It's easily the most aesthetically pleasing PC I've ever seen. This is as close to my dream PC as i could've imagined. However, after 10 years of buying all Asus components, I'm done with them. Reasons! Either way, this is an amazing build. Well done.
@@a.morel0001 That would be ridiculously low considering the amount of tool, knowledge. He also need to think how to customize it, what would looks good, then take it to reality and then build it It's such a high level of customization that you could easily call it a piece of art, and a piece of art of such complexity at 300 USD would be a bargain in my humble opinion, if he had to offer his customization services to customer it'd start at around 1.000 USD and could go higher depending on what the customer ask
I find big, open fish tank itx cases quite unsightly. Your wooden build, though, is one of the very few large builds that I actually find pleasing to look at. Very nicely done, as usual ;-)
I found this when I was searching reviews on the asus ProArt mouse. Damn this is such a nice build with a beautiful result. Good luck in the creator space!
Nice woodwork combined with beautiful products - resulting in an awesome bespoke piece! Video production well planned, showing nice intricate work. Top notch sir! 👍👌
Asus ProArt works the best with Intel because of how fast Intel CPU’s are with it’s a big amount of cores and performance cores and a lot more ryzen is more focused for gaming would fit better in a ROG themed PC 😅 When ProArt is more meant for content, creation and as working station’s
I absolutly love it. One tip I know rgb doesnt fit the build but in my recent build i wanted to go minimal rgb and ended up with proart 4080 and i then took my aios rgb fans that i wanted to replace with black ones and got them a beige color that perfectly fits the proart style. It also gives a nice soft top light to the case and everything pops a bit more tho i also work on the pc when its dark when the effect is best
Great build but oh man, I was terrified about that small piece dropping in the big hole in the router table jig, destroying your fingers! Same with the hazard drilling of a tiny piece with a big drill bit without clamps or anything. You're living on the edge there 😅 Also, I wish ProArt wasn't so expensive, those look so good compared to most of the other "gamery" stuff out there
@@mxcbuilds6633 I have a question, have you figured out the dust filter led? Did you connect it or do anything with it? I cant find where the cables go, or what to do with it so i left it unplugged, unless its already plugged and aint doing anything?
Can't remember exactly, but the manual should show it clearly. I believe the led only lights up when the filter needs a clean. So for a new system it should stay off
Very Clean build. I like what you make it. 👍👍 But for me is the Pro Art case to Big approximately 10 cm in High and lenght shorter and its a buy for me.
Kinda surprised that carbon fiber or imitation isn't used more often for cases.. Especially for a more gamer aesthetic. I recently ordered this case, and once I get a good look at it in person was thinking of ordering some vinyl.
I think the fake carbon fibre look was very popular when real carbon fibre initially was introduced. But I feel these days it might seem like a gimmick or tacky when it's mechanical properties aren't actually required. Even more so when it's fake vinyl carbon. But that's just my observation
@@mxcbuilds6633 Eh still pretty popular for many things, be it carbon, marble, metallics, iridescents. The same could be said of wood veneer as well. It's just a preference of texture, pattern, or color. Personally for something like this I'd prefer vinyl over the real thing. Real carbon fiber can be fairly hazardous to work with without the right PPE. Micro filaments and all that.
Super clean looking build. It's pretty much what I would like to do with my ProArt Z790 board. Unfortunately the LC-420 cooler isn't available from US retailers, yet...(fingers crossed) One thing I am curious about. You often use magnets for attaching accents which is a brilliant idea to keep fasteners hidden. Why not use them on the wooden accent panels and hose clamps for the AIO?
I'm sure they will release it soon! Keep an eye out 😁 Great question, I didn't use them for the wooden panels in this case because the base shrouds were not metal so magnets wouldn't stick. As for the hose clamps, I think magnets wouldn't be strong enough and I don't mind the screw in the clamps adds an element of detail to it.
@@mxcbuilds6633 Thanks for explaining. I do like the screws in the clamps as well. I can't wait to see what your next build looks like. I like the wood and metal combinations. I would build one myself, but without a laser cutter I would have to cut the plywood by hand with a coping saw. I am not sure I could get the level of detail you do. Still, your build are inspiring.
www.asus.com/motherboards-components/cooling/proart/proart-lc-420/ you can get some info on it here, I'm not sure about the release dates in your country tho.
@@mxcbuilds6633 yeah i found 1 small channel. One. He said not really much better than a 360 and it's loud under load. Found 4 or 5 Asus sponsored build videos though. Meanwhile the NDA lifts on the Arctic Liquid Freezer 3 today and within a couple of hours I saw at least 5 reviews by reputable channels inc Gamer Nexus. ASUS weird af for that. The funniest part, I ordered a LF 2, 3 days ago, because I couldn't see any reason why the LC 420 is more than double the LF 2.
