CAT D7 dozer ile güzel orman yolu açma videosu beğendim güzel olmuş emeğine, yüreğine, bileğine sağlık kolay gelsin koca yürekli yürekli benim güzel insan hayırlı haftasonlari hayırlı cumartesiler
Awesome video. I've got an old D6 with a manual blade and have cut a couple similar roads, not that steep of a slope though. That's some good work by the operator.
It is a talent few have. You become part of the machine feeling all the vibes through the seat. At times you can also suck air through the seat to. But it is the thrill that makes you go forward. When you know it you can pull grade with out transit.
selamualaikum .Maşallah...En iyi buldozer operatörü becerileri ...Çok ilham verici ve faydalı ...Her zaman başarılı arkadaşlar ..Tanrı seni korusun .Bandar Alay İş Makinaları Kanalı Endonezya'dan Selamlama 🇮🇩🚜🚂😍👍👍
Thank you for posting another great video of the D7G working. The rock is hard in places and their is plenty of heavy loose rock to move as the road is cut. The D7G has no problem getting the job done it is in the hands of a top operator. Thanks again and I catch you on the next one .Cheers 🍻.
Using every bit of torque and leverage as you can can. Loading blade and feathering throttle to just right before tracks spin. No turning load of dirt with the frictions. Using the power of both tracks at all times for a much larger push. You can feel it in the seat. Not bashing the unbroken boulders but not easy on them either. You don't have break downs either. Accept occasional hydraulic hose or maybe linkage wear out. Tight machine for an old one. I ran 6 alot but mostly D9L. Had a D8N new i would get on occasionally. I would think what am i ever going to get done in this little go cart. It was quick but one blade of dirt with the D9 is 3 blades with the D8. The D7 they had was for the soft mud and new help accept me. I started with Hitachi 400 in the muskage because all other opperators would get stuck. I could normally drive stuck excavator out if the house wasn't beared to bad. Most times they would lose a track and not know it. Can't see the tracks. I could and can put them back on in just a minute maybe two. You have to keep your tracks clean or they won't turn. But don't lift them so high you sink the opposite side. Always swing your bucket of dirt in as close as possable so the wieght dosent push down your track. Dig and unload bucket toe to heel or heel to toes. Never extend or dig off side of excavator. Always turn your tracks pointed to where you dig. I retired but miss my D9 seat. Many hundreds of thousands of hours.
Thank you. I have seen operators better or braver than i. But my employers preferred i stayed in the seat before other operators. They would watch me all day. Than tell me they don't understand how it looks like i barely move. But all the sudden huge amounts of dirt is moved and you never came close to abusing the equipment. Pre inspection before work helps alot. Fixing or tightening bolts is mandatory to proper torques. Keeping a smooth push for easier faster back up . If your pushing and lose half your blade of dirt. Push it out anyway. Don't stop and try to get a full blade. It won't work. Lots of simple little secrets. Turn blades of dirt with corner bit not frictions. Never spin tracks. Breaks idler bolts and loosens track pads. It is a bummer but use rippers more often. It really does save time and equipment. Never back blade. Bad habit. Clean air filter daily. Simple things.
Selamun aleyküm ve rahmetullahi ve bereketuhu hayırlı akşamlar ustam kolay gelsin hayırlı işler bol ve bereketli kazançlar başarılar dilerim sana ve ekip arkadaşlarına hayırlı geceler
Amazing video. We would like to show this video on our channel with your permission. We will add your link and your name will also be mentioned in the video. Let us know what you think
Great video. Highly skilled top quality driver, as good as any I've seen and better than most! good camera work and the overhead shots are very good when he can climb the bank!
Wish you had a follow on to this great video, shame it ended when it did, would like to have seen the tree come down. Well done GREYDER and the cameraman, cheers. Tony, (UK)
Se ve muy bonito video , se ocupa mucha experiencia en manejar esa cat d7 porque un error puede irse al voladero ,pero se ve un excelente chofer , muy difícil trabajo ahí en ese cerro muchas rocas pero abansando adelante saludos desde Ensenada bc México
Yeah, I can remember back in the day in my youth of 7 yrs old. Doing this.by hand day,night back in 1777, why it was tough times when I was a youngin . Now everyone has computers, such bunch of sissy's hehehehe
@Greyder_mehmet yeah, all these youngsters,everyone has gotten soft,you can say certain things to girls.or people without them being offended or saying that was innopriate you hust my feelings.lol pshhhh. Dam sissy's hehehehe
This type of fractured rock is very tight and takes a lot of energy to break it apart due to the hardness and shape of it This tractor is doing a great job of breaking it apart and a patient operator is needed for this type of work Even if he almost jumps out of the cab to wave 👋 at the camera 😂
Any operator can spin the tracks and zip back and forth real quick. But that won't get the job done. For one you would be broke down in no time. Grouzers wore off the track pads. Pads come loose very easy if you run to fast on rock plus broken pads. If you worked for me and i seen one track spinning while trying to turn a blade of dirt you would not finish the day on my machine. He is moving max load of dirt feathering throttle and hydraulic blade lifting rock with full power. Making sure both tracks are pushing the load at same time. Id this is James as an operator. I can tell you have rolled one or two times. You never get there with out it. Old cat skinners told me when i was on cable blade D8k you are not a cat skinner untill you roll one a few times. Just turn off the fuel. It will be fine. I was pushing over a large tree. I was backing away as fast as possible. But a huge root huge up under my blade. That tree going down was a lot bigger and heavier than my D6. Pulled me with it and threw me on my side. You can get caught off guard. That long huge root was a very strange situation. You just never know.
