Currently took mine apart! One small tip cuz my carbs where overflowing. Make sure to take off the floats and clean/replace the ‘float needle’ and the little half round filter underneath. Mine where full with dirt. Great video btw made taking the carbs off and back on much easier for me!
SUCH A BEAUTIFUUL BIKE last week i had to choose betwwe 1 of theese and 88 zx10 but the zx10 won cause it has more potencial to upgrade and the engine is lot more sophisticated water cooled ...and very important the rear wheel is not upgradable in the gsx in the kawa no problem ..but they both looks beautiful to me ...both dream bikes incredibly fast like today bike you need a 750 at least today to be faster than zx10 or this one
Have you looked up a manual? Also while disassembling make sure you count how far they are out. What I do is take pictures of each screw and screw everything handtight, make sure you count how many turns they have to get out of that position. Don’t know if it makes any sense what I’m trying to say but there’s many videos out there telling you how to adjust carbs. A manual helps as well telling you how many turns each screw should need for standard settings!
normally is 2 and a half but there is not a rule for that thats just a mark to start the regulaton and thats is the reason they have regulators screws ,,after that you need to know how to regulate a carb but if you dont know that cause you are not a mechanic just go to a mechanic ..understand how it works man?😀
Золотые у тебя руки
I recently purchased one with 8,000 miles on it. Cleaning everything and getting new tires.
Just bought my gsx1100f! Had a fun ride with it. I love the edit man. Goodjob 😁
gute maschine. mir gefehlt.
Currently took mine apart! One small tip cuz my carbs where overflowing. Make sure to take off the floats and clean/replace the ‘float needle’ and the little half round filter underneath. Mine where full with dirt. Great video btw made taking the carbs off and back on much easier for me!
thanks sa advice. I have changed needles before. misconfigured floats. in this video just corrected my shortcomings
SUCH A BEAUTIFUUL BIKE last week i had to choose betwwe 1 of theese and 88 zx10 but the zx10 won cause it has more potencial to upgrade and the engine is lot more sophisticated water cooled ...and very important the rear wheel is not upgradable in the gsx in the kawa no problem ..but they both looks beautiful to me ...both dream bikes incredibly fast like today bike you need a 750 at least today to be faster than zx10 or this one
Hello, What is the normal position of the fuel tap?
"Vergaser einstellen" Titel verfehlt
kann schon alles in video sehen was brauchen.
I recently did the jets and floats in mine and now it wont start
Be very careful that you don't miss to install the vacum hose
there are many moments where it is powerful to make a mistake. from diameter to screw turn
Suzuki Power! Сузуки Сила!
I love katana, and just opened my carb and cleaned it but I dont know how many turns should I turn jets and screws🥲☹️
Have you looked up a manual? Also while disassembling make sure you count how far they are out. What I do is take pictures of each screw and screw everything handtight, make sure you count how many turns they have to get out of that position. Don’t know if it makes any sense what I’m trying to say but there’s many videos out there telling you how to adjust carbs. A manual helps as well telling you how many turns each screw should need for standard settings!
@@Stealyourtone Thanks a lot❤️🙏
standard setting is 2.5 turns to air.
@@motoauto82 thanks a lot🙏
normally is 2 and a half but there is not a rule for that thats just a mark to start the regulaton and thats is the reason they have regulators screws ,,after that you need to know how to regulate a carb but if you dont know that cause you are not a mechanic just go to a mechanic ..understand how it works man?😀