Wonder how it would look if the urea and black paint was applied again after cleaning off the first black. Would like to think the depth would be unreal
Some questions, I've tried but the result is not as shown 1. I used 46-0-0 Urea (white) 2. How long do you need to wait to dry the urea when you apply? 3. When you spray black, is it black matte or metallic? 4. And when you spray black on top of urea, do you need to dry it or immediately do cleaning with scotch paper 2000 or else?
From videos I've seen, 2. Just until it's dry. 3. Metallic, light coat. 4. When dry, scotch Brite lightly. I've ordered fertilizer myself and will experiment.
@@rikdol it works but I went a different route to paint my bike. Temperature plays a role. I was trying in winter and heat helps apparently. You can expect trial and error. It wasn't plug and play.
@@erworkxz3487 only urethane base right?...and I can only find urea 46 0 0 from us...is it going to work same like 40 0 0?.... and i wanna apply for my guitar is it only working for metal surface? sorry too many question
I tried this and the solution just slides off the metal of my bike. I tried sanding the surface but the water collects in drops, or just instantly slides off the surface. I tried the sponge method and the spray bottle method and it didn't work. I tried it on an aluminum bike frame. It is really cold where I am so I think that was a factor but not sure.
kung gagawa ka dapat Humid ang temperature ng paligid mainit ang panahon. dapat wet sanding n may sabon para walang oil nkkpit para di mabaliwala kapag natuyo na saka pla bubuhusan ng urea solution para maging crystal effect. sana makatulong... kulang paliwanag nasa video.
@@stanleyvictor2998 watch this video, better explanation of the painting part. Product is the same, this video just shows you how to make it the product. th-cam.com/video/TI_wy4PUSXs/w-d-xo.html
Need help, anyone. I got some good crystals, but when I tried to rub off the topcoat it didn't come off. Even with 150 grit sand paper the topcoat is still hard to get off. I'm using Krylon Spray Paint. Am I using the wrong type of paint? Am I supposed to take off the topcoat sooner? Any help would be appreciated.
@@erworkxz3487 ok so I paint silver base then make chrystal effect then paint black base color after sand it then put red candy color and finish top coat
How did you get the crystal solution to stick to the silver paint? Mine just keeps beading on the surface even sanding the paint with 800 grit. I did 1:1 ratio with 3 drops of dish soap. It's probably the silver paint I am using 🤔.
Anzhal po ung paint pag kabuga ng silver boss tsaka siya iapply dapat patuyuin mo ng kusa sa araw boss para mas maganda ung effect nia pwede siya kahit malamig or mainit
red kasi gas tank ko tmx155 ksu international red ang meron ako wla aq candytone red saka nahihirapan aq sa candyred maroon ang kinalalabasan.. hahaha..
Hello sir. Good afternoon. Paano po siya gawin sir? Kasi po nakailang try na po kasi ako gawin pero hindi ko po siya makuha? Kailangan po ba may sikat ng araw or wala po? Salamat po
Boss gud day,ask lang po kung may activator pa po ba na need ilagay sa silver bago spray ung urea solution?naka ilang try na po kasi ako..hindi po lumalabas..pag binilad nman po sya natutuyo po sya na prang naagnas..di po sya katulad ng gawa mo
Hi sir i love your tutorial but it seemed lack in info for me as a beginner on that method🥺 tanong ko lang po sir about the Silver paint basecoat, Acrylic po ba or Urethane ang ginamit nyo? and dapat po ba tuyung tuyo na ang Silver paint bago buhusan ng Urea solution? Sana po ay masagot mo po sir nag subscribe po ako sa channel nyo po☺️
Lahat po gamit ko paint is eurethaine po mam tsaka pag tapos ko mag silver pag katuyo eh kailangan ko pa siyang lihahin para kumapit ang ilalagay mong urea kc pag d naliha is nag hihiwalay lang siya parang water proof ganun kaya kailangan nakaliha tas pag nag react siya tskaa ka na mag black matte black tlga giangamit ko din eh saglit lang kc siya matuyo wag mo ng masyadong patuyuin ung black pwede mo na agad kaskasin ng scothbrite po para mas mabilis makita ang result po
Subrang hirap mg.hanap ng 40-0-0 sir...khit s handyman,s mga mall..khit s robinson,wla nah rn clang stock at mga ngtitinda ng halaman dtu s sucat..san kya nkakabili ng 40-0-0 sir?..baka my alam kang ng.titinda nyan?..big tnx in advanced..🙏
Pwed po ba gumamit ng metallic silver sa 1st coat? Pwed din po ba gumamit ng ibang kulay instead of black? Like grey..para mas tumingkad yong pang last na coat?.. Tsaka need ba tlaga candy sa last coat or pwed din mettalic?..metallic lng kc available ko Sana mpansin nyotong comment ko..salamat.
