Sliding glass door hard to open and close - Adjust rollers
ฝัง
- เผยแพร่เมื่อ 9 พ.ค. 2023
- If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases.
Dawn Dish soap: amzn.to/3VHb4nd
White Lithium Grease: amzn.to/3pfq5As
Plastic screw covers: amzn.to/3NPdGgP
Sprayway Glass cleaner: amzn.to/41sH145
New Track
amzn.to/47qEuuC
1. Sliding glass door not locking - Adjust Latch
• Sliding patio glass do...
2. How to mount skateboard on wall
• How to hang skateboard...
3. Install skateboard wheel bearings and wheels
• Install skateboard whe...
4. Build your own custom logo fingerboard
• DIY design and build a... - แนวปฏิบัติและการใช้ชีวิต
If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases.
Dawn Dish soap: amzn.to/3VHb4nd
White Lithium Grease: amzn.to/3pfq5As
Plastic screw covers: amzn.to/3NPdGgP
Sprayway Glass cleaner: amzn.to/41sH145
New Track
amzn.to/47qEuuC
1. Sliding glass door not locking - Adjust Latch
th-cam.com/video/UNY99Q7Af0U/w-d-xo.html
2. How to mount skateboard on wall
th-cam.com/video/c5QDCKZNGH0/w-d-xo.html
3. Install skateboard wheel bearings and wheels
th-cam.com/video/ue-rSP-OCSo/w-d-xo.html
4. Build your own custom logo fingerboard
th-cam.com/video/5kg1NHGMZsE/w-d-xo.html
It says that grease is unavailable?? Which other would you recommend
@@sableduvall197
Good morning ☕️
If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases.
amzn.to/3Qz2ky8
😁👍🧰
Great video that helped me understand what the issue was that we were having with our sliding door. Thanks!!!!!
Thank you as well. We appreciate you taking time out of your Saturday afternoon to reach out to us.
Little things like this mean the world to us, let us know if you have any questions. 🧰
Thank you, this wasn't what I started looking for but this is exactly what I needed to know.
Very cool, and you are welcome. Thank YOU! Great to hear our video was helpful.
Reach out to us any time! 👍
My thoughts exactly! Didn’t even know I needed to know this just though maybe I needed to lubricate it!
I'm closing on a home in two weeks. This hopefully should fix both sliding doors! Thx
Absolutely fantastic post. I'm going to go and tackle my sliding door. Thanks again
We are very honored to read this, much appreciated. Looking forward to hearing back from you on how it goes.
👍🧰
@@DIYwithMichaelBorders I don't think he was able to get it fixed, unless he just didn't commnt back.😂
@@michaelbryant972
Let us know if you have any questions. 🧰
Excellent job, thank you so much!
Good morning ☕️ you are welcome. We are honored you reached out to us and shared this.
🧰
Impeccable! Thank you!
Thank you, and you are welcome. 🧰
Very helpful! Thank you
We appreciate that, thank YOU!
😎👍🧰
Great teaching
Just learned something. Great video.
We are honored to hear, thank you. Hope you have a great Friday night and enjoyable weekend.
😁👍🧰
Excellent! Thx for sharing.
You are welcome. 😁👍
Thanks man this is a thumbs up video . Thank youuuuuuu
You are welcome. 😁👍🧰
I did mine just now. Thank you happy Thanksgiving from Orsnge County California 😊
You are welcome. You have beautiful weather in Orange County. I was just in Long Beach CA the last few days.
We are back on the east coast now and enjoyed a great family gathering for Thanksgiving. Hope you had a great Thanksgiving day.
Many more helpful videos to come! 😁👍
@DIYwithMichael orders no way I work in Long Beach memorial hospital off Altantic Blvd in Long Beach. Very nice sir. 👌
@@conchim99
Awesome, we were staying at the Westin Hotel on ocean Blvd.
😎👍
thanks, exactly what i meed.
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community.
Great to hear our video was exactly what you were looking for. Let us know if you have any questions and hey if you’re interested, join our DIY ecosystem and help us grow an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
Thank you!!
Good morning, just poured a ☕️ and am sitting down to answer any and all questions for the DIY community.
