Thanks for tip for a nice Holster & education on the pin. I just bought one & was doing a Holster search, so I found two things finding you. Thanks so much!👍🏾
I’d really love to have one of these for my kel tec, just hard justifying $200 for it. Absolutely awesome idea though. I’ll be saving the webpage for sure. When and if all this craziness dies down I’ll pick one up.
Slim, Thanks for the view and the comment. Yes sir, they are on the spendy side due to the cost of pieces and parts and shipping etc. I'm afraid the craziness is going to get a whole lot worse before it gets better. Let me know its you if you decide to order one up and I will send you a gummy bear plate (absolutely necessary plate) as a free bonus to sweeten the deal for you. We appreciate you and want you to have the good stuff brother. -Shane
@@amorepreparedlife4557 that price also seems to reflect high quality too. I really appreciate the offer and I’ll definitely consider it over the next week or so. It’s starting to look like a “must have” for anyone with a kel tec.
We only use premium hardware that we can expect to perform and not fail us. YOUR product is top of the line. We are pleased to have it on our holsters! Have a SUPER day ! -Shane
Joe, That is the UltiClip Check them out, they are expensive, but they are the REAL DEAL. There are a few models available. I can tell you that the knock off versions give pretty sketchy performance tho. Have a SUPER weekend! -Shane
Jake, Thanks for the comment! The SUB2000 is an excellent gun, but like many things, it has a few weak spots... avoid those and things definitely go better! Stay safe brother! -Shane
Verle, We do sell many of them to folks who use them as mounts in UTV's and other vehicles. Lots of them get sold for wall mounts too. It is a very handy way of keeping your favorite gun close at hand without having to hang it on a rusty nail. Thanks again for the comment and I hope you have a super weekend! -Shane
Thanks for the view and the comment Mondo!! Remember, the gummy bear plates also have a lifetime replacement warranty so they will STAY awesome for you! Have a SUPER evening! -Shane
Ariel, That particular grip works perfectly with the system. It is possible that there may be a setup that doesnt work with this system since there are so many out there but so far we havent had any reported to us. We have LOTS of these selling through our gun store partners for wall mount systems for the Keltecs and AR platforms as well. Seems to be a LOT of people wanting to keep their platform of choice right at hand next to the couch/bed/mantle etc... Have a super day! -Shane
Paul, We were all very sceptical at first how they would fit and feel... but the application is honestly nothing short of astonishing. I'm an ex Army Ranger and I dont put up with half-fast stuff even a little... and this one meets my sniff test in both purpose and absolutely solid quality. Have a super day -Shane
Your content is fantastic, Bro, thank you! GREAT JOB! Here's a dumb question... do you do your own wild game processing? Lots of us do and would benefit from any content you could produce along that line.
Nick, Thanks a TON for the comment and the request brother! We do process our own whitetail and birds. We just finished building a meat processing room for my friends farm. I will see about getting a deer in there and we will show the basics! Thanks a ton for the request/idea! Hope you are having a great weeksnd! -Shane
EXCELLENT IDEA! The pic rail is 90degrees off which poses a challenge but there are some other features that may be more readily mountable. We will have go at it! (love a sensible and obviously useful challenge) This one does indeed BEG for a QD holster! Thanks a TON for the comment Auto! -Shane
Blazer, Thanks for the comment! We have developed another series of holsters like it for the Brevard County Sheriffs Office in Florida too... We may make them available to public soon Have a super day! -Shane
Gman, That is a good question... it will depend on the design of the buttstock pad I suppose. I just don't know brother. Let us know when you find out!! -Shane
Not sure id carry something like that strapped to my leg all the time, a handgun would be far faster to draw and be less intrusive. Seems like it would be perfect for an ATV/UTV mount however and a long gun is obviously far more effective for any situation where you have a little more time to react.
