Its a normal bottle jack. I use one all the time for my small cars. Even some mid size cars. This is something I would build to make it easier to do tire/brake changes. Even my little bottle jack is better than those stamped steel shits that come in the trunk of most cars.
MUY BUENA IDEA GRACIAS POR COMPARTIR TUS IDEAS. TOMARE TUS IDEAS Y LAS PLASMARE EN MI PROYECTO DE GATO MODIFICADO PORQUE AYUDA BASTANTE Y SOY CAMIONERO O TRAILERO EN VENEZUELA. SALUDOS DESDE VENEZUELA.
Lo hubieras probado levantando un peso de la capacidad del gato a ver si no puja el taladro, pues la palanca que ocupa desarrolla una fuerza que quizás no la tenga el taladro.
@@Afthanom I used my impact gun and a stamped steel jack with the socket for the lug wrench to lift a car. Lifted all the way off the ground. Before you ask it was a 2008 impala lt and I was doing rear brakes. If my hand can move a handle to lift a car then an impact gun that can break studs will be able to do the same. Also I used a jack stand as well. I'm dumb. Not stupid.
The concept is good but you haven't demonstrated it doing actual work like lifting the corner of a car off the ground. Somehow, I doubt it will be able to handle it. Either the drill will stall or the mechanism will fail. BTW I am a machine designer with over 30 years of experience.
Good idea but it needs a lot of refinement. We didn't see it lift a vehicle. I think the pumping rate would be far too fast for the internal valves and hydraulic fluid to handle. It would overheat and fail under load.
excelente trabalho vou copiar a ideia e usar nos meus macacos hidráulicos, você poderia colocar as medidas das peças usadas para essa construção. Esse projeto ajuda muito. muito obrigado!! 잘했습니다 아이디어를 복사하여 유압 잭에 사용할 것입니다. 이 구성에 사용된 부품의 치수를 입력할 수 있습니다. 이 프로젝트는 많은 도움이 됩니다. 매우 감사합니다!!
Yes , it WILL work under load , lift a car etc. I took a truck bottle jack and cut off the end of the crank that fits into the receptacle on the jack, chucked it in a drill motor and it works just fine. The person on the video has a good mechanical mind and I appreciate that , but it’s much easier getting a pickup truck jack to start with.
Buen día el diseño se ve muy práctico. Pero los materiales no son los indicados pues no muestran el ensayo levantando carga de 1 ton por lo menos pues si con la palanca manual hay un esfuerzo de uso al. Momento de hacerle carga al mecanismo se romperá o deformara
@@PopaAlexandru. Закон физики , что бы поднять ,что то тяжёлое , нужен рычаг!!! Кто ни разу не пользовался домкратом , будут восхищаться этим творением)) Ха Ха. The law of physics, to raise something heavy, you need a lever !!! Those who have never used a jack will admire this creation)) 🤣🤦♂️🤦♂️
@@mostodont The hydraulic jacks are based on the difference of surfaces. Of course, for heavy weights it also needs some strength. Basically I liften a car with a scissor jack operated by a drill with accumulators ... after 3 uses the jack has failed so mechanical resistance is necessary. Welded bearing and washer is an idea of strength? The idea is ok but the transposition in practice cancels it out.
não é o esquema da furadeira que levanta o carro!!! é o macaco que levanta!! vc tá achando que é a furadeira que levanta o carro? kkkkk esse sistema só faz ser mais rápido o bombeamento!
@@RushFuture у меня редуктор от старой цепной электропилы парма гдето завалялся надо будет попробовать у него передаточное поменьше будет чем от болгарки только вот когда время для этого будет это ещё тот вопрос 😐
não é o esquema da furadeira que levanta o carro!!! é o macaco que levanta!! vc tá achando que é a furadeira que levanta o carro? kkkkk esse sistema só faz ser mais rápido o bombeamento!!
Nothing says from prototype to finished design like a 99 cent can of spray paint. I've came to the conclusion that English isn't the primary language for most of these videos. So I'll let you guys in on some valuable information. Amazing and genius does not mean the same thing as shitty, impractical, dangerous or poorly thought out
Lembranças de guando eu trabalhava ### fui feliz demais como mecânico # projetista ( 41anos)
Muy guenas tus ideas te felicito
Gracias amigo esta genial tu intento y muy práctico
А выложи видео с работой домкрата при подымании груза тонн 5 и тогда посмотрим как эта система будет работать...!!!
