As a quick lane worker for a dealership it's a tad different for us... we work by ourselves do all our own work... only issues I personally saw were they didn't torque the wheels or check either air filter cabin or engine also didn't see coolant checked. But honestly some of these comments are nitpicky as I'll get out lol... "Didnt check tires for cupping or punctures" they did... tire pressure was good so no need to look for a puncture and he checked for cupping while doing the tire tread... true that they didn't check both front brakes that was missed but a lot of negativity for a couple of mistakes while the GM videoing may have put pressure on them might not have idk but don't be jerks to be jerks either... lastly everyone is like why are they trying to do it so fast obviously there is a camera and second you only have 30 minutes so if something were to happen (tire nail, oil pan leaking, tire rod ect) they need to have extra time to do that too in the 30 minute appointment window
So far this team has only measured the right side of the vehicles brakes, brakes do and can wear un even from left to right. Second tire pressure was checked and tread depth but no inspection to tires for nails , punctures, or cupping. lastly under hood was checked but never once was air filter box open to check condition . Speed isn't always good with fine tuning tho better job can be done .
As2684 some engine air filters are built as part of the "box" so it's 10x times more difficult to rebuild in a quick manner and much harder to do the snap a few clips, also for a quick lane service under 30k most if not all filters, brakes, tires are in green to moderate "yellow" condition.
Terrible inspection lol You guys could use some training. With a 2 man team it is possible to do a MUCH better inspection with a rotate and oil change in 15 mins or less. Proper training and orginaziton is key.
I fucking hate lube techs that act like they're mechanics. This is the equivalent of changing a light bulb and yet there's people saying they're doing it wrong. Bitch, drain the oil and put new oil and filter and get the car the fuck out of there. Got more important things to do. Stop making it seem complicated in the chat because you have been a lube tech for a month. A 6 year old can do this.
I work the same quick lane, but in a different state and area, I don't know if these two are hourly or flat rate pay but man do they over do the whole macho me beovado style... Also check all calipers and pads, mostly the inner break pad!
That’s gravy but wait till you approach one the same year with punctured tire on the rear and let the writer know for the customers safety on the rotation which needs approval from customer then you came across all 5 swollen lug nuts on ALL 4 tires and the 19.5 socket won’t do the trick so hammer time then you realize that the writer sold a puncture tired repaired that wasn’t leaking than you come across stripping the lug nuts cause the 19.5 socket didn’t fit so now you need to use a special socket to take them out cause the writer sold the lug nuts as well then after repairing the tire you put everything back together and now you need to lower the car and finish the rest and customer drives a couple miles away from lot and it comes back because the shield is flapping cause the plastic that holds the screw and fender in place is ass and fell after leaving lot which isn’t no ones fault so you need to raise it back up with a jack or lift cause it’s a low car and it’s on the far end of fender to replace it and is a tight squeeze and then you are finished. But wait there’s more you realize you killed more time then beating the flat rate or nearly made it but if you get paid hourly you still get chewed out cause it goes straight to the service manager. Now you better have that car as easy as this video if you get paid hourly cause you don’t want to hear big poppa.
I despised this two man team shit because I like to work alone. The reason is because you know what you did to the car and didn't. You have control on the other hand tou have no control of what the other guy is doing. So, usually if something does wrong they both get burn. And this is not the correct training to become a professional lube tech, let alone a mechanic.
They really aren't going all that fast, and if you watch them are performing different jobs as their own work. I've done two tire installs in 15 minutes on small dinky cars by MYSELF with paperwork included. When you become experienced it's about a routine. And pretty much all cars have the exact same routine for basic services.
I agree. I don't like the way they were rushing around to do things! I don't know if that was just because they were being filmed, or the guy running the camera is the boss and a real prick to work for!
no oil filter and a nice ding in the drivers door. and no rear brake check or air filter check. wouldn't go here. I mean it is a ford but it still needs to be checked.