MyVids, We do indeed have lots of folks who mount them in the side by sides. And, you are correct. This one isn't a fast draw rig. For the rig that lets you carry a long gun, including a SBR or a M4 Platform and draw much faster, check out the GateKeeper and Gatekeeper Jr devices on the T2GCustomProducts.com website. TH-cam video links are there for those... Thanks a bunch for the comment! Stay ready and stay safe. -Shane
that one is the Rokon Trailbreaker... It is on their website under "Rokons for Hunters" We added a few modifications to it and it has the trailer hitch. This one is maybe 4 years old... We have an older (1970's model I dont recall the year) and it is a 2 stroke. Believe it or don't, we like the 2 stroke arguably better... We got the older one for $2500 and the new one was like $8500 and we argue all the time about whether the new one was worth the extra money. The new one made it into the video though because it is prettier for camera. I can tell you that we dont ride them a whole lot though because they are a TON of work to ride. After a day of crashing through the woods on these things you can skip the trip to the gym for a couple of days because you are completely smoked. They are cool and they go almost anywhere though. Thanks for the view and the comment! Have a super week! -Shane
Thanks for your feedback. You might be more interested in something like this. t2gcustomproducts.com/gatekeeper-jr/ We have produced these for law enforcement and security but are open to discussing further if you are interested.
Cesar, The "Mini" is available with no logo. It works exactly the same but it is a little shorter. I will have one put up on the webstore by the end of this week -Shane
Thanks Paul, You wouldn't believe how natural they feel on your leg too! I originally thought it would be a big stupid thing strapped to my leg, but almost immediately after putting it on it felt like it grew there. I have been wearing one around the property for over a week now and walking, standing, or running, I seriously forget the thing is on my leg. It's really better than I imagined. -Shane
Could I use this as a holster for an Ar pistol? Probably should have paid more attention but ahh screw it. Wanted to see if anyone had used it for so yet
Wish it worked for my Gen 1!!! I have considered trading my Gen 1 in for a Gen 2 but the first Gen 2's were so riddled with problems and my 1 runs so perfect... I can't!!! Now I just can't figure out whether to go with a Red lion or the Kel Tech rails for it!!!
Jpb, Yes sir... The M-LOK rails are sure a nice upgrade. opens up lots of possibilities! Let us know what you decide to do in the end ! -Stay safe Shane
Gilberto, It is expensive, I totally agree. You wouldn't believe the price for the components these days. It was a shocker for us too. If it is any help, it fits many things with M-LOK including shorter versions of the AR- series stuff And if you get one off of the store website you get a free gummy bear plate with it. Have a super day! -Shane
I love my Sub-2K but I can't imagine any scenario where a holster for it would be useful. It's not great for defensive situations where you might have to deploy a firearm FAST, like a wild animal attack. No bear or cougar is going to sit around and wait for you to unfold your gun and rack a round if they've decided to go after you. 9mm and .40 are weak for these applications anyway. You're better off with a long-barrel .357, .44, or 10mm pistol, or an actual long gun if you're that worried about it.
I’ve been out working in the woods as a tree planter and all of my many bear encounters makes me certain that you’d be able to pull out your gun for the vast majority of those situations.
Hey, Thanks for the interest in our Holster! We agree its very cool! Your correct, all those factors play a role in our price point per unit. However, we have many factors that play a role in the cost. Just to name a few factors For example; sales tax, life time warranties, no questions asked refund policy and many more factors that go into running a business. Running a business is expensive! Again, thank you for checking out our video and I Hope you a great day! :)
@@innercityprepper Yes sir, There is a whole world of difference coming to reality with Made in America products, hand made quality, and the crazy inflation going on. The truth is that the genuine premium fasteners cost a lot of money, there are a pile of fancy screws and eyelets involved and they are not one penny items either. Then there is an expensive CNC machine involved in the manufacturing process because the holes need to be made with a lot of precision or the three layers of kydex will never be able to be joined together. In addition, every single one is made by hand. These are not an injection molded commodity so that kind of pricing just isn't an option. What we can tell you is that from the moment that you put your hands on these things you will say... wow... this is quality stuff. NO China boats involved in this stuff brother! Thanks again for the comment ! We love hearing from folks! -Shane
Polarity, Now, I'm with you in that I'm not a big fan of the 9... But... Believe it or not the longer barrel keeping the bang behind the bullet is a big deal we are piercing 55 gallon drums easily AND... we are ringing the gong consistently at 150 yards!!! I would have NO problem putting this in my archery "bear stand" as backup. No problem at all. Now understand, we have black bears where I live and not Browns etc... But everyone has their own opinion and I appreciate you voicing your opinion brother. Thanks for the view and the comment and Have a super evening! -Shane
So not useful. And he needs to stop saying that part that covers the barrel and all is absolutely necessary. It isn't. Ita at best a want not a need and what dummy is trying to carry a 4lb weapon on their leg. That's why we purchased the sub2000 not to open carry but conceal it in a backpack.
WOW!! THAT is cool!!
Thanks! After a LOT of work and R&D are finally able to be shared with the world!