![ลองสุ่มไอโฟน 990 โกงมั้ย? [ โกงมั้ยครับ ep.101 ] | DOM](http://i.ytimg.com/vi/bfsWe0j492k/mqdefault.jpg)
Asus better be watching this. You've just raised the standard. Excellent work.
Thank you!
Asus did just release a wood trim PA602. It's only wood trims for the front panel like Fractal North though.
Outstanding! I love the gold accents and the wooden cable clamps are so nice
Thanks! Glad you liked them :)
The impeccable attention to detail is satisfying af. And also inspiring! Loved the build!
Thank you!
that is actually so cool, i love all the custom accents, and the black panel to cover up the holes was a great touch!
Thank you so much 🙏
It's easily the most aesthetically pleasing PC I've ever seen. This is as close to my dream PC as i could've imagined. However, after 10 years of buying all Asus components, I'm done with them. Reasons! Either way, this is an amazing build. Well done.
Thanks!
If you started a PC building company you'd probably be rich
Hmmm how much extra would you pay for a customisation such as this? Just curious 🤔
@@mxcbuilds6633i think that for a high-end build someone is ready to pay like 300$
@@a.morel0001 That would be ridiculously low considering the amount of tool, knowledge.
He also need to think how to customize it, what would looks good, then take it to reality and then build it
It's such a high level of customization that you could easily call it a piece of art, and a piece of art of such complexity at 300 USD would be a bargain
in my humble opinion, if he had to offer his customization services to customer it'd start at around 1.000 USD and could go higher depending on what the customer ask
@@mxcbuilds6633$5k all day long.
@@a.morel0001more like 1000+ for the stuff he makes on his channel, esp if it's still solo labor
Absolutely nothing ProArt about that case until you added the gold to the fins. Nicely done.
Haha thanks!
Loving the little video effects you’ve added on to this video 👀 so satisfying!
Thank you! Slowly trying to improve the production value of these video 🙏
This came out fantastic. I have some ProArt pieces, but this was next level. Keep up the good work.
Thank you very much!
I find big, open fish tank itx cases quite unsightly. Your wooden build, though, is one of the very few large builds that I actually find pleasing to look at. Very nicely done, as usual ;-)
Thanks very much!
This PC is basically a piece of art
Thank you :))
Love the little edditing idea you are getting with the cooling mount screws and slide of RAM. Keep it up, great video!
Thank you for noticing!
i GOT GOOSEBUMBS AFTER WATCHING THIS WHOLE VIDEO. GREAT WORK THERE MXC BUILDS!
Thank you! Welcome to check out my other builds as well, I think you'll like them too
Gorgeous PC, love all the additions you made
Glad you like them! Thanks for watching :)
Great Craftmanship! Keep going man! 😊😊😊
Thank you!
I have a funny habit. I just bought this board without research and then watch review videos to make myself feel better.
Haha that's okay, good to see it's a beautiful board
Now this is ART. Well done, really, this is astonishing
Thank you! Glad you liked it :)
I found this when I was searching reviews on the asus ProArt mouse. Damn this is such a nice build with a beautiful result. Good luck in the creator space!
Glad you liked it, thanks for watching!
Great craftsmanship and relaxing video! Those standoffs worked out perfectly.
Thank you very much!
You're an artist, Loved the build!
Thank you so much!
I absolutely adore your creativity. I would not be able to come up with such ideas. 👍
Thanks!
This is the first vid I watched from you, thoroughly impressed and inspired!
Welcome to the channel! Feel free to check out my other wooden PC builds. I'm sure you'll like them too 😄
I loved the gold detail you added at the ram sticks.
Thanks!
I wish your channel *wood* get more views, you do some amazing things
Thank you, I hope so too
Nice woodwork combined with beautiful products - resulting in an awesome bespoke piece! Video production well planned, showing nice intricate work. Top notch sir! 👍👌
Thanks for watching and detailed feedback :)
i've never seen anything like this, magnificent work dude
Thanks a lot!
This is the absolute best build ive ever seen!!
Thank you! Do you think this is the best out of all my other builds too?
Now this is the definition of custom pc build!
Thank you for watching!
What a beautiful Art piece
Thank you for watching!
Wow, this is great! I wish Asus will buy your design.
