Celtic cuff bracelet | how it's made

แชร์
ฝัง
  • เผยแพร่เมื่อ 1 ต.ค. 2024
  • Shop DYNAMIS Jewelry at: www.dynamisjew...
    Follow me on Instagram: / dynamisjewelry
    Visit my Website: www.dynamisjew...
    Like and Subscribe! Enjoy!:)
    Thanks!
    #usa #canada #celticbracelet

ความคิดเห็น • 50

  • @peterrschuck
    @peterrschuck 2 หลายเดือนก่อน

    What is the guage size of the wire you extruded it down too. Nice rolling mill, not cheap are they. Love your work. Why is this not available in your shop?

  • @rosiejambo2197
    @rosiejambo2197 3 ปีที่แล้ว +2

    Intrinsically, a simplistic piece of jewellery; albeit, in this 'Vid' one can see quite clearly, the complexity of each stage the Goldsmith must take. A superb lil' Bracelet that encompasses the hidden talent & progression of finesse of this Historical style:~a well~known piece of Jewellery that has stood the test of time! Thanx for sharing.☺️Rosie 🦓
    (Stay 🦋 Safe ALL)

    • @XPtroper
      @XPtroper 3 ปีที่แล้ว

      The time a goldsmith puts into his work is underestimated on a daily basis. As well as the time it takes to develop the skills needed to begin with. It's sadly something most craftsman have to deal with because so much is based on money nowadays.

  • @StampsBoss
    @StampsBoss 3 ปีที่แล้ว +2

    It is a very beautiful piece. Very relaxing video, too.

  • @chrisadams3900
    @chrisadams3900 3 ปีที่แล้ว +1

    Nice work, calm video to watch as I'm heading to bed.

  • @ShivamKumar-wf5db
    @ShivamKumar-wf5db 2 ปีที่แล้ว +1

    How thik the wire you used was??

  • @sergente1
    @sergente1 8 หลายเดือนก่อน

    Can you melt the End with a hand torch

  • @stagediver
    @stagediver ปีที่แล้ว

    whats the green thing? is it acid?

  • @joonaskekoni2867
    @joonaskekoni2867 ปีที่แล้ว

    BTW: You do not need to solder. Just wrap the ends. You do not need to have rolling tool, you can use premade wire and just hammer it together. You do not need drill. Polish can be made by hand.

  • @alejandro24cal
    @alejandro24cal ปีที่แล้ว

    Could you do a tutorial on how to make the bracelet you are wearing? I love your work I am your fan. Please do not ignore me

  • @thomassawyer5565
    @thomassawyer5565 2 ปีที่แล้ว

    Love watching you work, everything you make is beautiful.

  • @kichchasachin4634
    @kichchasachin4634 2 ปีที่แล้ว

    Which gaze

  • @raajeweler6569
    @raajeweler6569 3 ปีที่แล้ว

    Eye Love the essence of the twist.....
    BALANCE SERENITY

  • @oskargrzybowski1280
    @oskargrzybowski1280 2 ปีที่แล้ว

    How much grams of silver did you take? :)

  • @Sylvieflam
    @Sylvieflam 2 ปีที่แล้ว

    I love Watch int your work. What is the diameter of the wires?

  • @kichchasachin4634
    @kichchasachin4634 2 ปีที่แล้ว

    Weight

  • @Lake.L
    @Lake.L 3 ปีที่แล้ว

    오 이렇게 만드는구나 처음 봤다

  • @91bartley
    @91bartley 3 ปีที่แล้ว

    How do you get the end to bead up clean like that ?

  • @kiyosodlab2727
    @kiyosodlab2727 2 ปีที่แล้ว

    Good workmanship

  • @tbechtx
    @tbechtx 5 หลายเดือนก่อน

    Beautiful ‼️

  • @heddaacevedo
    @heddaacevedo 2 ปีที่แล้ว

    Beautiful work…love it ❤️❤️❤️❤️

  • @terrymoser2028
    @terrymoser2028 2 ปีที่แล้ว

    Making it look so easy. Not a lost Art! Dynamisjewelry inspiring!