Sir, I just blew up your motor, sir!!! And left a loose tire because I was rushing as shit. But don't worry, next time you come to visit for your next service we will give you a complementary air freshener, strawberry scent courtesy of our shop. It doesn't get any better than this, huh? Don't forget your coffee and cookies on your way out 😂😂😂
Ok man ive been at a shop for 2 years i pull it in check lights do all the topside inspection put the oil cap in the hood latch that has saved me a couple times then go up to chest height check tire pressure go up enough to get under it change oil and underside inspection if the wheels have to come off i do that after i drain the oil and let the oil drain while you do your rotation then raise it up and finish up the oil change just take your time going this fast like in this video can cause you to make mistakes that could be very expensive
@@jacobabernathy7312 thank you because what I’ve been doing is I check the lights I pop the hood look around try to look for any thing on usual with the tubing in the wiring after I left the car and I just started to check the shocks while is a chest height. And as soon as it gets above my head I try to take off the splash shield and start doing the checks and that time I’m checking all four axles and tie rods brake lines emergency brake lines and start taking off the tires . But one of the advisers told me just as soon as you pull it into the bay fill the tires first then do the hood last so I’m getting tips all over the place and I’m just trying to find what works because the first time I did it I was such in a rush that my fingers got caught between the spoke of the wheel and The brake caliper all I heard was a crunch in a snap but there is no time to stop I just have to keep pushing to finish up that car before the advisers ask me why am I taking so long . But I’m going to try what you said because at this point I’m trying anything I can to make that 30 minute mark
Ya i do it constantly every day but some things you might have to figure out by yourself what works for me might not work for you i had to take tips from all of the techs when I started combined them together and found what works for me it all takes time and experience
I'd rather work at my quicklane than this one lol. Yeah we work 10+ hours and only get a 30 minute lunch but we don't have to rush this bad and we can really inspect the vehicles 😅 or maybe I'm just a slow person which I'm fine with lol
Ok I’m not really trying to talk bad but this is a good example how mistakes happen by rushing yes some may say they are “professionals “ but let’s be honest even the master techs make mistakes sometimes... I rather have a customer wait 40min-1hr knowing that their car is being taking care of with time not being rush.
tuberman93 axb I work in the quick service lane, And thats because theres a good chance theres about 10 cars in front of you and or 2 or 3 techs available, theres a good chance the cars in front of you had an appointment, or an extra service (tire balance, m+b, air filter change, etc) plus we have to do an mpi for every vehicle top to bottom which takes a while.
they are only working that fast because its on video for the dealer if it wasn't they would say fuck it and work slowly like usual they are express techs they don give a fuck about you your car or if you are waiting
This hurt so much to watch idk why, just watching them try so hard to be fast. its all about effiency not working fast. for example: drain the oil and then rotate the tires while its draining. and after you get the wheels back on fill the tires. when i was a lube tech by myself id get an oil change and rotate done in 12-20 minutes.
Michael Agosta I’m the same way but while the oil is draining I fill up the tires and check for Bailey and cupping make sure nothing else is leaking then I do the rotation.
Where I go I purposely go to this place I won't mention by name but they are really good they do the oil change and all the inspections takes them about 75 minutes I know this cause I watched them from the waiting room work on my car. I can wait id rather have good employees take there time do things right in a safe manner and treat my car right. No need to go fast
I wonder if he scratched the paint/dinged the door when he opened/banged it into the lift at the 0:27 sec mark? No way in hell I would let these fools touch my vehicle or anyone else for that matter.
We have 2 man team like this too at Toyota in Spartanburg SC #1 in Southeastern verry nice and comfortable dealership lounge noas arch 4 kids a caffè free coffee cookies customers only also ladies day on Tuesday get great service and pedicure for free on ladies day shout out to DAVE EDWARDS TOYOTA
It's is the most irresponsible thing iv ever seen.. I would never let my car or truck be treated like this, if management is making these men work like this shame on you 😡 that's someone's property and your treating it like crap.. never take your stuff here unless you want it treated like garbage 😜, were the love for the customer,
idk, just something about this that doesn't seem right, & I work at quicklane lol yes, we try to to be fast but also check every inch of the vehicle for anything unusual, (& also check the air filter & let the oil actually drain longer) lol
Inspection was terrible.. no air filter, cabin filter, rear brakes, under carriage, wipers, brake fluid, coolant, belts hoses etc was done. Oh well not my car.😜
The guy starts to take off the gravel pad with the car 3 feet in the air. Then moves it up another foot to get under it. Still squatting and looking stupid lol.. They didn’t look at anything under the vehicle (probably because they couldn’t walk under it), they didn’t check all the brakes. The guy mounting the tires definitely needs some training..! I can list several other things that were missed or done wrong when doing a lof/rotate. I can only imagine how many people come back due to the oil cap being left off and other dumb things that should be avoided. You can work efficiently and still do a quality job. Both of those lube techs need better training and the guy videoing which I’m assuming is the boss needs training as well...!! These guys will never move up and make it as certified techs working like that..
