Professional Grounding and Earthing of Audio Amplifiers

#Earthing #Grounding #GroundLoopBreaker
In this video, by the term earthing, I refer to the connection to the earth pin of the 'mains' power supply and by the term grounding, I refer to the connection to the zero voltage point(ground point) of the power supply rail of the audio amplifier.
Never connect earth pin and the ground point on the power supply together. Always connect them through ground loop breaker. Kindly follow the video and I have explained the connections in detail.
Specifically, I have explained about the requirement and usage of 'Ground Loop Breaker' for proper earthing and grounding of audio amplifiers.
Ganesh Laxmanmaurthy

[@stanleysuresh7409]

Thanks for your video sir, nicely explain about earthing

[@max79444]

Dear Sir, Thank you from England for a very informative teaching video......

[@avr.electronicpoint.5575]

Thank u sir.good information.capacitor value sir

[@melmanuel603]

Supperb explain with good demo
If u can play a music of this amplifier
And make a ground loop and play again it will be more practical

[@FortheSoulFtS]

perfect sir, I suscribed to your channel

[@royalmughal007]

Bhai ap docters ki class lay rahay ho ya koi english elachar pls urdu main baat kren takay sabko asani say smjh a saki

[@default19in]

Looking for this kind of solution Tx so much sir.

[@siddhik6302]

Thank You For Amazing Video Sir it's a humble request please tell me my my Amplifier having nose in Vocals And Bass It's the amplifier board is new not Damaged or anything

[@shafeeqahmed263]

Really good information for diy

[@gtech8449]

Thank You.

[@shafeeqahmed263]

@@gtech8449 my pleasure sir

[@ranjithpk1672]

Super

[@VikramKhetarpal]

Thank you dear, after 100 videos I finally found the video that explains. Always thought earthing and grounding is same. I just have one questions. How about 2 pin devices, how is earthing & grounding managed in 2 pin devices like tv? Also I have 2 very good amps from Yamaha and Marantz, both are 2 pin, eve the power socket at the back has 2 pins only, how is earthing managed there?

[@garygranato9164]

they have chassis grounding where there is *no* earth wire and *no* ground loop breaker, just the star ground directly to the chassis, hench *chassis ground*

[@anhhct]

@@garygranato9164 Hi. Can you explain what is the purpose of chassis ground in this case? Is it for safety reason? if yes then how? I don't have an electrical background so it's a bit hard for me to wrap my mind around!

[@garygranato9164]

@@anhhct i too am an amature. for safety the voltage is sent to ground. and also the chassis is used as a ground point/plain, stray RFI, EMI can be sent to ground via capacitors connected at the right place in the circuit. i think thats how it is anyway.

[@shazadiayesha6907]

Sir if my amplifier chassis wooden, how to ground or earthing with the help of ground loop circuit

[@uddeshyasonkar8069]

can i change the capacitor value to 1uf in the ground loop breaker?

[@stanleysuresh7409]

Sir, pls explain how to make ground loop breaker circuit in video

[@rahulsawant1493]

Sir, when ever electrical switch is on or off , speakers make noise

[@rahulsawant1493]

Any solution

[@gtech8449]

@@rahulsawant1493 Add an RFI EMI Filter to the power line of the amplifier. Search for the same on amazon. (Elcom brand)

[@denxaudio]

Sir

[@ranjansarkar93]

Loura English loura