Thanks! There is a trend towards wood on cases now so maybe they will try
Asus ProArt works the best with Intel because of how fast Intel CPU’s are with it’s a big amount of cores and performance cores and a lot more
ryzen is more focused for gaming would fit better in a ROG themed PC 😅
When ProArt is more meant for content, creation and as working station’s
Sure, thanks for the advice
Proart is the best looking hardware on the Markt right now , LOVE IT !
I agree! So subtle and elegant
Such a beautiful build.
Thank you!
Hey man I love your PC builds. With your 3D printed parts what sort of filament do you use for your GPU standoffs?
Pla+
Perfect !
Thank you!
I like the added details
Thank you!
These are beautiful works of art. Well done!!
Thank you very much!
I absolutly love it.
One tip I know rgb doesnt fit the build but in my recent build i wanted to go minimal rgb and ended up with proart 4080 and i then took my aios rgb fans that i wanted to replace with black ones and got them a beige color that perfectly fits the proart style. It also gives a nice soft top light to the case and everything pops a bit more tho i also work on the pc when its dark when the effect is best
Great suggestion! Will try that next time :)
Absolutely in awe with your build. Which 12hpwr adapter did you use on your ProArt card?
Thanks! It was a aluminium one from AliExpress. Just the 180 adapter, then connected straight to the PSU stock cables
@@mxcbuilds6633 building a system in the Fractal North XL, and you have inspired me to take my time and make it unique. Thank you!
Wow, awesome build my dude! Subscribed
Thanks for the sub!
Great job! It would be cool if you added a bit more B roll to the end of the video so we can appreciate if for longer.
Thanks for the suggestion will definitely add more in the future! For now, I've posted some nice HD pics of the build on my Instagram 😄
Excellent! Combining 2 of my hobbies :)
Me too! haha thanks
So damn beautiful!
I just love no-RGB builds like this one.
Thank you! Check out my other non RGB builds too 😄
Work is outstanding. I can’t help feel that the 7700X is a little underspecced compared to the rest of the system though?
Thank you! Yep it's definitely not the top tier CPU, but was what I could get my hands on for this particular build
Great build but oh man, I was terrified about that small piece dropping in the big hole in the router table jig, destroying your fingers! Same with the hazard drilling of a tiny piece with a big drill bit without clamps or anything. You're living on the edge there 😅
Also, I wish ProArt wasn't so expensive, those look so good compared to most of the other "gamery" stuff out there
Haha thanks for the concern. It was abit sketchy but I took the risk as I've done it before and was being very cautious.
Excelent work, this alone adds so much to the pc. I just got the pro art, and i would like to do something simular.
Thanks! Glad you liked it ☺️
@@mxcbuilds6633 I have a question, have you figured out the dust filter led? Did you connect it or do anything with it? I cant find where the cables go, or what to do with it so i left it unplugged, unless its already plugged and aint doing anything?
Can't remember exactly, but the manual should show it clearly. I believe the led only lights up when the filter needs a clean. So for a new system it should stay off
Asus wish they had this level of design in their products
Thank you! But I do feel their ProArt line of components are really elegant. Not many on the market with this subtle aesthetic currently.
now that's a designer pc, love it!
Glad you like it! Thanks for watching :)
My goodness bro... THAT WAS GORGEOUS
Thank you so much!
Very Clean build. I like what you make it. 👍👍
But for me is the Pro Art case to Big approximately 10 cm in High and lenght shorter and its a buy for me.
Thanks for watching! It surely is a larger case, might be part of future proofing if GPUs get bigger and bigger
Kinda surprised that carbon fiber or imitation isn't used more often for cases.. Especially for a more gamer aesthetic.
I recently ordered this case, and once I get a good look at it in person was thinking of ordering some vinyl.
I think the fake carbon fibre look was very popular when real carbon fibre initially was introduced. But I feel these days it might seem like a gimmick or tacky when it's mechanical properties aren't actually required. Even more so when it's fake vinyl carbon. But that's just my observation
@@mxcbuilds6633 Eh still pretty popular for many things, be it carbon, marble, metallics, iridescents. The same could be said of wood veneer as well. It's just a preference of texture, pattern, or color.
Personally for something like this I'd prefer vinyl over the real thing. Real carbon fiber can be fairly hazardous to work with without the right PPE. Micro filaments and all that.
9.5 on 10. 7 ProArt mentions might be overkill but otherwise all class.
That's fair, thanks for watching!
B-rolls looking smooth 🥵🥵🥵
Thank youuu ❤️❤️❤️
I saw the new aio 420mm and I'm in love
Yeah it's great especially since it comes with noctua fans!
You deserve more subscribers!
We will get there slowly! Thanks for the support :))
Hello, what a great job. If you don't mind, could you share with me the plans for your wood modification?