-Shane
NOOOOOOOOOOOOOOOOOOOOOOOO THAT IS HOTTTTTTTTTTTTTTTTTTTTTTTTTTT! AHHH!
Thanks for tip for a nice Holster & education on the pin. I just bought one & was doing a Holster search, so I found two things finding you. Thanks so much!👍🏾
Thank You for that tip at the end , very handy to know.
Myomoto,
Thank YOU for the comment!
Have a super day!
-Shane
That was GREAT info on moving the stock 👍
I’d really love to have one of these for my kel tec, just hard justifying $200 for it. Absolutely awesome idea though. I’ll be saving the webpage for sure. When and if all this craziness dies down I’ll pick one up.
Slim,
Thanks for the view and the comment.
Yes sir, they are on the spendy side due to the cost of pieces and parts and shipping etc.
I'm afraid the craziness is going to get a whole lot worse before it gets better.
Let me know its you if you decide to order one up and I will send you a gummy bear plate (absolutely necessary plate) as a free bonus to sweeten the deal for you.
We appreciate you and want you to have the good stuff brother.
-Shane
@@amorepreparedlife4557 that price also seems to reflect high quality too. I really appreciate the offer and I’ll definitely consider it over the next week or so. It’s starting to look like a “must have” for anyone with a kel tec.
@@yungcrnck Sounds good slim, Have a SUPER evening!
-shane
$200 it's half the cost of a new sub2k
Good point. I pick up my Sub 2000 tomorrow. This last tip will be the first thing I do to it. Thanks.
I think you will REALLY love your Sub2K brother.
They are pretty special.
Have a super day
-Shane
Thanks for the tip on changing the pin position! Ingenious!😊
They need to make one where it can be used with the mcarbo optic mount.
thankyou for that little suggestion at the end. that is 2 things I learned from you now. liked and subscribed
Thanks for that last tip.
The perfect solution for mounting the gun in a vehicle while camping! I'll be getting one of these for my FJ.
ETA: Great tip about the stock pin, too!
Hay thanks for the tip. Just bought my sub 2000. I’ll remember to adjust that but stock 🤙
Peter,
Right on brother!
It is one of those things that once you see the problem it is hard to un-see it!
Have a super holiday !
-Shane
@@amorepreparedlife4557 🙏🤙
That's a great design and a great use of our UltiLink!
We only use premium hardware that we can expect to perform and not fail us. YOUR product is top of the line. We are pleased to have it on our holsters!
Have a SUPER day !
-Shane
I like the holster.
What is that castle nut you have installed?
Appreciate the info.
Joe,
That is the UltiClip
Check them out, they are expensive, but they are the REAL DEAL.
There are a few models available.
I can tell you that the knock off versions give pretty sketchy performance tho.
Have a SUPER weekend!
-Shane
thanks for that advice. ill look at mine and adjust accordingly.
Jake,
Thanks for the comment!
The SUB2000 is an excellent gun, but like many things, it has a few weak spots... avoid those and things definitely go better!
Stay safe brother!
-Shane
I like this solution for mounting in UTV. Not so sure I’d wear it as a holster. But very good thinking 👍👍
Verle,
We do sell many of them to folks who use them as mounts in UTV's and other vehicles.
Lots of them get sold for wall mounts too. It is a very handy way of keeping your favorite gun close at hand without having to hang it on a rusty nail.
Thanks again for the comment and I hope you have a super weekend!
-Shane
I couldn't find how to adjust butt stock. Thanks!
I have two gummy bear plates and there are AWESOME!!! Perfect fit!!!
Thanks for the view and the comment Mondo!!
Remember, the gummy bear plates also have a lifetime replacement warranty so they will STAY awesome for you!
Have a SUPER evening!
-Shane
Wow!!! Thanks for the info!!!
That makes for an expensive wall mount😵💫
Great design holster! I noticed you have a kel tec angled grip on one of the sub2000. How did it fit? Was there a gap in the middle once installed?
Ariel,
That particular grip works perfectly with the system. It is possible that there may be a setup that doesnt work with this system since there are so many out there but so far we havent had any reported to us.
We have LOTS of these selling through our gun store partners for wall mount systems for the Keltecs and AR platforms as well. Seems to be a LOT of people wanting to keep their platform of choice right at hand next to the couch/bed/mantle etc...
Have a super day!
-Shane
Great information!
Now we need an IWB version
That's a nice fit.......