Pwede naman po pero kailangan po candy kc masyadong makatawan ung mga mettalic colors kaya mawawala ung crystal effect nia at magiging plain lang po siya salamat po sa comment
@@erworkxz3487 thank you sir,nag try ako knina ndi ko alam bat prang ndi masyado natutunaw yung fertilizer parang mugmog na basa kaya ndi ko na tinuloy, sa mga video kasi walang description salamat sir
Why would you put your title in english if you're not gonna speak english bro. Thank you for wasting my time.Definitely not getting a follow or a thumbs up. 👎
Wonder how it would look if the urea and black paint was applied again after cleaning off the first black. Would like to think the depth would be unreal
Idol mas o.k kung foam ang gamitin kesa ibuhos or spray makakatipid sa urea
Very nice, sir, very nice.
Thank you sa tips boss master ♥️
Does it need to be a candy over the top or can you use a metallic basecoat?
Ang angas paps 💪
Salamat po
After black spray paint dried did you wash it again ?
If the black is dried wash it with scoth brite slowly because may video of that is not recording sorry for that
Some questions, I've tried but the result is not as shown
1. I used 46-0-0 Urea (white)
2. How long do you need to wait to dry the urea when you apply?
3. When you spray black, is it black matte or metallic?
4. And when you spray black on top of urea, do you need to dry it or immediately do cleaning with scotch paper 2000 or else?
From videos I've seen, 2. Just until it's dry. 3. Metallic, light coat. 4. When dry, scotch Brite lightly. I've ordered fertilizer myself and will experiment.
@@pierrex3226 how did the experiment go? I want to do my tank this way.
@@rikdol it works but I went a different route to paint my bike. Temperature plays a role. I was trying in winter and heat helps apparently. You can expect trial and error. It wasn't plug and play.
@@pierrex3226 Thanks for answering, i've found a few more videos since this one that explains the process better.
@@rikdoldid you end up giving it a try? Also order the 46 white urea should be getting it today at some point
Plz bro Brother tell me this much what did you apply to get such effect
Sir liquid hot me hi dalana Chahiye kya badhme bhi Dal sakte hai
What?
I don't have paint gun can I do with poly urethane base can spray paint?
Yes u can
@@erworkxz3487 only urethane base right?...and I can only find urea 46 0 0 from us...is it going to work same like 40 0 0?.... and i wanna apply for my guitar is it only working for metal surface? sorry too many question
Its ok it also work un ur guitar i dont know if 40 0 0 works like that
@@erworkxz3487 yours is 40 0 0 right?
What is yours? 46 0 0 or 40 0 0?
Last question for now...lol
Mine is 40 0 0
Очень круто💪👍 получилось👍
D kaya mag matuklap yan sir pag tumagal na? Nilagyan mo ng urea tapos pinAtungan ng pintura D kaya magtuklapan yang pintura pag tumagal na?
Oye amigo porque los cristales me salieron pequeños como hago para que salgan grandes o le hecho más urea gracias 🇨🇴🙏
Good morning ser ask ko lang po yung mixing ratio, bale 100ml of water is equal po ba sa 100grams ng urea?
May I know what substance you put on it to become like crystal, is it petroleum or corsine or what can you say
Urea
I tried this and the solution just slides off the metal of my bike. I tried sanding the surface but the water collects in drops, or just instantly slides off the surface. I tried the sponge method and the spray bottle method and it didn't work. I tried it on an aluminum bike frame. It is really cold where I am so I think that was a factor but not sure.
kung gagawa ka dapat Humid ang temperature ng paligid mainit ang panahon. dapat wet sanding n may sabon para walang oil nkkpit para di mabaliwala kapag natuyo na saka pla bubuhusan ng urea solution para maging crystal effect. sana makatulong... kulang paliwanag nasa video.
im not sure why you put in the dish soap?for what use?
Tnx for ur comment the dish soap is to separate the urea to the paint to make the crystaline
@@erworkxz3487 Do we have to dishwash before or after applying solution??
@@erworkxz3487 is it base black or solid black paint?
Thats only flat black
@@stanleyvictor2998 watch this video, better explanation of the painting part. Product is the same, this video just shows you how to make it the product.
th-cam.com/video/TI_wy4PUSXs/w-d-xo.html
Need help, anyone. I got some good crystals, but when I tried to rub off the topcoat it didn't come off. Even with 150 grit sand paper the topcoat is still hard to get off. I'm using Krylon Spray Paint. Am I using the wrong type of paint? Am I supposed to take off the topcoat sooner? Any help would be appreciated.