Melbourne Paint Correction & Auto Detailing The guy started lifting the car as the other guy was still taking the tires off why not have both guys on each side do two tires and check each brake and rotors like they should have both just picked on side instead of the black guy running around to each side
I hope they didn’t pay for an inspection. Missed inner brake pad measurement. Only measured one part of the tire, didn’t check for cupping, cracking, edge wear etc. on the tires. Didnt check engine or cabin air filter. Didn’t check steering or suspension parts. No battery test. I would be furious if someone just didn’t check that stuff
Geez slow down a little. You are missing things. It’s important to be efficient, but that doesn’t mean to rush through everything. Especially when you are hourly.
many many many failures here. no star patterns when tightening lugs, he tightened the key for the security lug with the impact (big no no) where was the balance for the tires? didn't drain all the oil possibly leaving a quarter of a quart in there. spilled the washer fluid as he was filling it. ect. no not an excellent job. just because you do it quick doesn't mean it's done right. I'd rather wait and make sure my car is done right than someone speed thru everything taking shortcuts possibly ruining parts or damaging my lug nuts.
Garbage. You can tell they where trying to hard to go that fast cause they normally don’t. Also they didn’t check all the brakes, rotors, lines etc, or anything under the hood like hoses, belts. This guys and place are a joke
Jiffy Lube did mine in half that time...Sure they forgot the Oil and my Car Engine blew, but they did it fast.
Lol.. Hahahaha
Who was in the bay?Larry Moe and Shemp?
They have a pit setup so they don't have to lift
Good example of why I do my own maintenance lol
😂😂
You know they don't hustle like that when there's no camera
"oil change complete" DEAD
As a quick lane worker for a dealership it's a tad different for us... we work by ourselves do all our own work... only issues I personally saw were they didn't torque the wheels or check either air filter cabin or engine also didn't see coolant checked. But honestly some of these comments are nitpicky as I'll get out lol... "Didnt check tires for cupping or punctures" they did... tire pressure was good so no need to look for a puncture and he checked for cupping while doing the tire tread... true that they didn't check both front brakes that was missed but a lot of negativity for a couple of mistakes while the GM videoing may have put pressure on them might not have idk but don't be jerks to be jerks either... lastly everyone is like why are they trying to do it so fast obviously there is a camera and second you only have 30 minutes so if something were to happen (tire nail, oil pan leaking, tire rod ect) they need to have extra time to do that too in the 30 minute appointment window
i did see they used a torque stick. but they should have checked the torque with a torque wrench after the car was back on the ground
@@rickretro9693 I believe the air preasure is pre set for the lug nuts.
@markwarnberg9504 that's not what I'm saying. Reread
So far this team has only measured the right side of the vehicles brakes, brakes do and can wear un even from left to right. Second tire pressure was checked and tread depth but no inspection to tires for nails , punctures, or cupping. lastly under hood was checked but never once was air filter box open to check condition . Speed isn't always good with fine tuning tho better job can be done .
As2684 some engine air filters are built as part of the "box" so it's 10x times more difficult to rebuild in a quick manner and much harder to do the snap a few clips, also for a quick lane service under 30k most if not all filters, brakes, tires are in green to moderate "yellow" condition.
Terrible inspection lol You guys could use some training. With a 2 man team it is possible to do a MUCH better inspection with a rotate and oil change in 15 mins or less. Proper training and orginaziton is key.
Jim Smith u all need stay off TH-cam And grow up a
I fucking hate lube techs that act like they're mechanics. This is the equivalent of changing a light bulb and yet there's people saying they're doing it wrong. Bitch, drain the oil and put new oil and filter and get the car the fuck out of there. Got more important things to do. Stop making it seem complicated in the chat because you have been a lube tech for a month. A 6 year old can do this.
Stay in the kitchen
I work the same quick lane, but in a different state and area, I don't know if these two are hourly or flat rate pay but man do they over do the whole macho me beovado style... Also check all calipers and pads, mostly the inner break pad!