Very kind of you to reach out to us. Let us know if you have any questions and hey if you’re interested, join our DIY ecosystem and help us grow an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
This was amazingly helpful. Thank you!
You are welcome, means the world to us that you took time out of your Monday afternoon to share a comment.
Reach out to us any time. 👍
Nice job on the video
Thank you, we appreciate that. 🧰
Great info. I will try that. Can you clean with w40 and then add some wax candle patafin on track to help slide better?
If that doesn't work, then do I have to replace the rollers?
Why did you replace yours?
Did you make a video?
You are very welcome, we haven’t used WD40 before because it doesn’t serve the same purpose as lithium grease.
Lithium grease is the product to use when performing this project.
😎👍
@@DIYwithMichaelBorders I used w40 to clean track and then the lithium grease spray you recommended and slides better now. Gracias!
@@joaquinsuarez6090
That’s awesome, WD40 to clean and lithium grease to lubricate is a great idea! 😎👍
Thank you!How to install key lock?
You are welcome, we have a few options below.
th-cam.com/video/UNY99Q7Af0U/w-d-xo.htmlsi=PJxMAFP8Q30M6m1h
th-cam.com/video/nGLZTEFRv2I/w-d-xo.htmlsi=uZ6G5zUVUuXM0kvA
th-cam.com/video/ilQjcOLd5gE/w-d-xo.htmlsi=LyD1rHdg63bYV-CV
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and help us grow an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
Awesome advice! Do you adjust top at all?
Good morning ☕️ we appreciate that. Bottom rollers are the ones to be adjusted, most doors don’t have upper rollers. 😎👍🧰
Where can I purchase lithium grease
Nice....
Good morning, just poured a ☕️ and am sitting down to answer any and all questions for the DIY community. Thanks for sharing this. 👍
Let us know if you have any questions and hey if you’re interested, join our DIY ecosystem and help us grow an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
Thanks for this video! My friend told me put wd40 on the wheels from the little hole, would you recommend that? Her door is now sliding like a brand new one. It's so smooth I almost broke it sliding it 😂. Thanks!
Thanks for watching, WD40 will work however won’t be as good as lithium grease.
Even lithium grease though is a temporary fix as we mentioned in the video. The best thing to do is lubricate the rollers with lithium grease so it buys you time to purchase new replacement rollers.
You can pick a day that works best for you as get those old worn out rollers replaced. Below is our step-by-step video on replacing rollers.
th-cam.com/video/Win-6GCcgy0/w-d-xo.htmlsi=D9pAN18ketK5WWeh
If you end up watching it, let us know if it was helpful. 👍
My screw is loose from the bottom does that mean their broken would i need new rollers r they expensive?
Thanks for watching. In that case, it’s best to replace your rollers. Out with the old and in with the new.
You will have new rollers that slide very efficiently and brand new adjustment screws that can be adjusted with easy.
Below is a link to a video of us, show me the steps of replacing these exact rollers.
th-cam.com/video/Win-6GCcgy0/w-d-xo.htmlsi=w3ozs_rhz8mpdYtX
New rollers are very price friendly. Keep us posted. 🧰
Hello. This was very informative but my issue is that the frame of the sliding door is hitting the metal frame of the fixed panel. Any ideas on how to fix that would be much appreciated.
Thanks for watching, any update? This can happen if the lower rollers are offset significantly.
Another cause is damaged or warped door…or warped frame that the door rests and operates in.
Another cause is if the door was recently removed and reinstalled…it’s possible that the door is not installed properly inside frame where the rollers are properly placed on the slide track.
@@DIYwithMichaelBorders thanks for the reply! The bottom of the door and the track it sits on seem fine. What I noticed is that the sliding panel seems to have a bit of movement on the top & it seems to lean towards the fixed panel. Not sure if that makes sense. I wondered if there’s supposed to be something at the top keeping it at a certain offset from the overall frame. Someone told me this can happen due to the house settling over time and I can see that, but the question is if there’s anything at all to solve the issue, aside from replacing the door.
@@marlen.rumiantseva
Thanks for the follow up, this is helpful information. Two things come to mind from here.