Paul,
We were all very sceptical at first how they would fit and feel... but the application is honestly nothing short of astonishing. I'm an ex Army Ranger and I dont put up with half-fast stuff even a little... and this one meets my sniff test in both purpose and absolutely solid quality.
Have a super day
-Shane
Mounted in your side by side would be cool
ksw,
Yes sir! We have lots of folks who use it for that!
-Shane
Your content is fantastic, Bro, thank you! GREAT JOB! Here's a dumb question... do you do your own wild game processing? Lots of us do and would benefit from any content you could produce along that line.
Nick,
Thanks a TON for the comment and the request brother!
We do process our own whitetail and birds.
We just finished building a meat processing room for my friends farm.
I will see about getting a deer in there and we will show the basics!
Thanks a ton for the request/idea!
Hope you are having a great weeksnd!
-Shane
100% I agree
Great video! Thanks from Ukraine!
Where can i purchase one for my keltec 2000.
Now make one for the CMR-30! No MLOK or KeyMod but a lot of pic rail.
EXCELLENT IDEA!
The pic rail is 90degrees off which poses a challenge but there are some other features that may be more readily mountable. We will have go at it! (love a sensible and obviously useful challenge)
This one does indeed BEG for a QD holster!
Thanks a TON for the comment Auto!
-Shane
Nice , have to try it
Blazer,
Thanks for the comment!
We have developed another series of holsters like it for the Brevard County Sheriffs Office in Florida too... We may make them available to public soon
Have a super day!
-Shane
Thank you for the tip.
Tim,
You are very welcome brother
Stay safe!
-Shane
Great tip on adjusting the buttstock. but will it work if I have a buttstock pad on it. I ordered the pad from mcarbo
Gman, That is a good question... it will depend on the design of the buttstock pad I suppose. I just don't know brother.
Let us know when you find out!!
-Shane
Not sure id carry something like that strapped to my leg all the time, a handgun would be far faster to draw and be less intrusive. Seems like it would be perfect for an ATV/UTV mount however and a long gun is obviously far more effective for any situation where you have a little more time to react.
MyVids,
We do indeed have lots of folks who mount them in the side by sides.
And, you are correct. This one isn't a fast draw rig.
For the rig that lets you carry a long gun, including a SBR or a M4 Platform and draw much faster, check out the GateKeeper and Gatekeeper Jr devices on the T2GCustomProducts.com website. TH-cam video links are there for those...
Thanks a bunch for the comment!
Stay ready and stay safe.
-Shane
Thanks for the video.
Thank YOU for watching and subscribing neighbor!
Hope you have a super weekend!
-Shane
Wow what model rokon is that!! Thanks!
that one is the Rokon Trailbreaker... It is on their website under "Rokons for Hunters"
We added a few modifications to it and it has the trailer hitch.
This one is maybe 4 years old... We have an older (1970's model I dont recall the year) and it is a 2 stroke. Believe it or don't, we like the 2 stroke arguably better... We got the older one for $2500 and the new one was like $8500 and we argue all the time about whether the new one was worth the extra money. The new one made it into the video though because it is prettier for camera.
I can tell you that we dont ride them a whole lot though because they are a TON of work to ride. After a day of crashing through the woods on these things you can skip the trip to the gym for a couple of days because you are completely smoked. They are cool and they go almost anywhere though.
Thanks for the view and the comment!
Have a super week!
-Shane
Love the idea - hate the price
So, how much weight do those devices that mount to the MLOK weigh? How much weight are we adding to the gun?
Alex,
About 3 ounces. They are very lightweight
Have a great day
-Shane
This would be great to keep ome in the mule lmao
That's more of a holder than holster. A sling, properly rigged in the folded position , works best for me.
Thanks for your feedback. You might be more interested in something like this. t2gcustomproducts.com/gatekeeper-jr/ We have produced these for law enforcement and security but are open to discussing further if you are interested.
Do they have any other designs for the holster. I would prefer no designs like the cross on it just plain
Cesar,
The "Mini" is available with no logo.
It works exactly the same but it is a little shorter.
I will have one put up on the webstore by the end of this week
-Shane
pretty cool
Captive,
Thanks for the comment!
I appreciate you taking the time!
-Shane
Wow, awesome!!
Thanks Paul, You wouldn't believe how natural they feel on your leg too! I originally thought it would be a big stupid thing strapped to my leg, but almost immediately after putting it on it felt like it grew there. I have been wearing one around the property for over a week now and walking, standing, or running, I seriously forget the thing is on my leg. It's really better than I imagined.
