How to make Mini AC At Home || Homemade Air Conditioner
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- How to make Mini AC At Home || Homemade Air Conditioner
➤About This Video :-
👉Forex sheet
👉 Heat sink with fan
👉Smile heat sink
👉Heat compound
👉Cpu fan x2
➤Thanks For Watching.
If You Like This Video, Don't Forget to like, comments & share the video.
➤[Social Media]--
➤ Facebook Profile :- / sumon353875
➤Facebook Page: / crazy-think-. .
➤twitter: / crazy-think-. .
➤Business Email:-
CrazyThink3600@gmail.com
➤SUBSCIR Here ::-www.youtube.co...
➤About Crazy think Channel:
This channel is about Technology DIY How To Home Made Tricks and entertainment.
➤DISCLAIMER: My videos are given just to entertain and watching purposes only. Plz, don't try to do this at home without proper safety instruments.The creator of the video is not liable for any loss or damage caused by your reliance on the information contained in my videos. Enjoy yourself but always be protected, and all that you do is at YOUR OWN RIrelay
➤Here Some of my Other Great Videos:-
➤Usb Spy mini Camera
• Usb Spy mini Camera ||...
➤How to make mini otg Spy Camera - at Home • How to make mini otg S...
➤How to make Spy CCTV Camera at Home - with old phone camera
• How to make Spy CCTV C...
➤Automatic ON-OFF 220volt Light Switch || Simple DIY Project - at Home
• Video
➤How to Make a Flying Helicopter With Matches and DC Motor
• How to Make a Flying H...
➤Free Wi-Fi Internet 100% Work || How to make Free Internet Unlimited
• Video
➤How to make Diesel Engine Generator Model - at Home
• How to make Diesel Eng...
➤Wow: Amazing Idea's with Bt136 & RGB LED
• Wow: Amazing Idea's wi...
#mini
#crazythink Think
It took me about 20 minutes to install it on my own. As long as you can lift it out the box and up into position you’re good. I did have to break the box to get it out as it was a snug fit. I followed the installation video on you tube which was a big help. I added this to support central air in my house that was struggling upstairs because of my house design. Lovely unit. Very quiet th-cam.com/users/postUgkx_hHgTlzH3uk31Fe2RVS3xEbXHGaN_z5T and looks sharp. Had it in a couple of weeks and so far so good. It’s cooling a bedroom about 25ft X 15 no problem at all.
Eu vi dois problemas, primeiro foi o tipo de refrigeração da peltier, segundo a fonte de alimentação não e adequada
nice video bro. Does it produce chill air or normal room temperature air?
Chill air
chill air that chills the room
um you were supposed to peel the center piece of foam off
Air-conditioner If you know what to do if the water is falling, please tell me
A 12v fan can never be as cool as removing frost without using a refrigerant or ice
mattress
It is not the fan that produces cold but instead it is the thermo electric peltier that creates heat on one side and cold on the other side when current passes through it. With sufficient and efficient design along with fans, u can reduce temperature upto -1 or 0 degree celcius on cold side whereas high temperature on hot side. For better working, try to remove hot air as far as possible
ভাই একটা বানায় দিলে টাকা দিমু
Так краще вивести трубу з теплим повітрям ,а так це трата енергії він виробляє тепло і холод і виходить , ефективність 0 а енерго потері 100 бо елемент пельтє їсть багато енергії
It won't work because the peltier is isolated from the heatsink and therefore can not get rid of the heat it's producing! The white foam prevents it.
3:59 .. absolutely right 👍👍
Right
True maybe he forgot to remove that, the peltier must be in contact with the heat sink.
The white foam is a thermal pad. They are often used on computers, they do conduct heat.
It will but the cold side will not get nearly as cold. This whole design is bad it will produce heat behind it and cold infront. This could also be made so much smaller... First off ditch the cooled air chamber get a big heat sink the bigger the better aluminum preferred no heat pipes they wont work on the cold side anyway. High cfm quiet fans bigger the better try to isolate cold side from hot as best as possible if possible run a heat exchanger with antifreeze in a loop with an old heater core outside pumpunt the hot water outside through a heater core with any fan you like outside the more cfm through the heater core the better since it is outside noise and size isnt an issue.
