Interesting video and I look forward to seeing more ... as for the partial spools of filament, hey, with most printers you get a 10m coil so 4 partial spools is a bit of a win! 😀
Thank you for your comment. I have been busy lately but will be putting out another video beginning of next week regarding issues and fixes, prints, tips and more. Stay tuned. Have an awesome day
@ thank you and I wasn’t trying to pressure you - there seems to be lots of ‘bitty’ information on the K2 Plus so far but no actual solid reviews … is there still an embargo on TH-camrs doing reviews on it or something like that?
Michael - no need to waste your time listening to miserable/ negative keyboard warriors, you keep doing you! Thank you for the video, I appreciate the time that you took with both of these videos.
Very good in depth unboxing video. Really impressed with how well packaged it was. I must say though I always thought the 'free' rolls of filament were not full rolls.
Hopefully I should get the table fixed tonight so I can do some more testing and record some more by tomorrow. Thanks for following. Subscribe for more updates
To all viewers, I understand that some of you may not like my video and I appreciate and will not get mad of the bad comments, I unfortunately broke my Led ring light which is the reason for the brightness and wanted to simply get the video out there because I was asked by alot of people to do an unboxing and I tried my best and did not spend alot of time on editing so I did not fix the exposure. Please forgive me about that. I also had a video card failure during putting the video together so I did what I could with whatever I had to get it out there. I am not a professional reviewer like many trusted reviewers out there of whom I have alot of respect and admiration for. I simply put this video together to give an idea of the printer. Sorry if it upset some people. Cheers
@@anthony566 so sorry about the lighting. My ring light broke but I did not let that stop me cause people wanted the video ASAP so I did my best with what I had :) Thanks for the feedback
@@dropbear9785 The 4 that were sent are with the RFID tags and the free one was with the Cardboard. However, the white spool with RFID tag worked once at the first start up and now it's not detected in any slot that I put it in which sucks
It was not a review. I am sorry that you wasted your time. Although I appreciate your negative feedback, others did appreciated seeing it unboxed. Cheers
![I Survived 1000 Days in Minecraft Hardcore [FULL MOVIE]](http://i.ytimg.com/vi/TjKcgBxLnQY/mqdefault.jpg)
![I Survived 1000 Days in Minecraft Hardcore [FULL MOVIE]](/img/tr.png)
![ละลาย (LALALYE) - DAOU PITTAYA ต้าห์อู๋ พิทยา [OFFICIAL MV]](http://i.ytimg.com/vi/wo6r9TgausI/mqdefault.jpg)
Interesting video and I look forward to seeing more ... as for the partial spools of filament, hey, with most printers you get a 10m coil so 4 partial spools is a bit of a win! 😀
Thank you for your comment. I have been busy lately but will be putting out another video beginning of next week regarding issues and fixes, prints, tips and more. Stay tuned. Have an awesome day
@ thank you and I wasn’t trying to pressure you - there seems to be lots of ‘bitty’ information on the K2 Plus so far but no actual solid reviews … is there still an embargo on TH-camrs doing reviews on it or something like that?
Michael - no need to waste your time listening to miserable/ negative keyboard warriors, you keep doing you!
Thank you for the video, I appreciate the time that you took with both of these videos.
Thank you so much for your positive feedback. Much appreciated
Only 15 minutes in but really enjoying the video. You have a really easy demeanour whilst talking to the camera 👍
Very good in depth unboxing video. Really impressed with how well packaged it was. I must say though I always thought the 'free' rolls of filament were not full rolls.
Really do appreciate your feedback . Thanks for the compliment. :)
Glad you enjoyed it
Thanks for yout time!
My pleasure! Much appreciated
Ty for upload waiting for part two
Hopefully I should get the table fixed tonight so I can do some more testing and record some more by tomorrow. Thanks for following. Subscribe for more updates
Appreciate the video. Cant wait to see more!
More to come! Thank you
They for sure from the start said half spools of filament. I can’t wait for mine to ship now. Good video.