I love it boss..
Tnx so much 💓
Dont forget to subscribe for more videos
@@erworkxz3487 my shop kb n pwd ngpagawa ng fairing ng motor? Ty
We have to apply hot or cold solution cooked
Its ok if hot after u cook u can apply it already and by tomorrow its ok if u apply it again when its cold
Sir,candy din yong black?saka bago linisin kelangan ba tuyo na ang black.tnx.
Matte lang po ung black boss para mabilis po matuyo kc mas maganda onti patuyo lang po para medyo light nag dadark po kc siya eh
Can u spray metaflakes on top of it??
Yes u can
Se puede hacer con pintura poliuretanica
Does the method work on plastic, polyethylene which is on some motorcycles.
Works eather plastic or metal in motorcycle
Tolong di bantu kemaren saya bikin gituan ga jadi gimana solusi ny kk
Puede ba urea firtelizer 46.00
Bro how many coat of clear is needed for best finishing?
3 coat is rh best sometimes ill do twice only
@@erworkxz3487 thanks 😁
Two medium. Coats needed
Ohhhh jo Lain aate hai Ohhhh liquid Ka Kya naam hai
Pati po ba yung silver at black candytone din ba?
Hindi po boss matte black lang po ginamit ko
Tanong po paps kusa lang ba na mag ganyan design nya na Cristal after spray ng urea. O may iguguhit pa?
Opo mag kusa lqng siya kaya antay nio lang po matuyo
Sir plz how many camical to used crystal effect
Yan lang boss s vide isang baso lang
Uriya mix in Same quantity of water
Opo paps same sil isang baso lang
My work helmet making
Starting only try
White powder is salt, isn't it?
I look forward to the answer!
No
No thats urea fertilizer
Nice, Ganda ng Result!
Boss ano recommended m brand for Spraint paint? saka un s Clear coat, ung iba ksi pagnatuluan ng gasoline nbabakbak?
Nippon paint boss or may budget ka easicoat
Hi did you put clear coat before applied the cook solution thank you
Yes i put topcoat after i finish the crystal
@@erworkxz3487 thank you but did you use top coat before putting crystals
No i finish all the process before putting topcoat
@@erworkxz3487 ok so I paint silver base then make chrystal effect then paint black base color after sand it then put red candy color and finish top coat
Yes thats it
boss ok lang ba kahit anung silver, or sparkling silver talaga?
Kahit anu po boss basta manipis lng na silver
boss anong base coat n gamet mo urethane b or acrylic
Urethaine boss
After apply black coat how many minutes wait for scrubb the black paint😊
Wait until 5 mins use matte black for fast dry and u see if its dry
@@erworkxz3487 tqs for Ur reply comrade 👍
Super
Which stuff is used for glazing
Clear
pwede po ba ito gawin sa samurai paint
Pwede po 😊
Tnx Bo's nagbiog k Ng ganyan KC puro ibang bansa Yan maintindhan nnmin Kung ano material San po b nbili yang powder nyan tnx God bless po
Ah sa puoltry boss ung bilihan ng patuka ng manok or sa mga naghahalaman kc pataba po yan eh
How did you get the crystal solution to stick to the silver paint? Mine just keeps beading on the surface even sanding the paint with 800 grit. I did 1:1 ratio with 3 drops of dish soap.
It's probably the silver paint I am using 🤔.
paps gano katagal po bago matuyo?
Papalamigin b muna bago I apply yung urea o mainit I aapply Nu klase pintura sir ginagamit sa ganyan Salamat
Anzhal po ung paint pag kabuga ng silver boss tsaka siya iapply dapat patuyuin mo ng kusa sa araw boss para mas maganda ung effect nia pwede siya kahit malamig or mainit
I can't cope with the mixture, no matter what I try, I only get small crystals. What is the mixing ratio urea to water? Thanks for the help..
1 is to 1 only in plastic cups
question po sir.. kapag hindi candy tone ang ginamit lalabas din ba ang crystal effect nya??
Pwede yan boss plain lang ung silver at black sa fertilizer tlga siya para mag react
red kasi gas tank ko tmx155 ksu international red ang meron ako wla aq candytone red saka nahihirapan aq sa candyred maroon ang kinalalabasan.. hahaha..
Manipis muna boss sa umpisa kailangan d makatawan ang ikukulay mo pa lumabas siya
bakit ung nagawa ko maliliit lang ung crystal effect? ano kayang problema?
Hello sir. Good afternoon.
