Load − The load instruction is used to transfer data from the memory to a processor register, which is usually an accumulator. Move − The move instruction transfers data from processor register to memory or memory to processor register or between processor registers itself.
NICE explanation Sir if possible add videos on all previous year gate question with solution subjectwise . IF you did it then you will be first on youtube who do this . And your views will be miilions.
Instructions can vary based on mode of addressing. Various modes of addressing:- 1) 0 Mode Addressing 2) 1 Mode Addressing 3) 2 Mode Addressing 4) Immediate Mode Addressing
Load − The load instruction is used to transfer data from the memory to a processor register, which is usually an accumulator. Move − The move instruction transfers data from processor register to memory or memory to processor register or between processor registers itself.
Sir ye instructions ld push mov ye binary me kaise convert ho jaate hai or kaise inko physically convert kiya hoga ...low level machine code tk jaake explain kren sir if u can .thnks
The difference between MOVE and LOAD is when we use Move function, the data will copied from one address to another and on the other hand when we use Load function the data is moved not copied
Hello sir, All computer organization videos are sufficient for kvs or DSSSB pgt computer science exam....? Or is there any need to read in book as well...? Please reply sir.. I am waiting for your soonest response..... thanks in advance
NICE explanation Sir if possible add videos on all previous year gate question with solution subjectwise . IF you did it then you will be first on youtube who do this . And your views will be miilions.
NICE explanation Sir if possible add videos on all previous year gate question with solution subjectwise . IF you did it then you will be first on youtube who do this . And your views will be miilions.
Kitni pyar se aap thank u bolke chale jate h...or 99 percent to like share subscribe hi bolte h aadhi video me...u r excellent
Is it praising or trolling?
@@AnuragRawat01read it again
Unn sb youtubers ka Hak h vese ye sb mng na
Load − The load instruction is used to transfer data from the memory to a processor register, which is usually an accumulator.
Move − The move instruction transfers data from processor register to memory or memory to processor register or between processor registers itself.
Thank u sir
If question practice also add for the topics than these lectures will b more than enough .
😃
Beautiful work done 😊👍
awesome lecture, Thank you so much sir
Very amazing method sir ❤️❤️
Gurujee shandar jabardast zindabaad
NICE explanation
Sir if possible add videos on all previous year gate question with solution subjectwise .
IF you did it then you will be first on youtube who do this .
And your views will be miilions.
To the point explanation. Thank you sir.
Right now watching your shift instructions. Lecture 11.
Fnatic Ftw #AlwaysFnatic❤️❤️❤️❤️❤️❤️❤️
Nice master ji
Thankuuuuuuuuuuu sooooo much sir ji 🙏🏻🙏🏻🙏🏻🙏🏻
what is the difference between MOV and LD? As per the explanation both are same but LD is most used for transferring from memory to accumulator.
mov is used to transfer data within registers. and ld is used to transfer data from memory to register.
Nice sir🤗🤗🤗🤗
Thank u sir for beautiful explain
Very nice sir❤️❤️❤️
6:00 Push and pop
very helpful video sir thank you
thankyou sir😘👌..helpful...
Your explanation method is awesome .
Superb......🎉🎉🎉😊😊👍👍👏👏✨️✨️
Instructions can vary based on mode of addressing.
Various modes of addressing:-
1) 0 Mode Addressing
2) 1 Mode Addressing
3) 2 Mode Addressing
4) Immediate Mode Addressing
Good
Thanks alot sir 😍💞😘
thank you very much sir
sir..u r great.seriously
thank you sir...
Thanks sir g 👍
Plz complete the coa lecture sir..
Thank you sir g
Sir please upload a lecture on instruction cycle
Thanks for sir ❤
Thanks a lot sir
Thank you sir
thank you sir. please start AI lecture series for net exam
We will start in September
@@GateSmashers ok sir very nice
Thank you😍
Thnku sir
Sir, what is difference between
MOV R1, R2
&
LD R1, R2 ?
i think mov is between registers and in load is generally the operand is loaded in accumulator !
Load − The load instruction is used to transfer data from the memory to a processor register, which is usually an accumulator.
Move − The move instruction transfers data from processor register to memory or memory to processor register or between processor registers itself.
7:30 tysm sir
Sir ye instructions ld push mov ye binary me kaise convert ho jaate hai or kaise inko physically convert kiya hoga ...low level machine code tk jaake explain kren sir if u can .thnks
What is transducer ? Explain in video.
Sir please complete the COA before gate.
1st view sir g thx
Sir, Confuse about function of MOVE and LOAD.
The difference between MOVE and LOAD is when we use Move function, the data will copied from one address to another and on the other hand when we use Load function the data is moved not copied
Sir aap mujhe bhut cute lgte ho ❤❤❤❤❤
Sir plz cover deploma c.s , computer architecture syllabus
Is this enough for gate ece
Fun fact: Turn ON the subtitle and enjoy reading the translations...xD :)
sir please make videos on data structure
Love it
Hello sir,
All computer organization videos are sufficient for kvs or DSSSB pgt computer science exam....?
Or is there any need to read in book as well...?
Please reply sir.. I am waiting for your soonest response..... thanks in advance
it's been 2 years still no response sir gets lots of comments everyday so it's expected
hello sir ,one doubt!,The memory you are referring here is ROM or RAM.
RAM
@@GateSmashers thank you
sir itna simplify kr dete cheezo ko ki actually mei kya chlra smjh nhi aata
Watching 9 hours before exam😅
Sir mov command se kaise binary data practically move ho jata hai ...iski depth me transistor logic gate level pe jaake batao ???
👏😊
ANY ONE FROM VIT VELLORE CAMPUS😅
In some book, Move R1, R2 means value of R1 will be stored in R2. So is this correct?
no
yes
Smasher sir please toc or discreat math ki bhi class dena
Is it enough for gate CSE?
Good explanation but speaking speed is so fast. It should be little slow
Arrey youtube settings se karlo speed slow..it will help you..
Sir aap punjab se h??
Yes
@@GateSmashers aapke accent se guess kiya. 😀
Thanks sir really enjoying your video series.
👍
Ok.....so i 'm ...at ....3rd.....
Anyone Can Say What is A Difference Between 'Register' and 'Memory'
Do you have any notes
😊
ok
Sir notes dijya tab thik hoga
Can you teach in english...pls
Sorry nhi ho payega ❤
:)
M
Kon
@Gate Smasher
NICE explanation
Sir if possible add videos on all previous year gate question with solution subjectwise .
IF you did it then you will be first on youtube who do this .
And your views will be miilions.
Thanks sir
Thankyou so much sir
NICE explanation
Sir if possible add videos on all previous year gate question with solution subjectwise .
IF you did it then you will be first on youtube who do this .
And your views will be miilions.
Thank you sir
Thank you sir
Thankyou sir
Thank you sir