Brake
That’s gravy but wait till you approach one the same year with punctured tire on the rear and let the writer know for the customers safety on the rotation which needs approval from customer then you came across all 5 swollen lug nuts on ALL 4 tires and the 19.5 socket won’t do the trick so hammer time then you realize that the writer sold a puncture tired repaired that wasn’t leaking than you come across stripping the lug nuts cause the 19.5 socket didn’t fit so now you need to use a special socket to take them out cause the writer sold the lug nuts as well then after repairing the tire you put everything back together and now you need to lower the car and finish the rest and customer drives a couple miles away from lot and it comes back because the shield is flapping cause the plastic that holds the screw and fender in place is ass and fell after leaving lot which isn’t no ones fault so you need to raise it back up with a jack or lift cause it’s a low car and it’s on the far end of fender to replace it and is a tight squeeze and then you are finished. But wait there’s more you realize you killed more time then beating the flat rate or nearly made it but if you get paid hourly you still get chewed out cause it goes straight to the service manager. Now you better have that car as easy as this video if you get paid hourly cause you don’t want to hear big poppa.
How many people will not take there car to this place.
What do you guys expect it’s a quick lane center. If you want it done right take it to a dealer or do it at home
That's a ford dealer
How was the sticker set if nothing was entered into the shops computer?
Always double check the vehicles level before you lift it. It could fall off
I despised this two man team shit because I like to work alone. The reason is because you know what you did to the car and didn't. You have control on the other hand tou have no control of what the other guy is doing. So, usually if something does wrong they both get burn. And this is not the correct training to become a professional lube tech, let alone a mechanic.
They really aren't going all that fast, and if you watch them are performing different jobs as their own work. I've done two tire installs in 15 minutes on small dinky cars by MYSELF with paperwork included. When you become experienced it's about a routine. And pretty much all cars have the exact same routine for basic services.
No need to be super fast in the lube lane. They are just trying to impress somebody and they end up missing some processes. Lol
True
I don't think I saw them put a new oil filter on or did I miss that
Preach
@@ryans413 I had to go back to check that myself. They did do it, but I dont like they were running around and rushing to do things.
I agree. I don't like the way they were rushing around to do things! I don't know if that was just because they were being filmed, or the guy running the camera is the boss and a real prick to work for!
Maybe this is why Fords are always broken...
So true!
Air filter? Cabin filter? Wipers?
Nice team work
Wow! Such eager beavers!
Yo did they change the oil filter or did I just miss that
Yeah. He blocked the view of him taking off the old one and you can see the new one
Idiot
the shop in Olympia wash. I was there for three hours for a break job I called the day before the shop had to wait for pARTS
I wouldn’t want nobody work on my car moving to quick
they say said pressure up and even look at it.
no oil filter and a nice ding in the drivers door. and no rear brake check or air filter check. wouldn't go here. I mean it is a ford but it still needs to be checked.
They did the oil filter
And they definitely called out the back brakes were drums
Dent when they open the door lol
bro wtf was that LOLOL
i said oop
I tried to watch this video without posting a comment...bet these 2 walk around like they can diag an oil change....
Fast is not good service. I would rather wait and make sure everything is done right.
This is hilarious!!! Horrible service
You know damn well they don't work that fast. All for the camera
Sir, I just blew up your motor, sir!!! And left a loose tire because I was rushing as shit. But don't worry, next time you come to visit for your next service we will give you a complementary air freshener, strawberry scent courtesy of our shop. It doesn't get any better than this, huh? Don't forget your coffee and cookies on your way out 😂😂😂
Sir, blew up your engine sir and left one of your tires loose. But dont worry, next time you will get a complementary window washing coupon.
The tires get completed as soon as you do the rotation
Hi I'm basit car mechanic best experience in Dubai
Why are they not letting car back down some to let lift lock back in place to keep from falling
didnt even check the cabin or air filter or wipers for upselling like what is this even?