    • @ScottRedstone
      @ScottRedstone ปีที่แล้ว

      Drawing silver wire through the plate is not as simple as it appears. It requires proper annealing of the wire, getting it started properly and liberal use of wintergreen oil to make it slide smoothly. I've had lots of drawn silver wire crack. Might be easier to buy the silver wire in the diameter you need. Also wire mills are expensive.

  • @mnaira4873
    @mnaira4873 2 ปีที่แล้ว

    Beautiful work👏👏

  • @fredkrol932
    @fredkrol932 ปีที่แล้ว

    Beautiful!

  • @hocmuong28tv89
    @hocmuong28tv89 3 ปีที่แล้ว

    💕💖💋👍

  • @200sway
    @200sway 3 ปีที่แล้ว

    I really like this piece

  • @deepeshshah8513
    @deepeshshah8513 3 ปีที่แล้ว

    Which chemical do you use to colour it black please tell me.?

  • @DaHighRoad
    @DaHighRoad 3 ปีที่แล้ว

    Wouldn't the metal be softer longer if you didn't quench/temper it???

    • @XPtroper
      @XPtroper 3 ปีที่แล้ว +1

      The metal is not tempered, this is usually only a process used on an iron alloy. The quench is necessary to remove as much energy from the metal as possible so the internal structure stops moving. If you don't quench, the metal will harden again.

    • @AKAxeMan
      @AKAxeMan 2 ปีที่แล้ว

      It looked more like he was annealing it to remove any tension in the metal after moving it in order to keep it pliable.

  • @wasili-vx2zi9qt7r
    @wasili-vx2zi9qt7r 3 ปีที่แล้ว

    👍👍🤘👍👍

  • @patrickmcnelis1520
    @patrickmcnelis1520 3 ปีที่แล้ว

    So good!! True Master.

  • @القاضي-د5ث
    @القاضي-د5ث 3 ปีที่แล้ว

    Good

  • @AKAxeMan
    @AKAxeMan 2 ปีที่แล้ว

    Is this piece available on your store?

  • @joandorsey2242
    @joandorsey2242 3 ปีที่แล้ว

    Fabulous. Soooo beautiful.

  • @lenincortez1279
    @lenincortez1279 3 ปีที่แล้ว

    Guauuuuuu

  • @jacobmata6638
    @jacobmata6638 3 ปีที่แล้ว +1

    What do you use to whiten the silver after the fire?

    • @TheMayflowerPilgrem
      @TheMayflowerPilgrem 3 ปีที่แล้ว

      The white color is an effect from the pickle solution, it rubs off.

    • @jacobmata6638
      @jacobmata6638 3 ปีที่แล้ว

      @@TheMayflowerPilgrem I know, but the green liquid that is in the heater with lid, that liquid I want to know what it is, I know that it is stripping liquid, but I want to know what solution is

    • @TheMayflowerPilgrem
      @TheMayflowerPilgrem 3 ปีที่แล้ว +1

      @@jacobmata6638 the stuff in the crockpot is pickle. The stuff he blackened with is called liver of sulfer.

    • @jacobmata6638
      @jacobmata6638 3 ปีที่แล้ว

      @@TheMayflowerPilgrem you didn't solve my question, but thanks, nice video

    • @XPtroper
      @XPtroper 3 ปีที่แล้ว +3

      That white color is pure silver left after the pickle desolves the copper in the alloy. For a pickle there are several options, although sulfuric acid/vitriol is usually the working agent in the solution. The most used kristal form is vitrex powder, which is desolved in water to create the solution. Sodium-aluminium-sulphate can be used to create a toxic fumeless solution, but it works slower. The solution is colorless when you make it, when is get's saitisfied with copper, it turns green.

  • @bake162
    @bake162 3 ปีที่แล้ว

    Nice piece!

  • @DaHighRoad
    @DaHighRoad 3 ปีที่แล้ว

    What do you use in the tumbler to polish?

    • @Makermook
      @Makermook 2 ปีที่แล้ว

      Stainless steel shot and dish soap.

  • @francescoharrer4171
    @francescoharrer4171 3 ปีที่แล้ว

    Super man

  • @sayyedzuber7689
    @sayyedzuber7689 3 ปีที่แล้ว

    WOW GERAT