Sorry for delayed response, I was working on other projects. Please drop me a DM and we can discuss this if you're still interested, thanks!
Nice build. Keep up the good work.
Thank you!
Super clean looking build. It's pretty much what I would like to do with my ProArt Z790 board. Unfortunately the LC-420 cooler isn't available from US retailers, yet...(fingers crossed)
One thing I am curious about. You often use magnets for attaching accents which is a brilliant idea to keep fasteners hidden. Why not use them on the wooden accent panels and hose clamps for the AIO?
I'm sure they will release it soon! Keep an eye out 😁
Great question, I didn't use them for the wooden panels in this case because the base shrouds were not metal so magnets wouldn't stick. As for the hose clamps, I think magnets wouldn't be strong enough and I don't mind the screw in the clamps adds an element of detail to it.
@@mxcbuilds6633 Thanks for explaining. I do like the screws in the clamps as well. I can't wait to see what your next build looks like. I like the wood and metal combinations.
I would build one myself, but without a laser cutter I would have to cut the plywood by hand with a coping saw. I am not sure I could get the level of detail you do. Still, your build are inspiring.
Right angle motherboard adapters should be the default
Indeed
Pro Art by you.
Thanks!
Great build.
Thanks!
Love 😍 bro 💕 Your Artwork
Thanks ✌️
Crazy and sick!😊
Another masterpiece
Thanks for watching!
Amazing job!!! I love it
I'm glad you like it
Dear lord look at this thing 😧
Thank you!
Nice work.
Thank you! Cheers!
Beautiful!
Thank you! Cheers!
j'aime beaucoup les heolienne en facade 😀
Thanks! 😊
Spectacular!
Thanks!
Beautiful!
Thank you! Cheers!
Absolutely Stunning 🤩
Thanks! ❤️
Amazing Build!
I'm glad you like it! :))
@@mxcbuilds6633 sure I like it! I have a ProArt Build too but watercooled in a Fractal North. I damn love that Series and I hope Asus continues it.
Fabulous!!
Thanks!
That looks much better!
Thank you!
a absolutely wonderful work
Thank you! Cheers!
good job
Thank you! Cheers!
Masterpiece
Thank you!
Выглядит шикарно и строго ❤😊
Thank you!
Really nice work man
Thank you! Cheers!
Another BEAUTY!
Thank you!
Dream rig
Thanks!
hey man, are those standoffs custom made or are they publically sourced? anyway to get my hands on the files?
They are custom designed to work with the riser cable I have. Likely won't work with the one you have sorry
You were using the Rioba wrong. For this type of cut use the other side of it.
I thought the larger teeth are for cutting along the grain and the smaller teeth for across the grain?
😍😍😍😍
Thank you for watching!
Дорого богато 😊👍
Thanks!
👏👏👏👏
Thanks!
Beautiful
Thank you! Cheers!
Да, это красиво! 👏
Thank you so much!
what is your GPU/hotspot/memory temp in HWINFO64 under Time spy extreme stress test OR 20mins fullscreen FurMark? (and your room temp?)
Didn't get those extract measurements. As I'm not using this as my main PC I'll have to get it out of storage to do the testing, maybe next time
Did they share any indication as to when the LC 420 is going to be made available to the general public?
I'm not sure on the exact release schedule sorry
parfait !
Thank you
you found the missing piece in that case, hope Asus gives you some props
Thanks! Glad you liked it :)
Thank you!
Why cant I find any information on this cooler? Ive been trying to find anything about this aio and haven't gotten any luck
www.asus.com/motherboards-components/cooling/proart/proart-lc-420/ you can get some info on it here, I'm not sure about the release dates in your country tho.
I just hope that the PC case can be a bit more compact. It looks rather empty for me. Asus please release a mid-tower (mATX) version soon!
I would definitely be interested in that too
Looks great, but man no one is actually testing that AIO. For 2 days now I been scouring the net and YT for some actual testing of the LC420.
I believe there's is a channel that tested it
@@mxcbuilds6633 yeah i found 1 small channel. One. He said not really much better than a 360 and it's loud under load.
Found 4 or 5 Asus sponsored build videos though. Meanwhile the NDA lifts on the Arctic Liquid Freezer 3 today and within a couple of hours I saw at least 5 reviews by reputable channels inc Gamer Nexus. ASUS weird af for that.
The funniest part, I ordered a LF 2, 3 days ago, because I couldn't see any reason why the LC 420 is more than double the LF 2.
I like it.
I'm glad, thanks for watching!
@@mxcbuilds6633 keep making stuff. I hope to join you custom builders someday ☺️
nioce!
Thanks!
Comment..Comment..
Comment