another tree hugger(won't show trees being taken down) terrible video,doesn't show more then 30-40 feet of the path,is there a excavator doing most of the work and then the bulldozer picks up the droppings?Cheap video for my precious time people
TEBRİKLER 🎉🎉10 BİN OLDUK 🎉🎉
❤️🔥🥳
😮😮@@Greyder_mehmet😢hvtx8
CAT D7 dozer ile güzel orman yolu açma videosu beğendim güzel olmuş emeğine, yüreğine, bileğine sağlık kolay gelsin koca yürekli yürekli benim güzel insan hayırlı haftasonlari hayırlı cumartesiler
teşekkürler dostum , beğenmene sevindim iyi seyirler
불도저 작업영상이 탁월합니다. 보고있으니 속이 후련합니다.
What is the purpose of the road? There is no drainage for side ditches under the road
. Rains would wash our the road. 😅
Awesome video. I've got an old D6 with a manual blade and have cut a couple similar roads, not that steep of a slope though. That's some good work by the operator.
Thanks my friend, it takes a lot of practice to learn that trade.
Totally awesome operator ¡!!!!!
Hello brother, thank you, on behalf of the operator, greetings from Turkey
It is a talent few have. You become part of the machine feeling all the vibes through the seat. At times you can also suck air through the seat to. But it is the thrill that makes you go forward. When you know it you can pull grade with out transit.
Со стальными яйцами! 👍
selamualaikum .Maşallah...En iyi buldozer operatörü becerileri ...Çok ilham verici ve faydalı ...Her zaman başarılı arkadaşlar ..Tanrı seni korusun .Bandar Alay İş Makinaları Kanalı Endonezya'dan Selamlama 🇮🇩🚜🚂😍👍👍
Halo saudaraku tersayang, komentarmu membuatku bahagia, dengan cinta dari Turki, semoga Ramadhan penuh berkah
Очень тяжёлый грунт но ты настоящий Боец, отлично справляется со своим железным конем. Салам алейкум из Дагестана.
Спасибо брат, большой привет из Турции, я очень люблю Дагестан..
Молодец красиво работаешь. Привет из Челябинска.
Thank you for posting another great video of the D7G working. The rock is hard in places and their is plenty of heavy loose rock to move as the road is cut. The D7G has no problem getting the job done it is in the hands of a top operator. Thanks again and I catch you on the next one .Cheers 🍻.
Hello my dear friend, first of all, thank you very much for your nice comments, I am glad you liked it, see you soon my friend, with love.
Legend of Bulldozer 👍👍
Awesome Power Directer ☺
thank you brother , 👋👋
Super video,interesantno mi vas je gledat majstore ,baratate sa strojem vrhunski,pozdrav vama i vašim kolegama.👍
Pozdrav prijatelju, pozdrav iz Turske, Bog blagoslovio tebe i tvoje voljene.
Güzel çalışma kolay gelsin
teşekkürler sayin izleyicim 👍
Nice work, i can feel forest smell
teşekkürler dostum 👋
Using every bit of torque and leverage as you can can. Loading blade and feathering throttle to just right before tracks spin. No turning load of dirt with the frictions. Using the power of both tracks at all times for a much larger push. You can feel it in the seat. Not bashing the unbroken boulders but not easy on them either. You don't have break downs either. Accept occasional hydraulic hose or maybe linkage wear out. Tight machine for an old one. I ran 6 alot but mostly D9L. Had a D8N new i would get on occasionally. I would think what am i ever going to get done in this little go cart. It was quick but one blade of dirt with the D9 is 3 blades with the D8. The D7 they had was for the soft mud and new help accept me. I started with Hitachi 400 in the muskage because all other opperators would get stuck. I could normally drive stuck excavator out if the house wasn't beared to bad. Most times they would lose a track and not know it. Can't see the tracks. I could and can put them back on in just a minute maybe two. You have to keep your tracks clean or they won't turn. But don't lift them so high you sink the opposite side. Always swing your bucket of dirt in as close as possable so the wieght dosent push down your track. Dig and unload bucket toe to heel or heel to toes. Never extend or dig off side of excavator. Always turn your tracks pointed to where you dig. I retired but miss my D9 seat. Many hundreds of thousands of hours.
