I've been watching a ton of reviews on the f3800. This was surprisingly very well done. There was thorough testing, a detailed overview of features and limitations, and examples of edge use cases. There was a lot of effort in just production setup with the mock camp cookout. I've been trying to find real info on EV charging and you had that too! BRAVO!!!
Great video ! I am a new fan of Anker, ever since they came out with the F3800 . It is an amazing device... well engineered, powerful, adaptable, affordable, and easily expandable. LOTS of great features.
have you found a way to limit the charge when on Grid power charging 2 F3800's seems to hit 2400 watts each I wish I could cut that in half as it is a lot on my Gen to run the house and charge the F3800s when I have hit the gen disconnect switch also seems like I have to run power over 400 watts to get the smart panel to switch from F3800 to the Gen - Grid Power
It's nice to see some real life testing. I would like to know if I can charge F3800 from a gas generator during a power outrage. I will hook up the generator to a transfer switch that is connected to the main panel. Then, I will charge F3800 from a wall outlet. Do you think it will work?
From what I've been able to gather if you set a generator plug in directly into your panel with an interlock then you essentially replace the grid input. I think you need their smart panel though
I am new to this. I want to supply AC power to my RV from this unit via the RVs power cord. I realize I will need a 30amp to 50 amp adapter. My question is will this be interrupted when I charge the F3800 via a generator feeding the AC charge port?
Good video, the Anker F3800 system is decent. I have two F3800's and 6 BP3800 expansion batteries and a Home Power Panel... so I am speaking from experience. Unfortunately I would not buy again because but they essentially have no customer service. And when they do firmware upgrades, they don't know the changes in specs. And they don't ship anywhere near their promised shipping and delivery time. But as for support, each call or chat takes hours and each response it automatic and says they will reply in 2 days... even for the most basic questions. So unless you're a solar expert, don't count on ANKER for any help unless you have a ton of patience. If I could do over again, I would go with EcoFlow for their customer support
Hi! I'm so sorry you didn't have great customer service with ANKER! If you purchase through us at Signature Solar, we will be sure to give you the best customer service! :)
I bought the F3800 and like it a lot. However, it does not come with a User Manual, and the online version is minimal at best. How do you use the add on batteries? How do they integrate with the main unit? Can I power them on and off with the main turned on?
We made a short video to address your questions. Hopefully this will show you how to use the add-on batteries, how they integrate with the main unit, and that you can power them on and off with the main unit turned on. Thank you. th-cam.com/video/DGdN5AFnQps/w-d-xo.html
This power station with two 48v server rack batteries hooked up to the dc inputs would make a good solution. I would have bought one already if it was not for the 240v disabled during AC charging, and the restricted Solar inputs.
I agree, they should have made the UPS support 240v @ 25a input (same as output) so that you could really use it as an always connected home backup system. Maybe that's why they have the home power system. Is that the only way to get a proper transfer switch for this?
@@kenastl I bought an Interconnect Switch for my breaker-box. This makes my system a manual backup rather than an automatic backup battery, but is a good, cheap alternative and you can immediately gain access to all the circuits in your breaker box! You do have to watch how much load ( which breakers are turned on) when you run it this way. I switched ALL my lights to LED bulbs (which use only 9 watts) and keep my refrigerator coils clean to reduce the amount of needed power. I don’t plan on running my A/C, and only use fans in the house as needed, and I have a natural gas furnace and water heater, so my biggest loads are my 1200 watt microwave oven, my 1000 watt coffee maker, and my stovetop range elements.
Solar input is pathetic and made worse by the amps being limited if the voltage happens to drop too low for example if the sun goes behind a cloud or if a panel in a string becomes shaded. This is NOT a system to get if solar is a major input. Voltage range is too low and too narrow of a voltage window. Plus, the 240 volt outlet turning off if recharging is not good
Then can you so kindly please recommend a brand that’s worth the money I would like to know instead of wasting thousands of dollars for something that halfway is good thankyou
@@Terry17-dawg Do you actually own the F3800_ and know this from first hand knowledge? Or just shooting from the hip? …. Terry from the looks of his channel Id say the latter I’m going with 2 sets of 400w panels. Anker hit a home run I can’t imagine they dropped the ball to horrendous on the panels.
Nice unit but that was an unfair test using a laptop computer. Youi should have used a desktop computer. Once you remove the power supplied from the Anker to the laptop, you have have even used a 30 minute change over time for the computer only. Why? The laptop runs on it's internal battery so removing the power from the USB cable going to the laptop means nothing unless the battery in the computer is dead. It's the demo you created that is flawed, not the Anker F3800. Actually I'm sold on the Anker, it's your demo that's flawed. Barry
Thank you for your comment! I see how that could have been misunderstood. If you take a look around 13:14 in the video, you’ll notice our desktop computer on the right side of the screen, which was connected to our two monitors for our UPS test. The laptop you saw was only connected via the USB-C port for a later test to show the charge output, which we discuss at 13:58. You're right-if we had been testing the UPS on the laptop, the test would have been flawed. However, the switchover time and any potential glitches we were monitoring were specifically for the desktop computer and its monitors. Once the power was cut, you can see that neither the monitors nor the clock glitched. Thanks again for bringing this up!
I've been watching a ton of reviews on the f3800. This was surprisingly very well done. There was thorough testing, a detailed overview of features and limitations, and examples of edge use cases. There was a lot of effort in just production setup with the mock camp cookout. I've been trying to find real info on EV charging and you had that too! BRAVO!!!
Much appreciated! Thank you for your feedback!
Great video ! I am a new fan of Anker, ever since they came out with the F3800 . It is an amazing device... well engineered, powerful, adaptable, affordable, and easily expandable. LOTS of great features.