This isnt a real AC, Its just a box with a petier element. That does not make any sense because the hot air comes out at the back and its in the same room like the cold side. Its basically heating the room its cooling. Totally useless.
No similar product sold online for low-income group. Global warming many died of heat stroke. Life is suffering.
Bro answer my question you use two 12volt socket but you use only one and you only conection the one socket so in the start of video i can see that you use wire from second socket what the wire you are a cheater
You're Genius Bro😉...
I will make this cooler too. I like it very much. The designs you make are amazing and I have all kinds of electronics.☢
genius? the air intake, the blower and the exhaust at the back was combined inside it should be splitted. lol.
@@sevp1364 BTW..its works..CHILL🌚
@@Hedgehog_DIY it's really chill the room ?
@@jarvis8036 ans .
The cooling output of this air cooler is equal to using a desk fan. I would say its a waste of time building this since a peltier module isn't designed to cool a room. Its for mini fridges
Super bro. But how much it will be come
Thanks
This is a bunch of BS, as evidenced by the creator's refusal to respond to questions & provides details about the construction & materials. He is just trying to make money, without providing anything of real value or use.
Bahi ise ke price ketni hi isa ka woet aur ampira ketne hi
creo que hubo un error , al poner la primera celda pertier no desprendio la goma/foamy del centro de lo que parecia cinta doble cara, entonces se supone que es para evitar condensacion y se toquen lado frio y caliente, o la almoadilla tranfiere el calor??? me parecio extraño, si estoy equivocado,comentarios libres :D
Sir hot air goes into the same room that you are trying to cool ??.....
Great, thanks. But how can get the box that contains all the tools that used in the video?
The box containing all the tools used in the video will be uploaded to our channel. Thanks for giving me your beautiful idea.
@@CrazyThink360 please give the link for components and name also for all components,please sir.
@@CrazyThink360 Can I dispense with peltier module ?
Fake, this thing won't do anything on you're room, real air-conditioning are still cold
Kitna energy lega 1 ghante may ye mini ac agar 9w led bulb se compare kare to..
Before you do this make sure your smoke alarms are working , your kids are in another house and you have an escape plan.
Buen dia sus ideas son muy buenas me encantaria poder hacerlas pero estoy en cuba y no hay en donde comprar los componentes ,gracias por los conocimientos que brinda
No le hagas caso, las células peltier que usó son muy ineficientes y si no envías el calor para fuera ni siquiera enfriará. Investiga el ciclo de refrigeración y trata de conseguir un compresor viejo con algo que te sirva de condensador/evaporador y tendrás un aire acondicionado real.
@@mateojbuteler8974 jajajaja es verdad
la placa esta en la caja pasando el calor de un disipador a otro , eso te deja que dentro de la caja no cambia la temperatura
es como poner el motor y todo el circuito de una heladera adentro.
Are we use cardboard?by the way..ITS AWSOM!!!!
Lừa đảo! :)) không bao giờ có chuyện đó
I'm working on this project....need help 🥺
Did anyone else see the fly on his glove at th-cam.com/video/bIoQleqr8D4/w-d-xo.html?
Unfortunately no. If you understood basic thermodynamics you would know that this type of setup (in this configuration at least) cant do anything apart from increase your energy bill. The reason this doesn’t work comes in with the way the heat exchange is set up. As we know, Peltier modules or Thermo electric devices, produce a cooling and heating effect on both sides. Which side gets hot and which side gets cool depends on the direction of the current AKA electron flow. Taking this into consideration, the whole reason AC works is because of the way temperature works. Temperature in itself is defined by the average of kinetic energies across all particles in a given amount of matter. So when we cool a room using AC what we are really doing is removing that kinetic energy from the matter present in the room (i.e. molecules in the air) and 'placing' it elsewhere, we do this using methods of thermal exchange. In this case heatsinks and rotating fans. So for AC (in simple terms) we need two main things. Something that provides a thermal flux, that is a flow in thermal energy. AND something to make the heat exchanges efficient so that we may move this heat elsewhere i.e. OUTSIDE of the room we are trying to cool. With a system like this, our component producing the thermal 'flux' is the Peltier module but in a more common device might be a compressor system. In a compressor system we use a closed loop refrigeration system (this is important) and we alter the pressure that a refrigerant is under. Because of the way the ideal gas law works, when we keep volume fixed (closed system), and pressure is increased (with a compressor for example) temperature must also increase in a fashion that is proportional to the increase in pressure. So, by lowering the pressure in one side of a closed loop, temp of the refrigerant drops and therefore absorbs heat from the surrounding air (via heat exchange methods - heatsinks and fans) and increasing the pressure on the other side, there will be a natural thermal flux between the two sides. The hot side of the AC will warm up as the cool side cools the room, as you may know energy can not be destroyed or created, it can only be moved and change in physical form. Due to this law your set up will not work in this layout. While you don’t use a compressor in your build the same logic applies. Our intention is to move the heat or kinetic energy out of the room but with your design the heat has nowhere to go. On both sides of your Peltier modules you have fans and heatsinks this is correct, but to truly cool the room we must move the heat elsewhere i.e. outdoors so it is not radiated back into the room (which is what happens with your setup). Now, another thing to consider is that no device in this world is 100% efficient so your Peltier modules may be 90% efficient at best and also resistance in wires results in further heat radiation. This means you aren’t even breaking even on your heating vs cooling power. This means as a NET total you will actually heat the room up as you are feeding electricity into a system with nowhere for the heat to go apart from back into the room you are trying to cool.