Hello sir, as far as I understand, you were a good operator and retired, I agree with your words, good experiences for new operators..
Thank you. I have seen operators better or braver than i. But my employers preferred i stayed in the seat before other operators. They would watch me all day. Than tell me they don't understand how it looks like i barely move. But all the sudden huge amounts of dirt is moved and you never came close to abusing the equipment. Pre inspection before work helps alot. Fixing or tightening bolts is mandatory to proper torques. Keeping a smooth push for easier faster back up . If your pushing and lose half your blade of dirt. Push it out anyway. Don't stop and try to get a full blade. It won't work. Lots of simple little secrets. Turn blades of dirt with corner bit not frictions. Never spin tracks. Breaks idler bolts and loosens track pads. It is a bummer but use rippers more often. It really does save time and equipment. Never back blade. Bad habit. Clean air filter daily. Simple things.
Kolaylıklar dilerim iyi iş çıkartıyor ve iyi çalışıyorsun
teşekkürler sayin abim selamlar , bek iyi oldu emme 😂
Efsane çalışma olmuş
eyvallah kardeşim saol
KAPTAN YİNE KONUSTURUYOR MAKINAYI 👋
teşekkür ediyorum 👍
Selamun aleyküm ve rahmetullahi ve bereketuhu hayırlı akşamlar ustam kolay gelsin hayırlı işler bol ve bereketli kazançlar başarılar dilerim sana ve ekip arkadaşlarına hayırlı geceler
aleyküm selam güzel kardeşim, hayirli ramazanlar iyi aksamlar 👋
good job
thank you sir
I love your country side...
thank you bro 👋👋
Amazing video. We would like to show this video on our channel with your permission. We will add your link and your name will also be mentioned in the video. Let us know what you think
Hello friend, ok you can share, don't forget to tag me :)
Kolay gelsin ustam 🎉
saol teşekkür ediyorum 👋
I like big machines 🤩
Thank you, nice you like it my friend :)
Always leaving out the best parts.
No man, I really don't cut it
@@Greyder_mehmet bad context from the cameraman.Video always seems to stop before pushing trees and difficult rocks,stops just before.
J'adore vos reportages 👍👏et le conducteur est très très bon. 🕊️🇨🇵
Bonjour mon ami, merci, amour de Turquie
تشکر از فیلم خوب شما بسیار دوست دارم کار با بولدوزر را .❤❤❤
ممنون دوست عزیزم، درود از ترکیه
Great video. Highly skilled top quality driver, as good as any I've seen and better than most! good camera work and the overhead shots are very good when he can climb the bank!
Thank you for your interest and likes, sir.
굿 걸들 잘했어요..
하하 고마워 친구
ممتاذ عمل جيدا❤❤❤❤ 0:25
شكرا لك يا صديقي، تحياتي
As a owner operator of a smaller machine I want to acknowledge the skill of this operator
After 40 yrs but only 1000 hrs this guy is talanted
Thank you sir, for your nice comments.
gerçekten çok güzel bir çalışma olmuş tebrikler 🎉🎉
teşekkürler efendim :)
❤❤❤❤❤
👌
Wish you had a follow on to this great video, shame it ended when it did, would like to have seen the tree come down. Well done GREYDER and the cameraman, cheers. Tony, (UK)
Hello sir, I'm glad you like it, I hope you have a good time :)
Great job❤❤
thank you friend, greetings
great operator and photografor good job best video yet
thank you very much my friend, greetings
Se ve muy bonito video , se ocupa mucha experiencia en manejar esa cat d7 porque un error puede irse al voladero ,pero se ve un excelente chofer , muy difícil trabajo ahí en ese cerro muchas rocas pero abansando adelante saludos desde Ensenada bc México
Hola amigo, gracias, definitivamente es difícil, espero que todo salga bien, muchos saludos para ti y tu hermoso país.
1:22:17 ooops moment. Level 10 pucker factor.
merry christmas my friend
Aku seneng meratatakan tanah ink
salam kenal kanca
This is big project why only bulldozer is working. The operator of course will work long hours. Good the weather is cooperating.
thanks dude
Видно оператор опытный, отлично управляет техникой, успехов Вам.
Привет, мой друг, спасибо за твои приятные комментарии, с любовью.
Kolay gelsin usta🎉
teşekkürler dostum 👋
Καλός ο Τούρκος !!!
ευχαριστώ φίλε, χαιρετίσματα
🇮🇱❤️👌👍💋🇮🇱
thank you bro ..