You have to show us the practicality and effectiveness of the jack under load.
Its a normal bottle jack. I use one all the time for my small cars. Even some mid size cars. This is something I would build to make it easier to do tire/brake changes. Even my little bottle jack is better than those stamped steel shits that come in the trunk of most cars.
It's like a Choo - Choo train wheel drive. I like it.
Very good
Congratulations
아이디어는 칭찬합니다.
그러나 중량급 예를들어 컨테이너 밑에다받치고 작동시 저렇게 쉽게 떠질까요?
안될확률이 100%입니다.
아주무거울땐 파이프로 꽂고 힘줘서떠야 할듯요. ㅎㅎ
무시하는건 절때 아닙니다.
오해 마시고 제경험으론 그랬다는겁니다.
어쨋든 기술은 좋습니다.
보강기술이 필요할듯 해서요.
감사합니다.
저도 그 생각 했네요. ㅎㅎ
MUY BUENA IDEA GRACIAS POR COMPARTIR TUS IDEAS. TOMARE TUS IDEAS Y LAS PLASMARE EN MI PROYECTO DE GATO MODIFICADO PORQUE AYUDA BASTANTE Y SOY CAMIONERO O TRAILERO EN VENEZUELA. SALUDOS DESDE VENEZUELA.
Lo hubieras probado levantando un peso de la capacidad del gato a ver si no puja el taladro, pues la palanca que ocupa desarrolla una fuerza que quizás no la tenga el taladro.
Sama hobinya brow sy suka sekali dgn mekanik.
Wow really amazing idea
I doubt it will still operate when under a load.
Under light load yes under heavy load no .
@@Afthanom I used my impact gun and a stamped steel jack with the socket for the lug wrench to lift a car. Lifted all the way off the ground. Before you ask it was a 2008 impala lt and I was doing rear brakes. If my hand can move a handle to lift a car then an impact gun that can break studs will be able to do the same. Also I used a jack stand as well. I'm dumb. Not stupid.
Muito bom seus vidius valeo amigo legal! 👍
But nonetheless, is a great idea, I think using the proper gearing reduction it would work.
The concept is good but you haven't demonstrated it doing actual work like lifting the corner of a car off the ground. Somehow, I doubt it will be able to handle it. Either the drill will stall or the mechanism will fail. BTW I am a machine designer with over 30 years of experience.
Es x la velocidad verdaad???
캬!^^
사장님 용접기 추천!
사용하는게 요즘들어서 잘 안되는건지..
엄청 달라 붙음..
awesome bro...love from India!
Idéia excelente trabalho parabéns 👏👏👏🇧🇷
8:05 JAJAJA SALUDOS BUEN TRABAJO
One word genius thank you for sharing
짱입니다
저도한번 도전해봅니다
좋은 아이디어 감사합니다
I haven’t seen anything like this,I think you need to patent it.And any other ideas you have,you’re a smart man,I’ve seen your projects before.👍
Good idea but it needs a lot of refinement. We didn't see it lift a vehicle. I think the pumping rate would be far too fast for the internal valves and hydraulic fluid to handle. It would overheat and fail under load.
Sangat2 Kreatip Anda , Trima Kasih atas Ilmu nya Suxes untuk Anda
Great job thank you very much
good idea 👍
Good idea but I don't think you have any torque like this. Lever is better, more torquy. So it´s no good for heavy load.
excelente trabalho vou copiar a ideia e usar nos meus macacos hidráulicos, você poderia colocar as medidas das peças usadas para essa construção. Esse projeto ajuda muito. muito obrigado!! 잘했습니다 아이디어를 복사하여 유압 잭에 사용할 것입니다. 이 구성에 사용된 부품의 치수를 입력할 수 있습니다. 이 프로젝트는 많은 도움이 됩니다. 매우 감사합니다!!