ps.
Ideal gas law:
Pressure and volume of a given mass of gas at a constant temperature can be given by: P 1 × V 1 = P 2 × V 2
AND If you want to make this design in a way that actually cools the room then simply add a heat removal system. Basically the heatsink for the hot side should have a coolant flowing over it and then the now heated coolant should run to a radiator (with fans for higher efficiency) to a place you don’t mind heating up. This could be another room indoors but any sane person would put this outdoors, it just makes sense. I think a more accessible way to do this would to be to use a AIO liquid cpu cooler. By simply cutting the tubes that run from the radiator to the cpu block and adding a few more meters of tubing (and topping up the coolant after resealing the tubes) this i think would work pretty well as a heat exchange method. Another thing to note is that for this to be truly efficient, you should be using much finer heatsinks. Basically you want as much surface area to volume ratio to maximise heat transfer from the air to the cold side of the Peltier. I mean you could also probably use a cpu AIO cooler for this aswell.
pps.
Hope this makes sense! Don’t be fooled by these awfully seductive physics scams!
هو ايه البتاع البيضه اللي اللي انت حطيتها فوق الحديد
Big Air coolar fan peice
😂bro
what about the heat , produced by peltier module
Bhaiya mujhe ine sab chijon ka name bhej dijiye
I want to buy thish product pls give your contect
புதிய தாக வைத்து kodukkamudiuma
3 fannal jobb lenne sok a hézag ..
Busi
that middle cut out part on that foam used on the heat sink was supposed to be removed, you wasnt supposed to put the module ON it. more like INSIDE it
c'est génial cette pratique pouvez vous les fabrique' sur une tension de batterie(12v)
Muy bonito, pero no es funcional, para tener frio la celda peltier debe dar al exterior, si sigue dentro genera calor por un lado y frio por el otro, asi que lo estas anulando en funcionalidad, a grandes rasgos estas haciendo un ventilador simple. Queda muy bien poner la sonda de temperatura para ver la temperatura generada, pero deberia ponerla en la salida de los ventiladores frontales que es el aire que realmente sale, no pegada al disipador de la celda. Para todo el que quiera hacerlo, puesto que es viable, hay mejores videos donde verlo y que lo explican a la perfeccion.
Bro please give list of materials
Alcका बाद्य किया / नुम चुर्त्तिया A/c बनाय
Fun fact: until one of these guys figure out how to dump hot air overboard, they are only making there work space warmer.
Ye metrial apne kha se liya online liya tha ya shop pr se
Wrong!!! Have to push out square area of foam out and install hot side close to heat sink!
I have make its colling nice
Thank you sir😍😍
@@CrazyThink360 fine you also make I was order all materials from Flipkart ok
Please contact now Crazythink360@gmail.com
at 3:55 mins on video the pvc foam in the middle was not removed which will not let the heat transfer from peltier hot side to the heatsink. goodluck hahaha
Plz bro muja ak bana kar do. C o d hoga plzzz
আপনি এগুলো কোনজাইগা থেকে কিনসেন একটু বলবেন pleass
Maybe daraz
Need the cable diagram for understanding
It sounds like outdoor unit AC
Haduh...lembar forex apa lagi
Ye kaam hi nahi karega,,hottar side separator ke uppor rakkha gaya.fake vdo
Is it safe to consume such Air? after all it is all about Thermoelectric Peltier and thermal paste...
