Awesome man lithe pit is looking good. When the camera is on the excavator and look out and see all the shelves it looks awesome. I liked the camera looking back on the bed of the dumper looked cool
must be cold, can hear you sniffling. Can't wait to get back out to the RC worksite myself. My excavator turn table gearbox just broke right after i commented on yours being broken. lol. Anyway, another great video, keep'm coming.
As a former mine pit designer, your in and out ramp you should become part of the pit wall. Make it wide enough for two way traffic and place it around the pit wall. This way you can keep the slope at 8 or 10% slope. The equipment can easily go in and out of the pit. The floor of your pit will be more workable and not congested with a ramping system.
We wanted to do that however the pit just isn't big enough for a road for 2 way traffic. It's only 33ft across. Our final depth will be 5ft. Witch we are pretty much there now. I appreciate your information on the mine pit. And if we make a bigger one we will incorporate that into our design. Thanks for watching we appreciate it 😀
@@yellowironcowboyrccon7484 The Green Mountain and Gas Hills area of central Wyoming. Some of the pits were 300 to 400 feet deep. We had to put in sumps and pumps to dewater the pits. We used scrapers, front end loaders, electric shovels and 120 ton electric haul trucks. If even a single width ramp was tied into the side of the pit you can still leave your berms in tact and avoid the ramp congestion your having the middle of the pit. A pit wall ramp also gives you access to the tops of the berms as you go down.
@@yellowironcowboyrccon7484 yes after 31 years I saw mining from staking claims, operating equipment, ore body development, pit designs and reclamation.
Darrell whats your opinion on the lesu 374? We are deciding on another hoe,I have the 945,and we are looking at the 6015 to,here in Colorado we are done digging for the year,ground will be freezing in.so we are looking to buy the 374 or 6015 next year.
I just checked the the weather. It’s 47 there and 38 here. If anyone complains about it being too cold, just tell them this. “IT’S NOT WARM ENOUGH TO BE COLD “ 😜
Hello new subscriber here. Question, where do you get your machines from? Looking to get into this but need to know where to start, lol. thanks love the vids!!!!!
Thanks so much for subscribing!! I/WE get most of our rigs threw toucan hobby, tell I sent ya you may get a discount. We also get them threw eagle mach or rc4wd. Again thanks for watching we appreciate it.
OK, HERO im just asking ok. But what the heck are you digging for. I mean are you looking for something or just curious. I'm just joking with you buddy.😂😂👍
P.S. I wish I could get me one of those big boy toys. Hell the Dozer a Lone cost more than my pickup truck. Hahaha that is sad ain't it . But I'm ok with it. Have fun long as you can. 😎👍
![[TH] VCT Masters Shanghai Swiss Stage DAY 5 // FPX vs TH | FUT vs LEV](http://i.ytimg.com/vi/r61uDZTmu44/mqdefault.jpg)
Gopro footage is nice :) It opens many possible camera angles :)
Closer camera angles are awesome! Loved the angle 4 minutes in.
Great! Thanks for the feedback! We will be experimenting more with the gopro camera.
What camera are you using ? Do you have a live stream on a monitor or just record the video on a SD card? Thanks 😊
Absolutely loved the new camera angles.
Well thank you 😊
We are just learning the gopro. I think it will be a great asset in the video's.
Have fun tomorrow.
Awesome man lithe pit is looking good. When the camera is on the excavator and look out and see all the shelves it looks awesome. I liked the camera looking back on the bed of the dumper looked cool
That gopro is cool we are just learning it. I think it will be a big part of making videos.
Thanks for watching..
must be cold, can hear you sniffling. Can't wait to get back out to the RC worksite myself. My excavator turn table gearbox just broke right after i commented on yours being broken. lol. Anyway, another great video, keep'm coming.
Yeppers they are machines and they break down. Hope ya getter fixed soon CuzzieCuzz.
Awesome
Enjoy your lunch
Ein schönes Video . Gruß Kalle
Thank you Kalle
As a former mine pit designer, your in and out ramp you should become part of the pit wall. Make it wide enough for two way traffic and place it around the pit wall. This way you can keep the slope at 8 or 10% slope. The equipment can easily go in and out of the pit. The floor of your pit will be more workable and not congested with a ramping system.
We wanted to do that however the pit just isn't big enough for a road for 2 way traffic.
It's only 33ft across.
Our final depth will be 5ft. Witch we are pretty much there now.
I appreciate your information on the mine pit. And if we make a bigger one we will incorporate that into our design.
Thanks for watching we appreciate it 😀
What mines have you worked on? I bet you got some great stories.
@@yellowironcowboyrccon7484 The Green Mountain and Gas Hills area of central Wyoming. Some of the pits were 300 to 400 feet deep. We had to put in sumps and pumps to dewater the pits. We used scrapers, front end loaders, electric shovels and 120 ton electric haul trucks. If even a single width ramp was tied into the side of the pit you can still leave your berms in tact and avoid the ramp congestion your having the middle of the pit. A pit wall ramp also gives you access to the tops of the berms as you go down.
@@yellowironcowboyrccon7484 yes after 31 years I saw mining from staking claims, operating equipment, ore body development, pit designs and reclamation.
Darrell whats your opinion on the lesu 374? We are deciding on another hoe,I have the 945,and we are looking at the 6015 to,here in Colorado we are done digging for the year,ground will be freezing in.so we are looking to buy the 374 or 6015 next year.
I just checked the the weather. It’s 47 there and 38 here. If anyone complains about it being too cold, just tell them this.
“IT’S NOT WARM ENOUGH TO BE COLD “ 😜
good day to you its cold hear in new york to is 26 so no rc for now
Well come on out to California you can dig here
that whould be fun some day@@yellowironcowboyrccon7484
Hello new subscriber here. Question, where do you get your machines from? Looking to get into this but need to know where to start, lol. thanks love the vids!!!!!
Thanks so much for subscribing!!
I/WE get most of our rigs threw toucan hobby, tell I sent ya you may get a discount. We also get them threw eagle mach or rc4wd.
Again thanks for watching we appreciate it.
How many loads will the excavator do on a single charge? Lol how many loads will the rock truck haul etc..
On a 24000 mah battery the 6015B last 2.5 hours depending on the work load.
Haul truck runs till noon on a 4200 mah.
@@yellowironcowboyrccon7484 outstanding
Where do you buy your equipment?
Toucan hobby is one place. Eagle mach is another.
Rc4wd is another .
OK, HERO im just asking ok. But what the heck are you digging for. I mean are you looking for something or just curious. I'm just joking with you buddy.😂😂👍
P.S. I wish I could get me one of those big boy toys. Hell the Dozer a Lone cost more than my pickup truck. Hahaha that is sad ain't it . But I'm ok with it. Have fun long as you can. 😎👍