Полная хрень, шуриком машину не поднять, в таком случае нужен редуктор. Овчинка выделки не стоит
Под нагрузкой не показано ,шняга!
under load please, nice design anyway
Yes , it WILL work under load , lift a car etc. I took a truck bottle jack and cut off the end of the crank that fits into the receptacle on the jack, chucked it in a drill motor and it works just fine. The person on the video has a good mechanical mind and I appreciate that , but it’s much easier getting a pickup truck jack to start with.
Que material se tiene que usar para hacerlo me podria decir?
Good 👍👍👍👍👍👍👍
아이디어는 기발한데 우리나라 쟈키들 수명이 너무 짧아요 어떤건 몇번만 써도 오일 질질새고 올라 가지도 않고 쟈키 자체를 수명이 오래가게 만들었으면 하는 바램
very nice idea, I'm going to make a similar one
Cuando quiera levantar un carro, no tiene la suficiente fuerza.
Marcelo R Lopez el taladro es un power tool es capaz de hacerlo subir sin problema
자키 위에 무게가 실리면 과연 드릴 힘으로 자키가 올라갈가
I like it but I dont use one enough for all that work
Buen día el diseño se ve muy práctico. Pero los materiales no son los indicados pues no muestran el ensayo levantando carga de 1 ton por lo menos pues si con la palanca manual hay un esfuerzo de uso al. Momento de hacerle carga al mecanismo se romperá o deformara
Show de bola
🤔Interesante uso del papel aluminio! 👍
Te ganastes un nuevo subcriptor
Saludos desde Sacramento California 👋
I like it
Very intelligent man extremely talented man good job
정말 굿이내요.. 한개 제작 주문 드려도 될까요?
Very nice I’m going to make a similar one
When do you use it ?.
어찌끄나 When you need to run the boom up after storage of an engine crane.I don’t expect it would hold up to heavy lifting.
На холостую конечно покрутит а груз поднять...поплетёшся в гараж за старой доброй монтировкой
Привет скинь электроды и марку сварочного если не лень рожиг просто огоньский!!!
На мма
선생님=동영상 잘보았습니다 구독과 좋아요 알람까지 꾹꾹 누림^*^...
No me parece rentable más cuesta el taladro, mano de obra para el dispositivo q el uso q se le puede dar
👍 . 그리고 유압쟉기로 베어링 빼는거로 만드는 생각해봤음.
또한 일반 쟉기로 밭솥 야외 거치대나 통구이로 만들어 보세요.
흐르는 물에서 자동회전 바베큐 통구이도 만들어 보시구요.
새해복많이 받으시고요
올해첯작품이네요
올해 대박나시고 가네가편안한 경자년 되세요.
Dobre to by było gdyby ciężaru nie było tak to lipa to osobuwka to z bieda ale pomysł dobry
Бесполезно, но интересно!))
Namely? Please develop.
@@PopaAlexandru. Закон физики , что бы поднять ,что то тяжёлое , нужен рычаг!!! Кто ни разу не пользовался домкратом , будут восхищаться этим творением)) Ха Ха.
The law of physics, to raise something heavy, you need a lever !!! Those who have never used a jack will admire this creation)) 🤣🤦♂️🤦♂️
@@mostodont The hydraulic jacks are based on the difference of surfaces.
Of course, for heavy weights it also needs some strength. Basically I liften a car with a scissor jack operated by a drill with accumulators ... after 3 uses the jack has failed so mechanical resistance is necessary.
Welded bearing and washer is an idea of strength?
The idea is ok but the transposition in practice cancels it out.
Мозгоебка это изделие называется :-)
Pregunto: ¿no es peligroso someter ese equipo de levante a hacerlo a una velocidad varias veces mayor que la que le definió el fabricante?
Yo pregunto, porque no mostras con peso, seguro el taladro se frena
Нормально!только зачем?
А как под нагрузкой шуруповерт не возьмет
우와~~~ 정말 장인이십니다.. ㅎ
새해 복많이 받으십시요~
Muito bom
Gostaria de ver levantando o carro
não é o esquema da furadeira que levanta o carro!!! é o macaco que levanta!! vc tá achando que é a furadeira que levanta o carro? kkkkk esse sistema só faz ser mais rápido o bombeamento!
굿 아이디어 내요.. 사용 자재 에 대한 설명좀 부탁드려요.. 저도 만들어 볼려고요
Под полной нагрузкой НЕ будет работать !!! Даже трубчатая родная ручка от домкрата гнётся !
