These are all beautiful. Can I suggest you scrape your clay from the middle towards you then turn and pull toward you again instead of pushing away. I’ve found that gives me a good clean edge. Keep up the good work and good luck with your channel 😊
Totes are such fun to decorate! I finished a bunny plaque this morning. I painted the castings with colors then applied brown wax. My first try with colored paint. It turned out great. You could do the same. I could see the ladybugs just pop off the design! I like how you aged the tim holtz tissue. Your tote turned out great! I also love your IOD transfers on your pillows.
Thank you! I would love to see your bunny plaque, if you don’t mind sharing it! I’m currently working on a piece that I will be painting the castings with colors too, wish me luck 😊
Hello Linda, just found your channel and really enjoying all of your creativity, and talents. I've found that using an emery board (a firm one that is used for acrylic nail) helps to get into the small hard to get to area.
Have you tried the IOD Air Dry Clay in your moulds? I used to use DAS Clay and found it to be a little too pliable if that makes sense. It's a great Clay but when it comes to tiny details, I just could cast those moulds without breaking off a part of the details. The IOD Clay holds it's form much better. I do not ever have any issues with my moulds with fine details. The IOD Clay practically falls out of the mould. Just thought I would share 😁❤️
Thanks for your interest! I used a hiipoo cordless glue gun from Amazon but it is no longer on their website, as far as I can tell. Sorry I couldn’t be more helpful.
That black wax on the tote absolutely was perfect with the decoupage paper. 😍
Thank you!
Linda, you are so funny rabbit fur. I loved all your stuff.
Thank you so much!
Thanks for this aesthetik DIY. I did the dragonfly with a stencil and structurpaste. It works also well.
Greetings from Germany 😊
Thank you! I enjoy using texture paste as well, I’m sure that turned out great!
love all of your diys
Thank you!
Put your mold in the frig for a while and the small areas will come out attached
Great advice! Thank you, I’ll try that!
Very very nice!
Thank you!
I just found your channel...WOW! Love your creativity. Can't wait to have time to binge watch your other videos. Subscribed!!!
Thank you so much, I hope you continue to enjoy it!
Stunning 💜
Thank you!
Gave me so much inspiration. Love them all.
I’m so glad you got inspired, thank you!
learned so much-thank u!
You’re welcome & thank you!
They have 10 minute resin that’s amazing with the IOD moulds.
I am looking forward to getting the 10 min resin, I love having an alternative to clay. Thanks!
These are all beautiful. Can I suggest you scrape your clay from the middle towards you then turn and pull toward you again instead of pushing away. I’ve found that gives me a good clean edge. Keep up the good work and good luck with your channel 😊
Thank you! I love helpful tips!
Totes are such fun to decorate! I finished a bunny plaque this morning. I painted the castings with colors then applied brown wax. My first try with colored paint. It turned out great. You could do the same. I could see the ladybugs just pop off the design! I like how you aged the tim holtz tissue. Your tote turned out great! I also love your IOD transfers on your pillows.
Thank you! I would love to see your bunny plaque, if you don’t mind sharing it!
I’m currently working on a piece that I will be painting the castings with colors too, wish me luck 😊
@Linda Diane Designs I would share but don't know where.
Hello Linda, just found your channel and really enjoying all of your creativity, and talents. I've found that using an emery board (a firm one that is used for acrylic nail) helps to get into the small hard to get to area.
Thank you!
Have you tried the IOD Air Dry Clay in your moulds? I used to use DAS Clay and found it to be a little too pliable if that makes sense. It's a great Clay but when it comes to tiny details, I just could cast those moulds without breaking off a part of the details. The IOD Clay holds it's form much better. I do not ever have any issues with my moulds with fine details. The IOD Clay practically falls out of the mould. Just thought I would share 😁❤️
Thanks for the info! I haven’t tried the IOD clay, but I will now!
I love your little tote
Thank you!
You can put the mould in freezer for around 10 - 15 min. And they pop right out!!!
New sub. Love your video.
Thank you!
New subscriber.
Thank you, so glad to have you!
Throw it in the freezer and then take them out of the moldy they thaw and you can still bend them
Love these, can't go wrong with IOD, prima or Tim Holtz!! (New sunscriber!!!)
Thank you so much!
Really enjoyed your creativity glad I found your Chanel!! Will go and watch your previous videos.
Thank you, I’m glad you enjoyed it!
Beautiful
Thank you!
Hi, I am interested to know what brand and model your hot glue gun is, please, and a link if you have it. Thank you.
Thanks for your interest! I used a hiipoo cordless glue gun from Amazon but it is no longer on their website, as far as I can tell. Sorry I couldn’t be more helpful.
Where did you get your glue gun from?
Amazon, but the last time I checked they didn’t have it.