Chevy Sonic M.A.F. (Mass Air Flow) Sensor

แชร์
ฝัง
  • เผยแพร่เมื่อ 11 ม.ค. 2025

ความคิดเห็น • 20

  • @waterninten
    @waterninten หลายเดือนก่อน +2

    Thanks so much on this. im going to do some work on my 2014 and yhis video is very helpful. No fluff and a recommendation. 10/10

  • @nandolegoshorts
    @nandolegoshorts 3 หลายเดือนก่อน +2

    i recommend having a flat head screwdriver to be able to pry out the sensor, the older the sensor the harder it is to pull out 0:47

  • @YASAJTV
    @YASAJTV ปีที่แล้ว +4

    Another underrated channel.

  • @cumbiaconsabordeorquesta3353
    @cumbiaconsabordeorquesta3353 6 หลายเดือนก่อน +1

    Thanks for your video, it helped me. My car didn't want to work well. I put the scanner on it. I watched your video and bought the sensor (maf). Thank you.

    • @DavidNaritaYT
      @DavidNaritaYT  6 หลายเดือนก่อน +1

      Awesome! You're welcome!

  • @jwest88
    @jwest88 10 หลายเดือนก่อน +1

    Thanks for this. Was just gifted a sonic 2013 with 105k miles. My aunt did say once when driving in the summer heat for 2 or 3 hours straight it had an idle issue where she had to keep her foot on the gas while in neutral.
    So far what I've heard is it could be a dirty throttle body or maf sensor. This looks like a very easy job so may just order a new one if they aren't too pricey.
    Thanks.
    I do have to say I'm not a fan of all the torx screws on the sonic. Guess I'll have to invest in a torx set, may have some with my drill but don't want to have to use a drill every time I work on my car.

    • @DavidNaritaYT
      @DavidNaritaYT  10 หลายเดือนก่อน

      You're welcome 🙏

  • @scopriorosa
    @scopriorosa 21 วันที่ผ่านมา +1

    My 2020 Chevy sonic RS doesn’t have the red clip on the sensor is it bad?

    • @DavidNaritaYT
      @DavidNaritaYT  21 วันที่ผ่านมา

      As long as the plug clips not broken its fine.

  • @marcusgipson1012
    @marcusgipson1012 ปีที่แล้ว +1

    Great! Strait to the point

  • @scopriorosa
    @scopriorosa 20 วันที่ผ่านมา

    I took my Chevy Cruze 2017 to get new brakes. Then had a knocking front right every time I brake. They suggested wheel bearing and cv axles. The noise was still there so the put my car back together with my original parts. They told me it’s the transmission. Can changing the fluid save my transmission?

    • @DavidNaritaYT
      @DavidNaritaYT  20 วันที่ผ่านมา

      Not if it's knocking

    • @scopriorosa
      @scopriorosa 20 วันที่ผ่านมา

      Thank you

    • @DavidNaritaYT
      @DavidNaritaYT  20 วันที่ผ่านมา

      Most likely your cv axle is damaged though. Does it knock when you make a hard turn?

  • @tabbitha6374
    @tabbitha6374 10 หลายเดือนก่อน +1

    Couldn't get mine off the plug, any idea what I should try? 😂

    • @DavidNaritaYT
      @DavidNaritaYT  10 หลายเดือนก่อน +1

      It has a little clip you need to pop out before you can push the tab down to release the plug

  • @tavarisharrington4015
    @tavarisharrington4015 วันที่ผ่านมา

    🤫

  • @AspectDesigns-o2y
    @AspectDesigns-o2y 6 หลายเดือนก่อน

    I replaced my sensor but now my car struggles to start when its cold.

    • @DavidNaritaYT
      @DavidNaritaYT  6 หลายเดือนก่อน +1

      You need a computer scanner to see if there are any error codes stored on your computer. Why did you replace the sensor? Was it a guess?