Hi, all my projects are setup quiet simply. I always put groups in this order - pad1 drum kit 1 (drums of your choice) - pad2 drum kit 2 (different drums so I can swap between them by muting one or the other - pad3 hats/rides - pad4 percussions - pad5 drum loops (usually with hi pass filter and chopped so variations can be used) - pad6 shorter synth sound like blips, zaps etc - pad9 bass samples - pad10 lead samples - pad11 voices (if there is any in given project) - pad12 additional sound (if needed or if additional ideas appear ) - pad13 crash/cymbals Sometimes I’m using pad14/15/16 for midi to control my external synths Every channel have compressor on and some fx (plus of course other effects but compressors are always there;) Master out is lowered to -9db And there is usually XYfx on master to do stutter effect during performance. Then using second MPC connected with Ethernet cable and synced thru link you can stop one while the other still plays and you can swop projects that way;) But you can make long live set with only one MPC, it would require bit different approach but it is doable. I hope that helps;) Have a great day banging out beats;)
I've been searching around for videos on break beats and totally got sucked into your song, its so good!
Glad you like it;)
Good to hear someone with combo AKAI + MODWAVE. It is so warming! Nice beats btw. :)
Thanks;) modwave is really great synth.
I really like this.
Thanks, much appreciated;)
Nice track mate. A little more laid back than usual. Great out there sounds!
Thanks buddy, much appreciated ;)
Hey where did you buy your mpc one skin
Yo, it’s from eBay. Look for novalays. Mine was plain white so you can design your own but they also make their own designs.
can you tell a little bit about how to setup project for live performance?
Hi, all my projects are setup quiet simply. I always put groups in this order - pad1 drum kit 1 (drums of your choice)
- pad2 drum kit 2 (different drums so I can swap between them by muting one or the other
- pad3 hats/rides
- pad4 percussions
- pad5 drum loops (usually with hi pass filter and chopped so variations can be used)
- pad6 shorter synth sound like blips, zaps etc
- pad9 bass samples
- pad10 lead samples
- pad11 voices (if there is any in given project)
- pad12 additional sound (if needed or if additional ideas appear )
- pad13 crash/cymbals
Sometimes I’m using pad14/15/16 for midi to control my external synths
Every channel have compressor on and some fx (plus of course other effects but compressors are always there;)
Master out is lowered to -9db
And there is usually XYfx on master to do stutter effect during performance.
Then using second MPC connected with Ethernet cable and synced thru link you can stop one while the other still plays and you can swop projects that way;)
But you can make long live set with only one MPC, it would require bit different approach but it is doable.
I hope that helps;)
Have a great day banging out beats;)
@@Cray23_Official oh, my man, many thanks!