❤❤❤❤❤👏👏👏👏👏👏
🥳👋
Operotor güzel calisiyor
teşekkürler kardeşim selamlar
What should the fence be used for?
seems too narrow for trucks.
Hello friend, the road will be widened, its average width is 6 meters.
Махмед молодец. Красавчик.
спасибо друг, привет
Kolaylık diliyorum ustam
saol ustam teşekkür ederim👍
رائع وجميل ❤
شكرا لك يا صديقي، تحياتي
Круто ,интересно для чего это там нужна дорога?
Привет друг, это сделано в целях предосторожности против лесных пожаров.
Liber 746 yi begemedim bu makina eski ama daha guclu
yeni makinalar tam elektronik olduğundan zorlamıyor
Where is this being filmed ?
Dude, this video was shot in Turkey.
This dude must have balls the size of Durian Fruit with how steep & high that drop is 😮
lol man I've never seen them but they must be pretty big :D
Where is that tree at the early vid. I want to see how the cat tackle that tree but you skip the vid😩
Hello friend, next time I will reduce the cutting of the video.
Either not enough engine or to much blade on this dozer
Hello friend, the dozer is not too big, on the contrary, its blade is of a size that will not squeeze the small machine.
Yeah, I can remember back in the day in my youth of 7 yrs old. Doing this.by hand day,night back in 1777, why it was tough times when I was a youngin . Now everyone has computers, such bunch of sissy's hehehehe
yes sir damn it all the difficulties were happening in your time, now the operators are very comfortable
@Greyder_mehmet yeah, all these youngsters,everyone has gotten soft,you can say certain things to girls.or people without them being offended or saying that was innopriate you hust my feelings.lol pshhhh. Dam sissy's hehehehe
Hello I have a question do you know the TH-cam channel called HATICE CAKMAK?
hello friend yes i know
Cool
90 hp dozer small
My friend, its torque is sufficient and it has been working for us for years.
@@Greyder_mehmet 40 hp tiny but sufficient
Alle freuen sich wenn ie Natur zerstört wird. Toller Kanal 😂😂😂
Hallo mein Freund, ich bin der Diener deiner Befehle.
Lieber den daha güçlü
kesinlikle dostum
wrong maachine for that job
Let's say that's all the possibilities my friend.
Скучно не видно пейзажи и куда падают камни
Привет друг, я показываю тебе время от времени
dude , move the camera to the right to stay in front of the cat. follow the dirt being moved. not the cat.
ok buddy i will handle it
This camera man sucks
That Bulldozer sucks! It lacks push power and weight. Pssst
hello friend thank you
Not much power in this machine
Hello friend, I can undoubtedly say that it is the best in its class.
Keith , For a 25+year old dozer it has a lot of power and it also has to get a grip of the ground.
Nothing like caterpillar 💪 and sharp blade.Nada como caterpillar y una afilada cuchilla.🇵🇷
This type of fractured rock is very tight and takes a lot of energy to break it apart due to the hardness and shape of it
This tractor is doing a great job of breaking it apart and a patient operator is needed for this type of work
Even if he almost jumps out of the cab to wave 👋 at the camera 😂
Any operator can spin the tracks and zip back and forth real quick. But that won't get the job done. For one you would be broke down in no time. Grouzers wore off the track pads. Pads come loose very easy if you run to fast on rock plus broken pads. If you worked for me and i seen one track spinning while trying to turn a blade of dirt you would not finish the day on my machine. He is moving max load of dirt feathering throttle and hydraulic blade lifting rock with full power. Making sure both tracks are pushing the load at same time. Id this is James as an operator. I can tell you have rolled one or two times. You never get there with out it. Old cat skinners told me when i was on cable blade D8k you are not a cat skinner untill you roll one a few times. Just turn off the fuel. It will be fine. I was pushing over a large tree. I was backing away as fast as possible. But a huge root huge up under my blade. That tree going down was a lot bigger and heavier than my D6. Pulled me with it and threw me on my side. You can get caught off guard. That long huge root was a very strange situation. You just never know.
Bravissimo!!!
Grazie :)
почему не экскаватором выполнять эти работы? а увидел экскаватор!
Есть экскаватор, друг мой, но он подрезает уклоны дороги.
@@Greyder_mehmet думаю что прокладка самой дороги ним будет выполнена быстрее а бульдозер спрофилирует
no one wants to see it backing up all the time
yes my friend this is the real thing
Wildland - Fire - Science ! U.S. Geological Survey l CELL TOWER FIREWATCH GEShoop
Approximately 1,050 Simultaneous Kitchen STOVE WALL FIREWATCH GEShoop
hello sir greetings
another tree hugger(won't show trees being taken down) terrible video,doesn't show more then 30-40 feet of the path,is there a excavator doing most of the work and then the bulldozer picks up the droppings?Cheap video for my precious time people
thank you buddy
superjamesmccluskey
Hello sir