Paano po siya gawin sir?
Kasi po nakailang try na po kasi ako gawin pero hindi ko po siya makuha?
Kailangan po ba may sikat ng araw or wala po?
Salamat po
Kailangan po mainit ang panahon boss or tama sikat ng araw po
46-0-0 boss yung gamit ko tama po ba?
Yes boss tama po yan
@@erworkxz3487 salamat boss
Ok boss salamat din practice lang boss ako din taga kong inaral yan h
Sir San poba Maka beli nang candy red
Boss gud day,ask lang po kung may activator pa po ba na need ilagay sa silver bago spray ung urea solution?naka ilang try na po kasi ako..hindi po lumalabas..pag binilad nman po sya natutuyo po sya na prang naagnas..di po sya katulad ng gawa mo
Baka sa timpla boss wala na po ako nilalagay na iba ung niluto lang na urea
Maari nga boss try ko nlng po ulet..salamat Godbless
Cge cge boss nakailang ulit din ako dyan bago ko na perfect kailangan mainit ang panahon para tlga nag react siya
Sa pag spray po ba dpat mainit o malamig. ? Thank you po
Mainit dpat paps para mas maganda ang kalabasan
Ahh uk thank you po. .pag na spray naba nang black papatuyuin paba bago hugasan o di na. ?
Saglit lang paps matte black gamitin mo para mas mabilis matuyo konti lang manipis lang naman ibabanat mo eh
Urithane paint poba gamit mo sir??
Opo boss
@@erworkxz3487 ahh okay...salamat sa sagot sir
Wala problema boss
@@erworkxz3487 ano nga palang brand ng urithane paint ginamit mo sir??
Pede ba final coat white lods
D po makikita ung crystal effect po
boss kung samurai paint ba ok lng
Pwede din boss
Mane nak dapatkan UREA
idol pwde po ba yan sa ibang kulay halimbawa sa blue.thank u sa tugon idol😊😊
Oo naman boss may candy blue na paint tayo basta hindi makatawan ng pintura boss pwede yan
mas ok po sna idol kung bawat kilos may nabnggit kung pano,may mga bagay kc lods na yung iba diko maintindhan..paint pa nman pinaka gusto ko😊😊
Hi sir i love your tutorial but it seemed lack in info for me as a beginner on that method🥺 tanong ko lang po sir about the Silver paint basecoat, Acrylic po ba or Urethane ang ginamit nyo? and dapat po ba tuyung tuyo na ang Silver paint bago buhusan ng Urea solution? Sana po ay masagot mo po sir nag subscribe po ako sa channel nyo po☺️
Lahat po gamit ko paint is eurethaine po mam tsaka pag tapos ko mag silver pag katuyo eh kailangan ko pa siyang lihahin para kumapit ang ilalagay mong urea kc pag d naliha is nag hihiwalay lang siya parang water proof ganun kaya kailangan nakaliha tas pag nag react siya tskaa ka na mag black matte black tlga giangamit ko din eh saglit lang kc siya matuyo wag mo ng masyadong patuyuin ung black pwede mo na agad kaskasin ng scothbrite po para mas mabilis makita ang result po
Magkanu magpagayan paps?
Anu po bang motor paps?
@@erworkxz3487 bonus 110
Anu kulay ng motor mo paps at saan ilalagay? Ung mga paglalagyan?
Pm mo ako paps fb ko eurico de jesus
@@euricodejesus6315 Ty paps
San makakabili ng 40-0-0? Pwede na kaya ang 46-0-0?
Iba po un mam sa handyman meron po tsaka sa mga nagbebenta ng mga tanim po
@@erworkxz3487 salamat boss. Susubukan namin ng asawa ko yung ganyan.
Opo basta isang baso ok na po un un lang ginawa kong sukatan eh
Subrang hirap mg.hanap ng 40-0-0 sir...khit s handyman,s mga mall..khit s robinson,wla nah rn clang stock at mga ngtitinda ng halaman dtu s sucat..san kya nkakabili ng 40-0-0 sir?..baka my alam kang ng.titinda nyan?..big tnx in advanced..🙏
Naku dito samen boss handyman meron pa eh
ok lng ba boss na mski d candy color gmitin? ty
Pag makatawan po kc natatabunan lang nia po ung crystal effects boss
Aur kahan par milega
Boss pwede b ung urea nitrogen fertilizer 46-0-0
Oo paps basta 46-0-0
@@erworkxz3487 thank you boss gob bless you
Paps ilang minutes bago lumitaw yung crystal effect?
Basta matuyo lang po siya mas maganda sa sikat ng araw boss para mas mabilis
You mean 46-0-0?