Yes I may have missed that part about the spools but it sould have been nice to get full spools seeing that there was a delay along with the 10%.
Thanks for doing a full video!
@@lornelorne5727 you welcome. Appreciate your input
To all viewers, I understand that some of you may not like my video and I appreciate and will not get mad of the bad comments, I unfortunately broke my Led ring light which is the reason for the brightness and wanted to simply get the video out there because I was asked by alot of people to do an unboxing and I tried my best and did not spend alot of time on editing so I did not fix the exposure. Please forgive me about that. I also had a video card failure during putting the video together so I did what I could with whatever I had to get it out there. I am not a professional reviewer like many trusted reviewers out there of whom I have alot of respect and admiration for. I simply put this video together to give an idea of the printer. Sorry if it upset some people. Cheers
OMG thanks for sharing with us, subscribed and wating for part two.
Will post one soon even though the trolls and negative people on here. Thanks for your positve feedback. Cheers
Thx a lot greetings from Austria/Europe
You welcome. Will be posting more soon. Subscribe to follow :)
Still waiting on my printer. I was lucky enough to grab a 50% off unit.
I agree that full spools would have been a nice bonus.
Thanks for the video!
You'll get yours soon and you'll be impressed as well :)
Thanks for the video! Subscribed
You welcome. Please share for others to see :)
Thanks for the video... bdarthe lighting is quite dark.
@@anthony566 so sorry about the lighting. My ring light broke but I did not let that stop me cause people wanted the video ASAP so I did my best with what I had :) Thanks for the feedback
The spool holder so you can use TPU, great video I got 40% US coming in November
I figured that much :)
Man I’m jealous. I’m one of the lucky 200 too but still no printer apparently now will be the end of November.
Thank you :)
You're welcome!
Thabks for the video. More lighting would be a big help when trying to do an unboxing
My Led Lamp fell and broke just before the ideo but I did what I could with what I had :)
Thank you for sharing
Thanks for watching!
damn I'm already a bit jealous
Don't be. You'll get yours eventually. Thaks for the comment and happy printing
the filament rolls were as advertised on the site 4x quarter rolls :)
I may have missed it then. My apologies. However with the delays that occured, they should have given everyone full spools. You don't agree?
@@michaelcharles2224 I suppose so, but they did offer 10% off for life which I'm cool with personally 🙏
They all seem to be the new plastic spools (probably with RFID tags), not the "old cardboard spools" that I think were mentioned.
@@dropbear9785 their advertising photos always showed plastic, but it does work with both
@@dropbear9785 The 4 that were sent are with the RFID tags and the free one was with the Cardboard. However, the white spool with RFID tag worked once at the first start up and now it's not detected in any slot that I put it in which sucks
It would be awesome to see the CFS on top of the K1 and K1 Max!
Will put in on top the K1 Max tomorrow just for giggles. It will be in the next video so keep an eye out
Sooo does this mean no more content embargo?
@@Nowen97 I am a consumer and confirmed with the right people. Embargo does not apply to me.
Did you have to pay import tax on it?
@@princeclucks5843 I paid taxes of Canada and Quebec, that's it
Good ol Q-bexk.
Yess good old Québec
When is part 2 gonna be out?
Working on it now. Fixing the table lol
@michaelcharles2224 awesome! Thank you for the video great setup!
Pleasure. Thanks for following. Hopefully you subsribed :)
@@michaelcharles2224 i did :)
Does Creality own Govee?
Some people say they are affiliated but I don't know for sure. Sorry I can't give a concreet answer :(
@@jsmitty2333wf at the minimum they share a factory
You should have waited and not be the first one to make a review video. This was a waited of my time
It was not a review. I am sorry that you wasted your time. Although I appreciate your negative feedback, others did appreciated seeing it unboxed. Cheers
You`re just a troll! Start being more grateful, im sure you waste your time everyday, so thats not news for you!
Stupid comment. The video was exactly what it said it was - an unboxing video. Being unable to read you managed to waste your own time I would say.