You with wich metrail
Wich metrai?
Plesse check video description
मुझे बना कर दे दो
Ur Peltier module has been burst out after a single use right na.... U should connect it with heat sink properly
Is a fack . All ready AC in rom
How much Electricity consumption kindly tell me
Thanks
si no sacas el aire caliente fuera las peltier calientan mas que enfrian. y tambien tendrias que quitar la espum a en la parte caliente, esa celda habra vivido 10 minutos
Room ekak cool karana pluwanda
this will heat up your room
Wrong! ❌
Heating device is not added in this ac. So how AC will give hot air.
@@manangupta9388 The heat is absorbed from the peltier by the heatsink, and the fan at the back blows away the heat further, causing the other side of the peltier to become cold, where the cold air produced is blown out of the unit by the two CPU fans
@@jhebertdelacruz5437 ngl ur smart what's ur job
No
यह एक रुम को ठंड कर साकते है?
Sir isko banane me kitne rupey kharch ho gye the , aur ye kitne degree°c tak ki cooling karta hai plz reply ❓
Bro if use amazon it will cost nearly 1000or 1500 but if you opt for intel stock cooler and very very cheap fans no rgb it will 700 i think..
@@Validitydoesntexist sir plz tell me part name coll and heat condenser name and chip name plz
@@Validitydoesntexist yr is k part k name batao yr jo chip or candensor us kiye hn amazone sy mangwany k liyh part name batao palz
7uuuuuuuuuuuuuuuuiiuiiuuuuuuuuu
Uuiuuiiuuuiiiiiiiiiiiiiiiiiiiiiiooooooooooooooooiiiiiiii io ho preso la bs
Ho preso la scossa
Goodgup
Where can I get the raw materials? How much will it cost?
Vai coz koto porba?
এটা কিসের বোর্ড
0:04 0:08 sounds like airplane startup engine and Train engine startup 🙂😻😻😹
base on the video this does require some degree of electrical engineering less you risk shorting something
Iske Saman ka link de do
Dejen de mentir!!!!!!!!!
Sell koren ki?
Bro will u purchase for me please
Plz bro if u don't mind
That means ardam kala will u purchase r nat say bro
it is really becoming cold or you just put a ice?
Assalamualaikum
Mini shek size
Bhai abhi explain Karun kya friend double v k flux kyon chhode Hain
Is 12v 5 Amp power supply enough for all these elements?
Yes
Bahi ye kaha sa multi ha maja be bataw comment ma pleze
Sounds like real AC
I HAVE SEEN VIDEO BROTHER PLEASE SEND MEE STEP BY STEP DIAGRAM OF WIRING CUTTING PVC SHEET
Umm how do you make that the thing that makes it cold
Cheat Sajjad
Sir mujhe speed controller ke connecpion bata dinge
Maiiiiiiiiiis, où trouver tout ces composants ?
What's the white thing sandwiched between the peltier and heatsink? 4:15
معجون حراري
@@shwd_101 You talk??
hello I'm asking you If I remove the digital thermometer and plug it in, then the one I will replace is the plug, do you think it's ok to do it or not?
*Wow, Great Invention Bro*
Yes Bro
is this project can cools the bedroom?
This is the project for school science exhibition. Room cannot be much cool
ভাই আমাকে একটি বানিয়ে দিবেন। খরচ দিবো
Hmm
@@CrazyThink360 কুরিয়ার করে দেন
@@CrazyThink360 না হয় হোম ডেলিভারী করবেন
Were can I get the raw material ? How much will it cost ?
Kya majaak hai bhai
dy7
fake !
Peltier its wrong install , white insulation
Fake.
Amazing
how many btu does it have? or should i say micro btu??
Que bueno hacerlos portátiles para carros.
JAJAJJA CHINOS COCHINO DE DONDE SE SUPO QUE VA A SALIR EL AIRE FRIO SOLO SON ABANICOS NESECITA EL COMPUESTO FREON O EL AGUA FRIOA