Nicee ! And yeah for sure it's one of the best 7900xtx considering it's potential to overclock and cooling. However, I just wish AMD fix the drivers soon since in certain games like Cyberpunk, the game crashes when you change some settings and for this build it had the same issue with Hell divers 2 and I had to rolled back the driver version
@seb.evidente7328 thank you ! Means a lot to me ! Just a quick info. The fans that comes with the case are also 140mm which will be a tight fit if you also run 280mm cooler. I recommend going with 240mm so you can top mount it with out clearance issue
Nice build, but a little just a tip. Mount the rad with the tube connections at the bottom. This will avoid pockets of air in the rad being drawn into the pump, this can raise cpu temps and shorten the pump life. Loads of videos on you tube explaining this.
@@KaizentechComputers No problem, the Sapphire 7900 xtx nitro+ is a beast of a card, got mine yesterday. I'm Currently undervolting it via the AMD Adrenalin software. Leaving it on stock settings makes the card really hot.
Do you think you'd be able to do this exact same build in an h6 flow? Im just trying to see how it'd be. My setup will be the same, except with that case
@MartinBentley-y6u if it was me I would try and avoid Intel ATM due to their cpu issues. Especially with the 13th and 14th gen higher end chip 🙂. I think the current setup is more than enough to run flight sim but yeah just my opinion and hope that helps
Do you have a video of what you do after building the computer. What are the steps? I need the windows boot installed first? Any other details other than drivers to update?
@MartinBentley-y6u that's a very good question ! I will try and make a video about this ! It might not be the best methods for everything but it's something I usually do when I finish a pc to test it stability
@MartinBentley-y6u but to answer your question , yes i usually install windows first, i used ninite to install some apps all at once , install all drivers and windows update. Then I do stress test
I bought the 9700xtx saphire today coz of this video 😅 but i have 2 questions. The fans dont spin when i start the pc is it normal ? And I didnt put the rgb cable and still make colors what the difference with/without?
@Milotch heyy ! That's awesome man ! Ok so first the fans don't spin that's normal 😀. AMD has something call zero fan mode which don't turn on the fan unless it's underload to reduce noise . And the rgb cable is just to sync the rgb on the graphic card to the motherboard rgb header if not you can always use the saphire software to control the rgb it just won't be sync with other rgb parts 🙂 hope this helps
@Milotch in my opinion, it still not enough with the gpu support that comes with the card. It still sag toward the end so I think it's better to have additional support 🙂
@Scorpion-ur8qq if you can get a argb splitter for the cpu cooler fans then no need ( they are cheap on ebay) B650 ASUS WIFI only have two argb headers 😊 hope that helps
@@KaizentechComputers Ok thanks, but what is the difference between splitter for the cpu cooler fans and ARGB HUB? If I can connect 4 fans together in one connector, then it is possible not to buy it? Thank you for your help
@Scorpion-ur8qq well hub you can control the rgb for all connected devices. A splitter is just to join two devices so it can use only one output. So pretty my link the cpu cooler fans into one header and the other four fans to another and you should be ok
Bhai me aj bhi intel i5 first generation use karta hu i can't even play modern games can u help me 🙏 kya ap mujhe kuch giveaway karsakte i would mean alot for me❤
Heyy, thank you for your comment and support but at this time, I’m not able to accommodate any giveaway 😟, as I’m focused on growing this channel. However, I’ll keep this in mind for the future, and I hope you continue to enjoy the content I share and the support. Thank you again !
My Dream PC
@SUPERSONICV2 hope you can make it a reality ! 😄
Nice build.I too have Sapphire Nitro+ 7900XTX in my rig,monster of a GPU.
Nicee ! And yeah for sure it's one of the best 7900xtx considering it's potential to overclock and cooling. However, I just wish AMD fix the drivers soon since in certain games like Cyberpunk, the game crashes when you change some settings and for this build it had the same issue with Hell divers 2 and I had to rolled back the driver version
My dream build! I love seeing it executed so well! I'll be copying the parts list for sure! ❤
@seb.evidente7328 thank you ! Means a lot to me ! Just a quick info. The fans that comes with the case are also 140mm which will be a tight fit if you also run 280mm cooler. I recommend going with 240mm so you can top mount it with out clearance issue
@@KaizentechComputers my parts list has been modified accordingly! Thank you so much! Subbed and liked 😎
Wow another clean build man. Great job !
Good build. I dunno if I’d try NZXT again after the h5150 case from my previous build.
Nice build, but a little just a tip. Mount the rad with the tube connections at the bottom. This will avoid pockets of air in the rad being drawn into the pump, this can raise cpu temps and shorten the pump life. Loads of videos on you tube explaining this.
@@Wayne55231 thanks for that ! Always appreciate a good tip 🙏
@@KaizentechComputers No problem, the Sapphire 7900 xtx nitro+ is a beast of a card, got mine yesterday. I'm Currently undervolting it via the AMD Adrenalin software. Leaving it on stock settings makes the card really hot.
