8.5 Tools to FAKE being a good woodworker
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- There is nothing wrong with faking it till you make it. These are my favorite tools to help up your skills and create awesome finished products.
🔴 Want more? Watch Next:
Beginner Power Tools: • Woodworking POWER Tool...
Beginner Layout Tools: • Why is woodpeckers so ...
Dust Collection Basics: • DUST COLLECTION - Basi...
🔴Products Featured in Video
Toggle Clamps - amzn.to/3v20YRc
Kreg Miter Bar - amzn.to/3WjIQxQ
Collins Spring Clamps - amzn.to/3V42ltl
Bessey Strap Clamp - amzn.to/3V5Pref
Vacuum Templates - www.izzyswan.c...
Slab Stitcher - www.slabstitch...
Doweling Jig - jessem.com/pro...
Dewalt Trim Router - amzn.to/3I0i7Tl
Fast Cap Tape Measure - amzn.to/3WqCmNW
🔴Support LSWW
Merchandise: www.lincolnstw...
Stickers: www.lincolnstw...
Plans: www.lincolnstw...
Subscribe: / @lincolnstww
🔴Follow us on Instagram:
/ lincolnst.woodworks
You've quickly become my fav wood youtuber. I bought my 1st table saw a while back and I'm learning so much. Channels like Pask are jaw dropping inspirational, but at my current stage less practical. Youve made a lot of this accessible. Thank you!
As someone who has been watching creator content for many years, it’s so nice to see a channel that is fresh, unique, and isn’t actively trying to ape established creators. If I have to hear someone say “I turned my attention to…” one more time so help me god
Thank you - that means a lot
Lmao. I thought I was the only one. 😂😂
Everyone does the same thing. I used to love certain channels but then they have turned into a wood workers QVC. They are just selling something.
It’s great to see someone different
I know right! This guys amazing
the way this guy talks, you'd thing "youtuber" and "video" were racial slurs
Fantastic videos. The best feature is you get straight to giving good information in a concise, accurate fashion. No spending 3 minutes telling us why we need this info. I hate the other videos that waste my time. I already know what you're going to tell us just from the title. Great job!
Seriously it’s incredible how quickly you’ve gained a ton of on camera charm and confidence. Keep it up I love all the videos!
Thank you! much appreciated. Yes those early videos were roughhhhhhh
#1 tool to fake being a good woodworker. A no limit Visa card. 😛
I’ve started making my runners out of used heavy plastic cutting boards from the thrift store. Usually under a $1, slick for travel through the slot and I haven’t experienced any of the season movement I did with hardwood.
Great tip! 👍
I’ve done this a few times too. They work great
Genius
Hey dude, new woodworker and I just found your channel. Just wanted to say thanks for breaking this stuff down so simply - I watched your finishes video and it immediately demystified the wall of finishes I see at the store.
I cook a lot and your videos have a very America’s Test Kitchen-ness to them - simple and to the point. Subbed and looking forward to more, thanks!
LOL, I thought I was the only one that measures "one line past the big line"!
Nailed it on everything. A previous video you advised the fractional labels on the tape measure, what a head slapper. I went straight out to the garage to see if the tapes that are bright enough to see from the ISS (or from anywhere in my garage) and stay extended until recalled were going to make me want to hang my head in defeat for not having the biggest advantage I didn't think to look for. Nearly dizzy with relief, success, fractions to the eighths (good enough). Now I dont have to feed all 6 to The Sarlacc. Love your content, keep killing it.
Absolutely agree about the Dewalt router. It is bar none the best of its class. Like most shops (pro or not pro) we have numerous routers, including PC, Festool, Bosch and Makita. I use the dewalt more than all of them for everyday work. We did buy the circular base for it, which I find makes the router a little more nimble. We also have the plunge base, and the two dust collector attachments. Annnnnd, we have the 20v battery version. If anyone who reads this is on the fence about the battery vs the cord… get. The. Cord.
Thank you for your wonderfully paced and whimsical videos. I have to say though, that I don’t like the click-baity title here. These are all professional quality jigs, tools and suggestions. They’re things that I use every day in a professional shop. Well, maybe not the cute puppy paws… Your observations on production and repeatability are spot on.
Anyway, thanks again for an enjoyable view, and keep it up!!
I have the Dewalt trim router and I love it. I also use Fast Cap tape measures, but mine are 5 meters. I am in the US, but I have switched to metric in the wood shop. It is so much easier. One of my tapes is a flatback. Since the tape is perfectly flat, it lays flat on the work. I really like that one on the bench.