Cara buat nye macam mana
Sir tanung k lng po mgrereact po b ung urea s metallic silver
Oo boss usually gamit ko tlga mettalic silver
@@erworkxz3487 4 hours n sir hindi p din ng react eh hehehe
Sir mgkano pagawa sayo fender ng zoomer x
Bosny metallic silver lng kc gamit k sir
Naku wag ka mag delata na pintura d kakapit ang eurethaine paint
Ginawa Kona Ang pag mix Ng urea atsaka diswashing licquid
urethane paint ba yan boss ?
Oo boss urethaine lang gamit ko
Please mention your painting gun name and details
F75 omega only ibuy here in philippines
But i use now euromax a100 gun only cheap gun i use
Saan nakakabili ng fertilizer pad
Sa handyman boss meron sila
Boss kht urethane paint gagana b yn
Oo paps eurethaine lang ginagamit ko
Anong klaseng fertilizer Yung Ginamit mo salamat po s sagot 👍😊
Urea 40-0-0
Saan nakakabili nun
Sa mga poultry or sa mga nagtitinda ng mga halaman boss
Salamat 👍😉
Ganda ng gawa nyo 👍
Opo sir kaya nio po din yan
Uubra kaya samurai paint dyan boss?
Oo boss ubra naman siya meron din samurai na activator ng crystal effect
ampanget po kasi ng outcome ng crystal effect ng samurai, ang mahal pa , maliliit ung cracking eh
Ay ganun po ba mas ok paps ung urea fertilizer madali lang naman siya timplahin eh
@@erworkxz3487 ginawa ko na din sir kaso parang pinagpapawisan lang ung fairings di po gaano nagbibitak eh, ano kaya problema sir?
Ah dpaat po may araw boss mainit ang panahon kc pag malamig d po tlga mag crack
Loc po pwede mag pa repaint?
Marikina po boss
San po sa marikina?
Conception lang boss malapit sa mcdo tapat ng simbahan
Boss gumawa Ako Ng gnan Hanggang ngaun h d pa nag rereact ptuling nman lodi
Boss dapat mainit ang panahon ung may araw tas mainit sa lugar nio kc ngaun tag ulan na eh
Pwed po ba gumamit ng metallic silver sa 1st coat?
Pwed din po ba gumamit ng ibang kulay instead of black? Like grey..para mas tumingkad yong pang last na coat?..
Tsaka need ba tlaga candy sa last coat or pwed din mettalic?..metallic lng kc available ko
Sana mpansin nyotong comment ko..salamat.
Pwede naman po pero kailangan po candy kc masyadong makatawan ung mga mettalic colors kaya mawawala ung crystal effect nia at magiging plain lang po siya salamat po sa comment
pwede po pylox paint sir??
Pwede boss pero d ko lang alam kung tatalab ung crystal nia
46 0 0 cgro sir. Wla akong mkita na 40 0 0. 😅
Meron boss sa handyman nakakita ako try mo
40-0-0 po ba? O 46-0-0 sa shopee walang 40-0-0 sir
Sana mapansin
Meron po ako nabili sa handyman 40-0-0 or sa mga garden na nagtitinda ng tanim po meron sila mura lang naman po yan
Master anong sabon po yung gagamitin kasama ng scatch brite kapag kikis kisin na yung itim na praint
Joy lang yan boss hehe para dumulas lang siya
MAY UREA BANG 40-0-0?
Pa confirm sir kung 46-0-0 kasi sa video 40-0-0
Yes sir 46-0-0 po gamit ko yan kc nabibili ko sa handyman eh meron din sila dun meron din sa shoppe po
@@erworkxz3487 thank you sir,nag try ako knina ndi ko alam bat prang ndi masyado natutunaw yung fertilizer parang mugmog na basa kaya ndi ko na tinuloy, sa mga video kasi walang description salamat sir
Kailangan kc boss mainit panahon eh parq matuyo siya pag malamig naguulan d tlga siya mag react eh
As of now nag try ako ibang urea 46-0-0 nag crycrystal sya,mahirap pala 😂
Ayaw mag cristal.
Ilan Ang gamitin kimikals Po boss pra mag cristalize salamat po
1 is to 1 boss sa plastic cup pero kailangan mainit panahon pag gagawin mo yan need nia kc matuyo
Why would you put your title in english if you're not gonna speak english bro. Thank you for wasting my time.Definitely not getting a follow or a thumbs up. 👎
you tak reti you jangan buat
lods san kau nka bili nang urea fertilizer??
Sa mga bilihan ng patuka boss minsan ung iba meron sila or sa mga handyman meron