I own this but with 32gigs sys mem. Mild Undervolt and OC. I used the H9 Flow case. All Blacked out.
beautiful beast of a build
@@Alteronx thank you ! Appreciate the comment 😁 hope you enjoy the build video and stay tuned for more to come
My rig is similar: 7800x3d cpu, 7900 xtx gpu, msi x670e carbon wifi mobo, g skill 6000 mhz cl 30 16x2 ram, Samsung 990 pro 1 tb ssd, msi a1000g 1000w psu, arctic liquid freezer ii 240 argb, corsair 4000d airflow case (intake: 3 front, exhaust: 2 top and 1 back)
looks very good.
Dream CPU Ryzen 7 7800x3D :(. still stuck at Intel core i7 4790.
Wheww nice build 😮
nice video, All the content I like
@ncchang5037 thank you !
did you put cable extender or not cuz if not man that psu cable looks clean
@Jhon-609z Thank you ! Yes I did ! I used formula mod cables extension. They are good quality and well priced. Been using them for a while
Four sticks of DDR5 RAM on an AM5 system is bold. Are those more stable now?
@hauntedvoyager8196 yep they wanted 4 sticks with 64gb so I didn't want to go hard on the timing . Wanted something more stable 🙂
🔥🔥🔥🔥🔥🔥🔥
Love u brother❤
@@MdAbir-X-wota777 thank you ! Hope you enjoy the contents
*-* niceee buildd again
Do you think you'd be able to do this exact same build in an h6 flow? Im just trying to see how it'd be. My setup will be the same, except with that case
@Leonz1215 definitely the h6 is bigger than the h5 and you can even mount a 360mm at the top too
Could you please share your parts list for this build.
Sorry I found it. Do you think its okay to build this or should I go with Z790 now? I want to use with Microsoft Flight Sim 2024
@MartinBentley-y6u if it was me I would try and avoid Intel ATM due to their cpu issues. Especially with the 13th and 14th gen higher end chip 🙂. I think the current setup is more than enough to run flight sim but yeah just my opinion and hope that helps
Do you have a video of what you do after building the computer. What are the steps? I need the windows boot installed first? Any other details other than drivers to update?
@MartinBentley-y6u that's a very good question ! I will try and make a video about this ! It might not be the best methods for everything but it's something I usually do when I finish a pc to test it stability
@MartinBentley-y6u but to answer your question , yes i usually install windows first, i used ninite to install some apps all at once , install all drivers and windows update. Then I do stress test
I bought the 9700xtx saphire today coz of this video 😅 but i have 2 questions. The fans dont spin when i start the pc is it normal ? And I didnt put the rgb cable and still make colors what the difference with/without?
@Milotch heyy ! That's awesome man ! Ok so first the fans don't spin that's normal 😀. AMD has something call zero fan mode which don't turn on the fan unless it's underload to reduce noise . And the rgb cable is just to sync the rgb on the graphic card to the motherboard rgb header if not you can always use the saphire software to control the rgb it just won't be sync with other rgb parts 🙂 hope this helps
@ thx man u are a legend
@Milotch you're welcome man, glad I could help
my electric bill watching this
Undervolting has left the chat
If you can afford a high end gpu then electric bills is just a snack.
Is the Little gpu support under the gpu obligatory or the support that come with the gpu is enough ?
@Milotch in my opinion, it still not enough with the gpu support that comes with the card. It still sag toward the end so I think it's better to have additional support 🙂
good
@@SARATHREN thank you !
I have 6 fans 2(argb) of which are water cooled and 4 case fans, do I need an ARGB HUB? Motherboard asus tuf gaming b650 wifi
@Scorpion-ur8qq does the cpu cooler comes with a argb splitter ? And are the argb fans daisy chained ? If yes for both I think you should be ok fine
@@KaizentechComputers Yes, 4 fans are mated to each other and the other 2 are unswiped and not mated, so no need for an ARGB HUB?
@Scorpion-ur8qq if you can get a argb splitter for the cpu cooler fans then no need ( they are cheap on ebay) B650 ASUS WIFI only have two argb headers 😊 hope that helps
@@KaizentechComputers Ok thanks, but what is the difference between splitter for the cpu cooler fans and ARGB HUB? If I can connect 4 fans together in one connector, then it is possible not to buy it? Thank you for your help
@Scorpion-ur8qq well hub you can control the rgb for all connected devices. A splitter is just to join two devices so it can use only one output. So pretty my link the cpu cooler fans into one header and the other four fans to another and you should be ok
Price?
@md.mehedihasan622 heyy ! I have put the prices for the parts in the description thanks
😍😍😍😍😍😍
too bad this is not a tutorial for the ones like me that would like to put one together
I hate when msi dragon logo is half covered 😑
wow those cpu and gpu but a low end 650 board wtf And i hope thoes extra 2 ram modules are rgb only. Never use more than 2 sticks.
WOW... he put 4 dimms of ram... we know what is wrong
Bhai me aj bhi intel i5 first generation use karta hu i can't even play modern games can u help me 🙏 kya ap mujhe kuch giveaway karsakte i would mean alot for me❤
Plz 🙏 give me some basic cpu that i can run gta or cs2 hope us read my comment it would mean me alot ❤
Heyy, thank you for your comment and support but at this time, I’m not able to accommodate any giveaway 😟, as I’m focused on growing this channel. However, I’ll keep this in mind for the future, and I hope you continue to enjoy the content I share and the support. Thank you again !
@@KaizentechComputers it's ok bro
what you live in africa ?