The fastcap metric tapes are essential if you use the 32mm system for cabinets
I bought a flat back tape measure but I’ve noticed the end pops up when I pull it taught. Subsequently it moves the tape down a small fraction. Does this happen with yours?
@@IndianaJBird I never pull mine taut. I use it on the bench almost exclusively, and I start by laying the 100 on my begin point, subtracting 100 from my final measure. I tested tautness today, and yes, it does lift a bit. I have a couple of Fastcap's non-flatback metric tapes as well.
Another 9 minutes of well-thought-out discourse on craft as it relates to tool acquisition. I learn something every time I watch your videos, and usually, I watch them twice in a row, then go back when I need to remember the finer points. Thanks for continuing your excellent output!
6
6
His content always blows me away. Always original. Always learn something new and useful.
Thank you Harold - truthfully comments like this make 10000 of the shitty comments mean nothing. I appreciate you more than you know
Good/great tip. Personal opinion: *Runners*? Cut up cheap kitchen chopping block, same plastic, much cheaper.
*Battery*? extension leads last longer, weighs less, less room, cost less.
Really like the video. Just a suggestion about the measuring - switch to metric, it's SO much easier. I'm not a fan of metric in all other areas, I'm old school from the UK and my dad was a joiner but we both use metric for measuring.
I use metric because being UK based I basically have no choice, but I grew up during the time when the UK was switching from imperial so am ok with it and quite often find myself roughing out in feet and inches because I find it an easier system with which to guesstimate stuff, especially on site. I'm kinda on the fence about metric for fine woodworking even though I use it every day. The mental arithmetic isn't as simple as it can be with imperial and when designing stuff I'm often found hunched over the workbench with a pocket calculator, grimacing at the fact I've yet again ended up with fractions of a millimetre. Marking out and designing is so frequently about finding the middle, or equal divisions of something. A system that is literally based on the halving and doubling of fractions imho has clear advantages and I do frequently find myself a bit jealous of the ease of use that is obvious when watching US woodworking TH-cam channels.
@@blackworx The only woodworker I know of off hand that uses metric for wood is Dennis from Hooked on wood. All the rest, UK included use sae measurement system.
I want to do this but in the US wood is milled to SAE. I guess if I milled my own stuff that wouldn’t be an issue. I still have to contend with the fact that my brain thinks in inches. I don’t have any idea how long an 80cm table is intuitively. Whereas I understand immediately what 3 feet is. It would be a lot of work to shift over mentally and I would still be living in a world where everything around me is SAE.
@davegravel3740 the only youtube woodworkers I can think of outside of the USA all use metric. European channels barely even acknowledge imperial measurements.
The whole point of metric is to eliminate the various subdivision scales of different measurement types and have them all follow a common base unit, e.g. decimal.
Makes calculations in STEM subjects so much simpler to know that all measurements can be scaled to match each other by adding or removing digits
I just love the humor you inject into your videos. And thanks for some great tool ideas. I already have the Fast Cap tape measure and am really happy with it. The same for the DeWalt trim router, although I still need to get better at using it.
I think the only time 9 minutes has passed by faster is when I hit snooze on my alarm! Another great video Jon! Very entertaining. Your pacing is top notch! Love the shout outs for the small businesses. Even threw in the great @ScottWalshWoodworking.
I have to say, you have quickly become my favorite TH-camr! I appreciate your no bs approach and good content.
Thank you David - I appreciate that
I love your videos so much. I’m a beekeeper turned woodworker in order to make beehives. One thing leads to another as they say. Your videos make me laugh and make me feel welcome to this new adventure because of your sense of humor and your content and approach. I’ve learned some really really helpful info from you and these tips for faking it until I make it are perfect!! That strap clamp looks perfect for assembling all of my bee hive box components.
One tool I never see mentioned in any top tools videos from the channels I follow is a clothes iron. As an example, ( though I do love the splines you add ), those indents from the wire spring clamps can be ironed out with a damp cloth.
very true!
All good recommendations. I like the Kreg runners as well. Also, you can buy a larger one and cut it into two smaller ones. I made a big crosscut sled, and I have two smaller runners for another, future sled. The aluminum cuts easily with a chop saw.
Yep - I do the same thing. Definitely worth the price
I enjoyed that markings on the tape measure. Makes me glad to live in a metric country. All jokes aside, what a great video - as always! Much appreciated. Thanks.
