for years with a wastegate and just now found out how a diesel works you have not got educated, you have just become a tiny bit smaller of a idiot than before 😊👍🏻😂
internally wastegated turbos have a tiny little plug compared to the waste gate look at stock turbo or holset
when is the next video coming out?
😘
My l3b high pressure turbo is still wired shut. My low pressure he351cw that compounds it still has the wg at 14 psi. Should that remain the same?
Hi Fred. What s a reliable EGT gauge. I can t make a choice. Prices go from 0 to sky high. Don t trust the internet. I m searching for the 650 deg. you mentioned earlier. Tnx. Looking forward to your next video. (With loads of Fuck and Fucking 🤪) Greetz from also a cold Holland or Nederland as we call it...
I just crawl under and put a vice grip on the hose and boost to the moon. Sadly it kills the turbo in about 25,000 miles at best. But 58psi vs 25psi... 28mpg vs 16mpg.
So you're overfueling 28psi 🤷♂️🤷♂️🤷♂️ understand what kind of damage that does to your engine 🙈 So lower your fuel till the 25psi you want and run a healthy engine setup. It's not rocket science.
@@FtunePerformance You are making a fool of yourself bro. You would assume with as name like yours you would have a clue but you obviously don't.
@BentonLedbetter I love you hahahahahahaha. Stand up comedian 💪
@@FtunePerformance I will put my slowest truck up against yours any day.
@BentonLedbetter ok meet me at the ring and we'll have a go. I'm slow, I do 9s.
Its so funny this! That all exhaust manifolds you can buy online aftermarket billet or cast iron in kits with manifold and a turbo for 250-500hp for om 602/603/605/606 etc have a hole for a wastegate 🤣 This must mean that all company making these dont know the basics about how a diesel works! Or they see that most people believe the fairytales that a mechanical pump diesel engine need a wastegate and laugh when they make money on people buying wastegates for their dieselbuild 😂! Thanks again Fred awsome video ❤️//Albin
Hahahaha så är det. Cash is king
@@FtunePerformance Only thing you need to do is when you order a pump call Dieselmeken and say what turbo and so on you are usin on your engine maybe a HX40 super like many people and around how many horespowers you are looking for and they Will set your pump fueling up for that! Its that easy 👍🏻
@@Fisgrisen communication mate 🙈 It's hard.
Ok, that's interesting!!
Tried on my om605 edc gtx30 1.7 bar,, to close wastegate,,
boost goes to the sky 🤯,,3bar,,
So definitely its owerfueling,,,
The Question is, is it known how much lbs[kg] of air we gona see for every given cc of diesel?
There no direct answers to that because of everything surrounding your power. Leak down, compression and so on... Therefore can the pump builder not set the fuel to your power. Just to some kind of ball park number.
@@FtunePerformance ok, I see
For edc pumps then, is it posible to tune msa25 in the way that it keeps fuel for no more than lets say 2 bar ?
Then it would be like a virtual wastegate,,
So many misinformations but luckily not many people will hear them
🙈🙈🙈