Fast service isn’t always good service
I’m new and I don’t have a partner and been trying to find a process to follow on how to finish the car under 30min what would be your tip
Ok man ive been at a shop for 2 years i pull it in check lights do all the topside inspection put the oil cap in the hood latch that has saved me a couple times then go up to chest height check tire pressure go up enough to get under it change oil and underside inspection if the wheels have to come off i do that after i drain the oil and let the oil drain while you do your rotation then raise it up and finish up the oil change just take your time going this fast like in this video can cause you to make mistakes that could be very expensive
@@jacobabernathy7312 thank you because what I’ve been doing is I check the lights I pop the hood look around try to look for any thing on usual with the tubing in the wiring after I left the car and I just started to check the shocks while is a chest height. And as soon as it gets above my head I try to take off the splash shield and start doing the checks and that time I’m checking all four axles and tie rods brake lines emergency brake lines and start taking off the tires . But one of the advisers told me just as soon as you pull it into the bay fill the tires first then do the hood last so I’m getting tips all over the place and I’m just trying to find what works because the first time I did it I was such in a rush that my fingers got caught between the spoke of the wheel and The brake caliper all I heard was a crunch in a snap but there is no time to stop I just have to keep pushing to finish up that car before the advisers ask me why am I taking so long . But I’m going to try what you said because at this point I’m trying anything I can to make that 30 minute mark
Ya i do it constantly every day but some things you might have to figure out by yourself what works for me might not work for you i had to take tips from all of the techs when I started combined them together and found what works for me it all takes time and experience
@@jacobabernathy7312 ok, thank you for the tip I appreciate you taking time to answer
@@81quiroz ya no problem bro best of luck to you in your career
I’m so glad I never had to do this two man team shit when I started. These guys aren’t gaining any valuable experience doing only half the job
In 23 years as a technician, always worked alone..
IT WAST three hous till the van was fixed
I'd rather work at my quicklane than this one lol. Yeah we work 10+ hours and only get a 30 minute lunch but we don't have to rush this bad and we can really inspect the vehicles 😅 or maybe I'm just a slow person which I'm fine with lol
He he he ha
gum s. rubber- stamp hydraulic ,workshop tull box ,air ,fittin ,fitter
Ok I’m not really trying to talk bad but this is a good example how mistakes happen by rushing yes some may say they are “professionals “ but let’s be honest even the master techs make mistakes sometimes... I rather have a customer wait 40min-1hr knowing that their car is being taking care of with time not being rush.
If they go this fast why is it that I'm at the dealer waiting for 2 hours to get my car serviced
tuberman93 axb I work in the quick service lane, And thats because theres a good chance theres about 10 cars in front of you and or 2 or 3 techs available, theres a good chance the cars in front of you had an appointment, or an extra service (tire balance, m+b, air filter change, etc) plus we have to do an mpi for every vehicle top to bottom which takes a while.
Lol it stays parked until the assholes forget that you're waiting for your vehicle 🤣
Because your car is not the only car that’s needs service
they are only working that fast because its on video for the dealer if it wasn't they would say fuck it and work slowly like usual they are express techs they don give a fuck about you your car or if you are waiting
Because other customers are before you tip get there and be the first cause early bird always gets the worm 1000sandly authentic
This hurt so much to watch idk why, just watching them try so hard to be fast. its all about effiency not working fast. for example: drain the oil and then rotate the tires while its draining. and after you get the wheels back on fill the tires. when i was a lube tech by myself id get an oil change and rotate done in 12-20 minutes.
Michael Agosta I’m the same way but while the oil is draining I fill up the tires and check for Bailey and cupping make sure nothing else is leaking then I do the rotation.
Where I go I purposely go to this place I won't mention by name but they are really good they do the oil change and all the inspections takes them about 75 minutes I know this cause I watched them from the waiting room work on my car. I can wait id rather have good employees take there time do things right in a safe manner and treat my car right. No need to go fast
No...
cabin air filter
Engine air filter
Oil level
Wiring
Wipers
Belts
Tubing
....shall I continue?
Do it nice or do it twice
they did not check the air filter
They did check the air filter.
Very scary guys not safe at all...
No inspection lol.
Love all the people who think they know everything but call us "mechanics"
I wonder if he scratched the paint/dinged the door when he opened/banged it into the lift at the 0:27 sec mark? No way in hell I would let these fools touch my vehicle or anyone else for that matter.
No safety checks?
Dont lift car if u change the tire
Dude said "oil change complete" and didnt put a new oil filter lol
i went back and they did replace the filter, just hard to see because they are moving to fast!
@@davidcampbell1899 yeah just saw it too
We have 2 man team like this too at Toyota in Spartanburg SC #1 in Southeastern verry nice and comfortable dealership lounge noas arch 4 kids a caffè free coffee cookies customers only also ladies day on Tuesday get great service and pedicure for free on ladies day shout out to DAVE EDWARDS TOYOTA
I need job in your company
It's is the most irresponsible thing iv ever seen.. I would never let my car or truck be treated like this, if management is making these men work like this shame on you 😡 that's someone's property and your treating it like crap.. never take your stuff here unless you want it treated like garbage 😜, were the love for the customer,
Only one car. HURRY pit crew! That car needs to be back in the indi 500 lol
Confusing mess 😬
They mount the tires wrong...
