#13 How To Create Custom Symbols in KiCad 7.0 With KLC |

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ธ.ค. 2024

ความคิดเห็น • 35

  • @FHollis-gw4cc
    @FHollis-gw4cc ปีที่แล้ว +10

    I have taken a few minutes to say how much I appreciated the time and effort you have spent creating these videos.The fact that you made them quite short and made separate videos for each section made it easy to go back to a particular area again. You explained each step of the process with enough detail to be completed without problems. You used an example that contained more than just a battery, a resistor and an LED. All in all, an extremely useful series!
    This was my first attempt at creating a PCB board and KiCad seemed to be the most popular software available. So I installed it and started creating my board. How hard could it be, right? Well, it isn't! But, the process pretty much requires the process be done in a specific order. Which, of course, I didn't follow, and made a real mess!
    I decided to start over and followed your videos, one at a time, and was surprised at how quickly and smoothly it went!
    You have done a very, very professional job and I thank you from the bottom of my heart for doing so.

    • @pcbcupid
      @pcbcupid  ปีที่แล้ว +1

      Glad the video helpful! We really appreciate the effort you put on this beautiful comment, we'll always cherish this and make more video series just like this!

    • @sumanpattanaik7469
      @sumanpattanaik7469 4 หลายเดือนก่อน

      agree short and precise and comprehensible

  • @arjungupta-inventor-iaq
    @arjungupta-inventor-iaq ปีที่แล้ว +3

    Great job! Thanks for posting these videos. Very clear and concise.

    • @pcbcupid
      @pcbcupid  ปีที่แล้ว

      Glad it was helpful!

  • @lucvandoorne3050
    @lucvandoorne3050 ปีที่แล้ว +2

    Nice presentations. I am not native englisch speaking and I find the video's very understanding and well presented. Thank you and looking forward for the next ! ! !
    Grts,
    Luc

    • @pcbcupid
      @pcbcupid  ปีที่แล้ว +1

      Thank you! 😃 It' means a lot.

  • @justinreddick5876
    @justinreddick5876 4 หลายเดือนก่อน

    How did you rotate the symbol on a 45? I can't seem to find an angle option for symbols in preferences.

  • @kwacz
    @kwacz 11 หลายเดือนก่อน +1

    everytime i make a schematic i have to do this. even basic symbols like a 4 pole switch or even a simple transistor symbol is missing. I made a single pole switch symbol because theirs was stupid. I don't remember having this problem with the older version. and even the search in the newest version is stupid. I can no longer search for a resistor. I have to say something stupid to get it to come up and I don't even remember what that even was.
    So aggravating that simple generic symbols are either drawn dumb or most likely not even there. But they have a bunch of exotic ones for stuff most hobbyist never use.

  • @shshakibhasan3338
    @shshakibhasan3338 ปีที่แล้ว +1

    Great.....
    How to selected any SMD footprint..?

    • @pcbcupid
      @pcbcupid  ปีที่แล้ว +1

      We'll be discussing the topic in upcoming videos.

  • @ELECTRONICS_TIMES
    @ELECTRONICS_TIMES ปีที่แล้ว +2

    Nice presentation, sir.
    i am getting errors while simulating relaxation oscillator using ujt. so, can you please help me to resolve the problem.
    "Errors during netlist generation; simulation aborted.
    Error reading simulation model from symbol 'U1': Failed to read simulation model from fields."

    • @pcbcupid
      @pcbcupid  ปีที่แล้ว

      Please check if your symbol supports simulation. Not all the symbol in kiCad support simulation.

  • @padmalayarawal3091
    @padmalayarawal3091 ปีที่แล้ว +1

    Loved the explanation

    • @pcbcupid
      @pcbcupid  ปีที่แล้ว

      Thank you!!

  • @ColinWatters
    @ColinWatters ปีที่แล้ว +1

    First time using KiCad but have used other CAD like F360 to make PCB... In KiCad when I select File - > New Library it doesn't give me the Global/Project Pop-up. Instead it opens KiCad > 7.0 > symbols which appears empty and suggests a file name New_Library.kicad_sym. If I change that to Amplifier_Audio.kicad_sym it complains it already exists. Confusing. Edit: Ah ok first you have to create a project, Then it offers the pop-up.

    • @pcbcupid
      @pcbcupid  ปีที่แล้ว

      Glad you figured it out!

  • @madhavbss307
    @madhavbss307 10 หลายเดือนก่อน +1

    Hi, How did you write RESET bar as pin name?

    • @pcbcupid
      @pcbcupid  10 หลายเดือนก่อน +1

      You can do this to add the bar above the name : ~{NAME HERE}

  • @meenakshigopi9614
    @meenakshigopi9614 ปีที่แล้ว +1

    Hi
    How to overline the text in pin name while creating customized symbol

    • @pcbcupid
      @pcbcupid  ปีที่แล้ว

      add a prefix '~' before and place the text within parenthesis.
      Ex : ~(RST) , ~(EN)

    • @barani-y6n
      @barani-y6n ปีที่แล้ว

      ​@@pcbcupid it's not working...
      I m not getting a upperline. It shows ~(RESET) like this only

    • @pcbcupid
      @pcbcupid  ปีที่แล้ว

      @@barani-y6n Try the new convention ~{RST}, ~{EN}

  • @SunLake-pr1di
    @SunLake-pr1di 6 หลายเดือนก่อน +2

    Great 👍

    • @pcbcupid
      @pcbcupid  5 หลายเดือนก่อน

      Thank you!

  • @ZenderStuzer
    @ZenderStuzer ปีที่แล้ว +1

    KiCad is just a toy without BOM management tools, not a professional software. When designing, I don't want to have symbol or footprint libraries. I want to have a component library. Is there any simple way to have that? Like a file where you can assign symbol and a footprint for the component along with other parameters?

    • @pcbcupid
      @pcbcupid  ปีที่แล้ว +1

      Yes, there are ways to do it. But currently, it's a workaround and not a real solution.
      1. Setup a SQL database and manage your components on it (Read the official documentation)
      2. Create a custom footprint association file. (We have briefly talked about it in this video : th-cam.com/video/JMa9q4YhRDk/w-d-xo.html )

  • @OrTB
    @OrTB ปีที่แล้ว +1

    but why it only shows the designator? I want it to show the symbol name as well, do you know how to do that?

    • @pcbcupid
      @pcbcupid  ปีที่แล้ว

      By default only the reference designator is set for custom symbols.
      To add value or name you can use the "Library symbol properties"
      right click on the document area -> select symbol properties
      On the pop up window you can either add more field for the name or you can just use the value property.

  • @nyder1331
    @nyder1331 ปีที่แล้ว +1

    Thanks for this tutorial it helped me a lot

    • @pcbcupid
      @pcbcupid  ปีที่แล้ว

      Glad it is helpful!

  • @yahmk3978
    @yahmk3978 ปีที่แล้ว +1

    Thank you!

    • @pcbcupid
      @pcbcupid  ปีที่แล้ว

      Glad it's helpful!

  • @ketanmorajker
    @ketanmorajker ปีที่แล้ว +1

    👌🏻