My god, that's the first time someone has pointed to a video in the corner and the link actually appeared. Strong work!
Great vid. I can't recommend the Jessem dowel jig enough. Super easy, super accurate, and a GREAT company. I bought mine a few years ago right before Christmas. I wanted it as fast as I could get it, because I'm like everyone else. They were actually closed for the, I think a week or two, during the Christmas/New Years holiday. There just happen to be a guy who went into the office to get something he left. He heard the phone ring, picked it up, took my order, and gave me next day shipping for price of normal as a Christmas gift to me. How awesome is that?!
I am an amateur at wood-working, but I also decided to invest in the Jessem Dowel Jig, and I must agree, it is really nice.
It cost a fair bit for basically a dowelling jig, but when I got it in my hand the first time, I immediately knew it was worth the money. I have managed sofar to do a fair amount of joints with it, and every single time I was satisfied with the result.
The precision machining on that jig is really beautiful to look at too.
I love that Adam Driver has a woodworking channel.
I thought it was the original guy from Blues Clues.
Completely agree about the Makita palm router. I think the battery operated router does have a light. Jessem has an incredible router lift.
I have had that tape measurer for three years and never noticed it had a pencil sharpener! You can also write in pencil on the white area to remember a number and it erases cleanly
The Fastcap also has a paper-like side you can write on to record those measurements. Use mine constantly! I too am tired of my Makita router - Dewalt here I come! Thanks.
@8:43 I *LOVE* their flat tapes. It takes parallex out of the equation and you never have to rock the tape to make sure you're marking the right measurement! Also, it's so ironic because as a DeWalt guy (mostly) I got the Makita trim router due to it's size. But It's really for chamfer/rounding so I guess I can't complain too much.
For the record, in the first video that you measured the first little line after the big one, I laughed so hard and have never felt so called out in my life. This coming from a woodworker who was raised by and around carpenters, construction workers, and tradesmen. There might be some correlation to the fact that I only became a "hobbyist"...
There's no better way to start a long day in the shop than with a great woodworking video from Jay Baruchel!
Thank you Jay!
@@Lincolnstww nothing but love, of course. Your channel is an inspiration for guys like me to keep working at this hobby and hopefully turn it into a career.
Love your wit and knowledge.
"spinning death ball" Gosh, I love this! Great video!
I can’t tell you how many times I’ve posted a link to one of your videos. This will be another one. Thanks. I appreciate your work.
We need more of that summer sled guy.
hell yea!
that trim router from dewalt is an absolute beast. The DWP611 has been running on my CNC for over 3 years and when it dies I swap the brushes with some Amazon specials and it fires right back to life. If it died today I would immediately go buy it again. I can't say enough good things about it. I have hundreds of hours of run time on mine.
You showed a strap clamp example of a box and I always have trouble using a strap clamp for that. I see you're using a couple other techniques. Could you show us sometime? Thank you for your hard work and sharing your knowledge!
I love your videos and you have a great sense of humor!
I can appreciate the reasoning behind the abrupt video endings (and that you make them at least mildly entertaining), but dammit, I always have to hit the back button to come back and click like 😂 #itsthelittlethings
Great info. Thanks so much. But I’ve used the tape measure with the printed measurements. I always make mistakes. Lol. I’m old school. 65. Thanks again. Your videos are awesome.
I finally finished my 3' ft. diameter Death Star and it is quite a hit with my friends and family. Thanks for sharing your idea.
Those plastic dead blow hammers are some of my favorite. I teach for them over the sledge or framing Hammer when all the time.
It says a lot of your work when my first thought on seeing this in my feed was "Oh, I am going to like this!" And I did! Happy holidays to you and your family!
Thank you, Rich! Happy Holidays to you as well!
Omg the puppy is adorable!!!
Love seeing you hype up Izzy Swan. He's a legend and fewer people know about his work.
a legend indeed
@@Lincolnstww I still need to get one of his DPT wrenches.
th-cam.com/video/cLQnDCRjXhg/w-d-xo.html
Just found your channel and was in the middle of binging when I realized you’re in the same area as I am. Love the channel and the content. It’s already helping me decide I’m ready to start stepping up my projects. Keep it up
Thanks!
When I did framing and sreel roofing by myself and had to recall several measurements from up there to the ground and make cuts I often just remembered one line past half, or two past the third (3/4), etc. If it works, you're good! And if not, measure once, cut twice!