Wow, Kelly! You are strong! That is a lot of weight to move around and you made it look effortless. 🙂
Damn, she picked that thing up and put it on her truck!
Anker really hit the nail on the head with this one, wow.
have you found a way to limit the charge when on Grid power charging 2 F3800's seems to hit 2400 watts each I wish I could cut that in half as it is a lot on my Gen to run the house and charge the F3800s when I have hit the gen disconnect switch also seems like I have to run power over 400 watts to get the smart panel to switch from F3800 to the Gen - Grid Power
It's nice to see some real life testing. I would like to know if I can charge F3800 from a gas generator during a power outrage. I will hook up the generator to a transfer switch that is connected to the main panel. Then, I will charge F3800 from a wall outlet. Do you think it will work?
From what I've been able to gather if you set a generator plug in directly into your panel with an interlock then you essentially replace the grid input. I think you need their smart panel though
I am new to this. I want to supply AC power to my RV from this unit via the RVs power cord. I realize I will need a 30amp to 50 amp adapter. My question is will this be interrupted when I charge the F3800 via a generator feeding the AC charge port?
Good video, the Anker F3800 system is decent. I have two F3800's and 6 BP3800 expansion batteries and a Home Power Panel... so I am speaking from experience. Unfortunately I would not buy again because but they essentially have no customer service. And when they do firmware upgrades, they don't know the changes in specs. And they don't ship anywhere near their promised shipping and delivery time. But as for support, each call or chat takes hours and each response it automatic and says they will reply in 2 days... even for the most basic questions. So unless you're a solar expert, don't count on ANKER for any help unless you have a ton of patience. If I could do over again, I would go with EcoFlow for their customer support
Hi! I'm so sorry you didn't have great customer service with ANKER! If you purchase through us at Signature Solar, we will be sure to give you the best customer service! :)
I bought the F3800 and like it a lot. However, it does not come with a User Manual, and the online version is minimal at best.
How do you use the add on batteries? How do they integrate with the main unit? Can I power them on and off with the main turned on?
We made a short video to address your questions. Hopefully this will show you how to use the add-on batteries, how they integrate with the main unit, and that you can power them on and off with the main unit turned on. Thank you.
th-cam.com/video/DGdN5AFnQps/w-d-xo.html
This power station with two 48v server rack batteries hooked up to the dc inputs would make a good solution. I would have bought one already if it was not for the 240v disabled during AC charging, and the restricted Solar inputs.
I agree, they should have made the UPS support 240v @ 25a input (same as output) so that you could really use it as an always connected home backup system. Maybe that's why they have the home power system. Is that the only way to get a proper transfer switch for this?
@@kenastl
I bought an Interconnect Switch for my breaker-box. This makes my system a manual backup rather than an automatic backup battery, but is a good, cheap alternative and you can immediately gain access to all the circuits in your breaker box!
You do have to watch how much load ( which breakers are turned on) when you run it this way.
I switched ALL my lights to LED bulbs (which use only 9 watts) and keep my refrigerator coils clean to reduce the amount of needed power.
I don’t plan on running my A/C, and only use fans in the house as needed, and I have a natural gas furnace and water heater, so my biggest loads are my 1200 watt microwave oven, my 1000 watt coffee maker, and my stovetop range elements.
Great presentation. I didn't quite get the solar input? I've got 11kva solar panels. Does that mean I can plug it to charge the Anker?
No, it's a 2400w max
Hello. What is the UL listing on the home power panel?
That solar generator is really good 240V and 6000w inverter is amazing but 60V is pathetic
Nice video keep up the good work
Thank you!
Solar system and versatility has been shown to interact with our needs. Thumbs up 👍
Pass through charging and I’m in.
Solar input is pathetic and made worse by the amps being limited if the voltage happens to drop too low for example if the sun goes behind a cloud or if a panel in a string becomes shaded. This is NOT a system to get if solar is a major input. Voltage range is too low and too narrow of a voltage window. Plus, the 240 volt outlet turning off if recharging is not good
I mean 2 basic panels in series should easily maintain 32V... I agree its not ideal but this is a little dramatic.
Then can you so kindly please recommend a brand that’s worth the money I would like to know instead of wasting thousands of dollars for something that halfway is good thankyou
@@Terry17-dawg Do you actually own the F3800_ and know this from first hand knowledge? Or just shooting from the hip? …. Terry from the looks of his channel Id say the latter I’m going with 2 sets of 400w panels. Anker hit a home run I can’t imagine they dropped the ball to horrendous on the panels.
@@jeffj_39is reading hard? Or do you just like putting words in people’s mouths? She asked a question
Nice!
Nice unit but that was an unfair test using a laptop computer. Youi should have used a desktop computer. Once you remove the power supplied from the Anker to the laptop, you have have even used a 30 minute change over time for the computer only. Why? The laptop runs on it's internal battery so removing the power from the USB cable going to the laptop means nothing unless the battery in the computer is dead.
It's the demo you created that is flawed, not the Anker F3800. Actually I'm sold on the Anker, it's your demo that's flawed.
Barry
Thank you for your comment! I see how that could have been misunderstood. If you take a look around 13:14 in the video, you’ll notice our desktop computer on the right side of the screen, which was connected to our two monitors for our UPS test. The laptop you saw was only connected via the USB-C port for a later test to show the charge output, which we discuss at 13:58. You're right-if we had been testing the UPS on the laptop, the test would have been flawed. However, the switchover time and any potential glitches we were monitoring were specifically for the desktop computer and its monitors. Once the power was cut, you can see that neither the monitors nor the clock glitched. Thanks again for bringing this up!