They should mount the wheels side ways for extra aerodynamics.
Sabrina I ok 🤣😌🤣
Fast work mean bad results.
idk, just something about this that doesn't seem right, & I work at quicklane lol yes, we try to to be fast but also check every inch of the vehicle for anything unusual, (& also check the air filter & let the oil actually drain longer) lol
Like a NASCAR pit crew
lol only moved fast because the camera was on...anything to make thierselfs look good on camera right
Whys everybody bashing these guys? They probably don't make much money ...and they are doing it fast as hell. ..good on em.
Fast is not the right way to do things, they made mistakes and why would anyone want the car treated like crap
Corporations are saints, government is Satan, and people are the things that make God shit himself.
YOUR NOT SUPPOSED TO USED AN IMPACT WITH WHEEL LOCKS
WHAT.
@@samcotten5160 it will snap the inside of the wheel lock
@@chrism340i never happened to me ,but hey who knows maybe I just got lucky
@@samcotten5160 just saw it happen last week
@@chrism340i damn boi
nut gum s.
how much do you hate your dealership to release a video of workers rushing through to save 5 min but instead making a shit ton of mistake
Inspection was terrible.. no air filter, cabin filter, rear brakes, under carriage, wipers, brake fluid, coolant, belts hoses etc was done. Oh well not my car.😜
TOO FAST. SURE THEY FORGOT SOMETHING LIKE REFILL THE ENGINE WITH OIL..... HA HA..
did not ballers the tires
That isn't anything I've ever heard of in my life.
What a joke
I m machine jobs
Those two guys are a mistake waiting to happen they working way too fast
The guy starts to take off the gravel pad with the car 3 feet in the air. Then moves it up another foot to get under it. Still squatting and looking stupid lol.. They didn’t look at anything under the vehicle (probably because they couldn’t walk under it), they didn’t check all the brakes. The guy mounting the tires definitely needs some training..! I can list several other things that were missed or done wrong when doing a lof/rotate. I can only imagine how many people come back due to the oil cap being left off and other dumb things that should be avoided. You can work efficiently and still do a quality job. Both of those lube techs need better training and the guy videoing which I’m assuming is the boss needs training as well...!! These guys will never move up and make it as certified techs working like that..
Melbourne Paint Correction & Auto Detailing The guy started lifting the car as the other guy was still taking the tires off why not have both guys on each side do two tires and check each brake and rotors like they should have both just picked on side instead of the black guy running around to each side
No torque ok n the wheels smh
I hope they didn’t pay for an inspection. Missed inner brake pad measurement. Only measured one part of the tire, didn’t check for cupping, cracking, edge wear etc. on the tires. Didnt check engine or cabin air filter. Didn’t check steering or suspension parts. No battery test. I would be furious if someone just didn’t check that stuff
they did that good fast and correctly
DRETHEARTIST Fast yes correctly no
Geez slow down a little. You are missing things. It’s important to be efficient, but that doesn’t mean to rush through everything. Especially when you are hourly.
seems fake and forced cause camera rolling
many many many failures here. no star patterns when tightening lugs, he tightened the key for the security lug with the impact (big no no) where was the balance for the tires? didn't drain all the oil possibly leaving a quarter of a quart in there. spilled the washer fluid as he was filling it. ect. no not an excellent job. just because you do it quick doesn't mean it's done right. I'd rather wait and make sure my car is done right than someone speed thru everything taking shortcuts possibly ruining parts or damaging my lug nuts.
tires rotated with out balance not good
Dave Glenn Hibbard you don’t balance the tires when you rotate them...
You don't balance tires when doing a rotate.
After watching how many times he dropped lug nuts. I get why he is a not in professional sports like his fellow brothers haha.
Garbage. You can tell they where trying to hard to go that fast cause they normally don’t. Also they didn’t check all the brakes, rotors, lines etc, or anything under the hood like hoses, belts. This guys and place are a joke
Heff Bullies Yep sometimes it's worth to go slower and check it all correctly fast isn't always the best option
Slow af
This is so cringe