Congrats on the puppy!
Right to the point no filler THAAAANKS !!!!
I came to find out how you fake being a good woodworker but there was nothing fake anywhere...
Honestly these are legit techniques, especially for beginners, and the video is really well presented
Please consider making a video on picture framing and the jigs used, etc. Very helpful videos.
I enjoy these tool videos because woodworking is primarily a marvelous excuse to buy more tools.
Great video and congratulations on your new puppy!
Love your videos and your humor. Keep making them.... helps hacks like me get better.
Excellent work on this one jon!
I so appreciate what you are doing. Making something decent in woodworking is hard enough without having to deal with all the issues of maintaining/creating a TH-cam channel. I am lucky to work on projects once a week. My day job does not involve using a tape measure. Using less brain cells on remembering if I said 12 1/4 inches or a foot and a quarter, oh wait that was 1/8 mark...right? Measure again...why was I cutting this piece...is a good thing.
Thank you!
I bought the Fastcap tape measure and what a difference that made. I huge upgrade from the older ones I had. Ready to replace the others with Fastcaps.
Love your videos. Informative and entertaining. Keep up the great work.
Thanks for being fast. I can watch you on normal speed, unlike these other jokers online.
another great video. thanks man.
Just find out your channel and loving it 💜
1:00 So this. Router kickback. I used a router for four different DIY projects I was doing, and the last one was a pair of speakers (Living room theater subwoofers). During this final project earlier in the year (Around the time this video came out actually), the router, which I didn't have a table then, kicked back at me. I was fearing for my life. I legitimately don't think I've ever been that scared, and I got Portland Cement (powered) in my eyes last summer, which caused some bad eye damage lol.
I bought a router table back in March. I have yet to use it because God damn. That was the moment I learned that "You actually cannot go the wrong way with the router". And I am so glad I did not mess anything up on me, but that was the scariest moment in my entire DIY path.
That fast cap tape measure is the only one I buy now but it’s not because of the markings or the pencil sharpener, it’s because it’s a lefty-righty tape. I’m right handed (as are most people) so I hold my pencil in my right hand and tape in my left to mark my work piece. With most right handed tape measures this means the numbers are all upside down when you hold it with your left hand. This is why I use a lefty-righty tape.
In case ur wondering, 16ths are called "Teenies." E.g. 5/16ths = 5 teenies. A professional stair guy I met measured in half teenies (1/32nds) for high end custom treads & rail parts for truly picky clients.
Another video that held my attention all the way through about a hobby I don’t even do. Great pacing as usual, your AVD stats must be killer.
Ha! thanks for being here
I second the Jessem dowel jig. I've got one and it works as advertised.
Thanks once again for another entertaining & educational video. For me, your jokes and quips are hilarious - I never know when another crack of humor is coming, so I'm zoned in so I don't miss anything (I know I can play it again, but what the hay, it's always better to catch it on the first time around). Keep up the great work. You are one of my favorite channels.
Thank you so much. Glad someone finds me kinda funny - I find myself annoying!
Just stumbled across your site and I like your reality of woodworking concept, most of us won't get farther than an occasional project with tools from HD or Lowes! Gonna check some more videos out though before I subscribe.
Your video are getting better and better. Thanks!
To all that complain about your measuring. Go stuff it 😎
Thanks for great content 😄
Pretty cool stuff. I started off with a corded makita palm router with a plunge base and had no issues with it and can still appreciate it. I got a dewalt 20v with a plunge base and that thing is awesome! The light is absolutely a necessity now, the adjustments are much easier, the dust collection option is superior in the positioning of the port, and the plunge locking/ unlocking lever is much more intuitive than the makita. I am looking at getting a second dewalt since I do alot of high volume batches and it would be easier to just swap routers instead of bits and that is best achieved with no cords. Ultimately what I'm saying is get you the 20v dewalt with a plunge base lol.
Great video. Just starting out and your channel has been a great help.
I own two of the FastCap Left Handed Lefty/Righty tape measures and they have become my favorites. I was not able to find them offered at Amazon. I found them at a local tool retailer near Chicago.
Dewalt 611 is what I have in my cnc. Good little guy.
So dry, deadpan, and hilarious. Excellent video, informative and entertaining 😘
Your puppy looks EXACTLY like my puppy looked when we first got her! (Oh...and as a side comment, AWESOME video as usual. Looking forward to seeing you at WBC2023. I'll be working the Expert Desk one day there.)
a great tip for minimising measuring and marking mistakes is called the metric system.