-Shane
nice, thank you
Dan,
Thanks for the comment and the view!
We really appreciate when people take time to give us feedback!
Have a super weekend man,
-Shane
Could I use this as a holster for an Ar pistol? Probably should have paid more attention but ahh screw it. Wanted to see if anyone had used it for so yet
Thanks for the great question! As long as you have a M-LOK on your AR Pistol you can use this holster!
Wish it worked for my Gen 1!!!
I have considered trading my Gen 1 in for a Gen 2 but the first Gen 2's were so riddled with problems and my 1 runs so perfect... I can't!!!
Now I just can't figure out whether to go with a Red lion or the Kel Tech rails for it!!!
Jpb,
Yes sir... The M-LOK rails are sure a nice upgrade. opens up lots of possibilities!
Let us know what you decide to do in the end !
-Stay safe
Shane
I could really use something like this, riding a 4 wheeler on our land; but it's hard to justify a 200 bucks accessory for a 500 bucks gun.
Gilberto,
It is expensive, I totally agree.
You wouldn't believe the price for the components these days. It was a shocker for us too.
If it is any help, it fits many things with M-LOK including shorter versions of the AR- series stuff
And if you get one off of the store website you get a free gummy bear plate with it.
Have a super day!
-Shane
Wow. That is very strange.
Как я могу купить такое приспособление ?Украина,Харьков
Как можно заказать такую платформу ?
They sell on the website for $200 US and shipping would have to be added if it was shipping internationally to Russia.
Ок. Это супер надо отправлять в Украину
I love my Sub-2K but I can't imagine any scenario where a holster for it would be useful. It's not great for defensive situations where you might have to deploy a firearm FAST, like a wild animal attack. No bear or cougar is going to sit around and wait for you to unfold your gun and rack a round if they've decided to go after you. 9mm and .40 are weak for these applications anyway. You're better off with a long-barrel .357, .44, or 10mm pistol, or an actual long gun if you're that worried about it.
Charles,
Thanks for the comment!
Have a super weekend!
-Shane
I’ve been out working in the woods as a tree planter and all of my many bear encounters makes me certain that you’d be able to pull out your gun for the vast majority of those situations.
That’s cool, but not 200$ cool. That’s like MAYBE ..50$ worth of material and what? An hour or so of labor per unit?
Hey, Thanks for the interest in our Holster! We agree its very cool! Your correct, all those factors play a role in our price point per unit. However, we have many factors that play a role in the cost. Just to name a few factors For example; sales tax, life time warranties, no questions asked refund policy and many more factors that go into running a business. Running a business is expensive! Again, thank you for checking out our video and I Hope you a great day! :)
You gotta understand that R&D as well as market forces such as demand help inform prices, right?
@@innercityprepper Yes sir, There is a whole world of difference coming to reality with Made in America products, hand made quality, and the crazy inflation going on.
The truth is that the genuine premium fasteners cost a lot of money, there are a pile of fancy screws and eyelets involved and they are not one penny items either. Then there is an expensive CNC machine involved in the manufacturing process because the holes need to be made with a lot of precision or the three layers of kydex will never be able to be joined together.
In addition, every single one is made by hand. These are not an injection molded commodity so that kind of pricing just isn't an option.
What we can tell you is that from the moment that you put your hands on these things you will say... wow... this is quality stuff.
NO China boats involved in this stuff brother!
Thanks again for the comment ! We love hearing from folks!
-Shane
yeah 9mm is gonna do damage to a bear or a mountain lion.
Polarity,
Now, I'm with you in that I'm not a big fan of the 9... But...
Believe it or not the longer barrel keeping the bang behind the bullet is a big deal we are piercing 55 gallon drums easily AND... we are ringing the gong consistently at 150 yards!!!
I would have NO problem putting this in my archery "bear stand" as backup. No problem at all.
Now understand, we have black bears where I live and not Browns etc...
But everyone has their own opinion and I appreciate you voicing your opinion brother.
Thanks for the view and the comment and Have a super evening!
-Shane
thts too much shit too go threw but nice
Bobby,
Thanks for the comment!
Have a super day!
-Shane
So not useful. And he needs to stop saying that part that covers the barrel and all is absolutely necessary. It isn't. Ita at best a want not a need and what dummy is trying to carry a 4lb weapon on their leg. That's why we purchased the sub2000 not to open carry but conceal it in a backpack.