Yes your right ! Under load it won't work, that's why he didn't show it lifting something heavy .
Поддержу, через редуктор надо, от горелой болгарки, например. Но тогда скорость подъёма будет такая, что лучше уж рычагом качнуть.
@@RushFuture у меня редуктор от старой цепной электропилы парма гдето завалялся надо будет попробовать у него передаточное поменьше будет чем от болгарки только вот когда время для этого будет это ещё тот вопрос 😐
Конечно хорошо, но в пути ещо и Шурика с собой таскать,
대형자키로 유압도끼 한번 만들어보고
올려보세요! 대박 날겁니다!
기대합니다! 아니 부탁드립니다!
꼭꼭 ~~~
참 아이디어가 기발합니다
전동드라이버고정대도 만들어야 겠네요
Birde krikoyu yükteyken yapıda görelim saralı matkabın gücü yetiyormu
Thanks sir good
Tiene que demostrar la prueba levantando un camion ahi le creo que si funciona porque conforme va lebantando el peso requiere mas fierza
muy buen invento
하중받으면 지렛대 껴야 하더라도 하중 받기 전까지 빠르게 올릴 수 있는게 장점 같네요 재미있는 영상 잘 봤습니다 임팩으로 돌리는거니 가벼운 거는 호로록 올라 가겠네요
works awesome for dump bed
in a press you think it can work?
A alavanca e suas muitas utilidades, basta ser criativo.
와
이것 사고싶어요
4개 사서 트럭캐퍼에사용하면대박날것
Sem peso levanta mesmo,até um motor a pilha consegue
Coloca para levantar um carro
não é o esquema da furadeira que levanta o carro!!! é o macaco que levanta!! vc tá achando que é a furadeira que levanta o carro? kkkkk esse sistema só faz ser mais rápido o bombeamento!!
La cosa seria probarlo con carga
If you need a drill machine to pump up the hydraulic jack then there isn't much left to say.
Nothing says from prototype to finished design like a 99 cent can of spray paint. I've came to the conclusion that English isn't the primary language for most of these videos. So I'll let you guys in on some valuable information. Amazing and genius does not mean the same thing as shitty, impractical, dangerous or poorly thought out
무게 실렸을때도 잘 돌아 가나요?? 되면 진짜 대박인데..
👍👍👍
Why wasn’t it tested with a load? No one uses a jack for show.
헐 이게 모에요? 자키인가요?
Вы не показали как машину подняли
Very simple and very clever even though it's the crudest form of workmanship I've ever seen.
놀이감 취미하시기에는 재주가 많으신 분이네요..! 한가지특기분야 깊게 하시면 장인이 될듯합니다.
몇 킬로를 들어 올릴 수 있습니까?
Sem carga parece funcionar bem, será que aguenta levantar peso ?
발상은 아주 기발하지만
무게가 있을 시 동력이 가능할지
그거 안되니깐 동영상 짜른거 같음 ㅎㅎㅎㅎㅎ 드릴을 빼고 손으로 돌려야 함..ㅎㅎㅎ
장작 패는 유압도끼를 만들어 보면 좋겠습니다.
🌺🌺👍👍🌺👍👍👍👍👍
sin miedo chulada
doubt very much it would work under any kind of load, like jacking a car up if your too lazy to pull the lever!!
Need to show us that the new tool works under load
Отлично! Fine!!
아이고 이과정은 잘못된게 맞는데 유압 힘은 지렛대 역활 때문에 힘이세여 집니다 짧은 동작으로는 힘이 세여질수가 없습니다 ㅋ
감속기어를 사용하면 속도는 늦어도 하중 압력을 견딜 수 있을 것 같아요.^^
오 훌룡하네요 잘보고가요
🤣🤣🤣🤣🤣
Бесполезная штука. При нагрузке грош цена. ?
What kind jack is that.i never see it before.please tell me
Its a bottle Jack jack
After a few times, the screw breaks
სირიკო ტვირთი აწიე და ვნახავთ მერე როგორ იმარიაჟებ😂🤣
Que tipo de gata es, que levanta doble pistón, cómo se llama