1. You may be spot on when you say that the upper portion of frame is possibly missing a piece that helps secure/align sliding door so it doesn’t make contact with stationary door. This will depend on your specific setup/install/and brand of unit.
2. The door is sitting a bit to low and because of this, it’s not fully being assisted and guided by the upper portion of frame that the door sneaks into. Basically the upper portion of door has more room to lean back and forth as it travels.
This can be fixed by adjusting the lower rollers out/down, which in return will raise the door higher into the upper framed slot/guide.
If the rollers are not adjustable due to their age/condition, they will need to be replaced.
Keep us posted. 🧰
@@DIYwithMichaelBorders thanks again! I should have specified that there doesn’t seem to be or ever have been any kind of guide at the top. Another detail is that this door is at a condo that was built in 1971 & to be honest not sure if it’s original but I’d be surprised if it was ever replaced. I realize this is a bit of a unique situation & it’s hard to diagnose or find a solution without assessing the issue in person. I appreciate your suggestions. Thanks
@@marlen.rumiantseva
We are happy to help. Keep us posted.
It seems that I've damage the sliding track, is there a replacement track or a way to fixing it??
Thanks for watching, we can hopefully help. You may need a new track. If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases.
amzn.to/47qEuuC
👍
🤘🤘
Thanks for watching. 👍
so what if the screws a froze up??? I cant turn them!
Good morning ☕️ you can apply some PBlaster to the screws which will break away and loosen up the rust and corrosion that has gathered on screws.
If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases.
amzn.to/4aAGhPp
Keep us posted. 🧰
@@DIYwithMichaelBorders Thank you so much for replying! I will give that a try!
it sucks when you have a door that DOESNT have access to the rollers.
Good morning ☕️
It definitely makes it easier to service the rollers when they are not on the bottom portion of the door and hard to access.
What’s the update on your project, were you able to remove door from frame and replace rollers?
Below is a link to our video showing replacement of these exact rollers on the bottom portion of our door.
th-cam.com/video/Win-6GCcgy0/w-d-xo.htmlsi=BZYlZu4yFuCIKy5r
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and help us grow an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
Not really. Mine has no bottom adjustment
Good morning ☕️ any update? Are your adjustment rollers on top?
hrm. my door cant be lifted. it wont budge upward.
Thanks for watching, any update? Have you insured that your lower rollers have been properly adjusted to the full-up and stowed position?
Having your rollers adjusted up will give you the most room to shift door out of its trim insert.
@@DIYwithMichaelBorders it was basically a shit show. i adjusted the rollers down, by accident and essentially locked the door in place (open, no less). i literally could not budge it.
ended up having to take it down completely and then clean/adjust the rollers.
It slides, but still is not smooth. But its 30 years old. ill probably just get a new one come spring/summer
@@chrisi621
We appreciate the follow up. Being 30 years old, it’s a real good time to replace the lower rollers.
Below is a helpful link that shows us replacing the lower rollers on this exact door.
th-cam.com/video/Win-6GCcgy0/w-d-xo.htmlsi=3gyHtc0MWy6YNddN
You may find a very helpful. 🧰
How would I remove that door if needed?
Thanks for watching, we can hopefully help. Below are two links, one shows removing door and the other link shows replacing rollers. 😎👍
th-cam.com/video/I8VmeHOT-y8/w-d-xo.htmlsi=Fv5gsB3BJAeIlyiX
th-cam.com/video/Win-6GCcgy0/w-d-xo.htmlsi=7LUQJlF43zn-nzBE
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
Is there a way to tell how it's set? I had my shoulder replaced and I think my asshole roommates set it on hard! Unfortunately I only have use of my right arm so is there an easy way to tell how it's set?
Hahaha
@@jacksonbennett84 what my lack of an arm? Or the thought of them pulling that on me?
Hi there! The sliding glass door you're working on seems remarkably similar to one I have at my place. Could you kindly share the make and model of the door? I've been having a hard time finding any way to identify the manufacturer on mine. Thanks in advance!
Thanks for watching, ours is the exact same…no info whatsoever on the door. If you’re looking to replace the rollers, we will post a link to the rollers we purchased for this exact door.
If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases.
amzn.to/3Jkj9JI
These tandem rollers made the door slide like brand new once installed.