100% agree with the Fastcap tape measure comment… sure, I can read a traditional tape measure given enough time. It’s just so much easier on the Fastcap. And the have measurements on both sides of the tape!
The favorite jig that I dance to is my Leigh D4R PRO but agree that jigs make the best investment of time and money.
Great ideas, but the imperial unit tape is the funniest thing outside USA :D
I'm a Makita guy as well. I have their trim router but bought the Milwaukee trim router because the adjustment is just better than Makita's.
The working outside move is a great idea. I made an outdoor workbench and love it for sanding or grinding steel or just extra room for glue-ups.
Links for products mentioned in this video
Toggle Clamps - amzn.to/3v20YRc
Kreg Miter Bar - amzn.to/3WjIQxQ
Collins Spring Clamps - amzn.to/3V42ltl
Bessey Strap Clamp - amzn.to/3V5Pref
Vacuum Templates - www.izzyswan.com/Store/Vacuum...
Slab Stitcher - www.slabstitcher.com/
Jessem Doweling Jig - jessem.com/products/dowelling...
Dewalt Trim Router - amzn.to/3I0i7Tl
Fast Cap Tape Measure - amzn.to/3WqCmNW
Cute puppy. Come see our corgi puppy on my videos.
The Toggle Clamps are unavailable. Can you update the link as it looks like others are available.
@@billme372 thank you!
Any particular reason why you choose corded version of Dewalt trim router?
Appreciate your comment re: router table. As a 20+ year hobbyist, that thing still scares me. I have great confidence in my table saw skills…which is gonna land me in the E.R., no doubt😂. I have been seriously rethinking my safety strategies. Been making/using jigs a lot more. Thanks for another great vid!
Yeah theres something about the router table that makes uneasy. But I dont feel the same way about a normal corded router. I think im going to do a safety video soon. I did so many things starting out that make my sick knowing what I know now
Weird, statistically and spec wise tablesaws are the most dangerous tool by far, especially in America because so many American woodworkers don't use a shoe and anti kick back splitter, and no emergency turn off
Saving this vid for future purchases.
Simply put: Brilliant, Fun, Concise, Clear, Informative, Useful, and Entertaining CONTENT!!! Thank you!
By the way: why Hollywood or TV Networks haven’t yet discovered you bewilder me. 😜
I bought the DeWalt cordless router as an early Christmas present (read: Black Friday impulse buy ) and you’re right it’s the bees knees. I’ll chime in also, I enjoy your content and approach. Nice jab at affiliate marketing!
Nice to see another GVL artist. In the /s spirit of your channel, keep up the above-average work! 🙂
Thats why I use plastic runners... they are stable, cheap and easy to work with
Jon my friend you are killing it with your videos and as someone who has carved many signs by hand with a router I agree the dewalt is the best trim router and I have tried many.
Thanks tiff!
+1 on the Jessem dowel jig. Mine arrived a few days ago and the quality is superb and it provides excellent results.
"one line past the kind of big line" ROTFL. Thanks for that!
I love watching your youtube channel sir
GOOOO Milwaukee!!! Great video.
Thanks for your recommendations. I'll be buying a good number of these. One day I'll be a good woodworker!!!
For the pecker pinchers, you can use some temporary adhesive like two sided tape and thin sacrificial offcuts to protect your wood from the bite marks.
Pp! Lol. We're 12.
Awesome! Any tips on where to get 1/8 thick material for splines for mitres? I'm "woodworking" on reinforcing a small stand.
Lights on my Makita trim router I want those. I am also with you on the adjustment on the Makita trim router. I have a bunch of DeWalt gear, additionally some Bosch, and some Makita, I didn't notice a DeWalt trim router when I bought mine about five years ago.
You forgot to mention you can make notes on the Fast Cap tape measure face! I write on it all the time.
To get around my issues of using Imperial tape measures, I use metric where possible. Yes, born and raised ‘merican, but it’s just must easier for me to quickly identify precise measurements
You consistently put out the sharpest content on TH-cam and this is no exception. Trust is the word that comes to my mind and I’m now going to pick up the dewalt trim router. Plus likely a couple other of your recommendations that I actually need.
No bullsh-t is right but you’re more than “a little funny”. Keep up the cuss words. It really helps narrow down my decisions.
Thank you! appreciate the kinds words it means a lot. You will love the dewalt