Excellent work, sorry sir, I have a question about the Hikvision camera ip poe. When it is connected, the AI works continuously without interruption, with no reading on the device. What do you think, where does the problem error ? thanx
I have a question. An IP camera with PoE power supply is available. On the board the transformer PDT2431SR on a datasheet, on contacts 3/4 power supply of 33-57 volts, contacts 1/2 is 12 volts, contacts 5/8 and 6/7 is 5 volts. So that's the question if I immediately apply to the contacts 1/2 power 12 volts? Will it work?
all ipcam i repair like hikvision dahua bosch vivotek have only one ouput on the chooper transformer. output normally is 12 volts the on the circuit will divide using ic to required on the system 3.3v 5v 1.5v so if you inject 12dc on the second filter all system will work. Do you have picture of ur poe circuit pls send i will chk. and what issue u encountered? why u need to do that?
@@beniptec drive.google.com/file/d/13_o6meIWG6KyjI5eIsR3nwBuAWhAoD1j/view?usp=drivesdk drive.google.com/file/d/13cEyLrNe9cH0nMdXXCg7D2q40Z_t8Tzf/view?usp=drivesdk trying to connect the camera. the first photo of the scheme I drew. second photo of the connection board.
yes if you apply 12 dc it will work that is the main output voltage of the poe. this poe is like step down circuit in is 58 volt then step down to 12 dc and theres a regulator to reduce 5 and 3.3
Hello, the poe input does not work on my 2 cameras, the same as the camera model that I watched the video. Camera works from extra 12v input. I found the short circuit diodes and disabled them by watching your video. camera worked via poe. I did the same on the other camera but it didn't work. Is there a problem somewhere else, how can I find it?
chk mo un bridge diode kung walang short. next un ic sa poe module reheat mo pag ayaw parin plug mo un dsp module sa poe test mo 2nd filter kung di short next time upload ako ng full troubleshooting ng ipcam
I am using Dahua NVR & cameras. They were working fine for 3 months. But suddenly some of the cameras fail to start by PoE. The NVR PoE failed too. I even updated the firmware of the NVR but no change. Now I installed a separate power cable to each cams and use power adapter to power the cameras.
@@getachew94 this is hardware issue not fw but first you need to identified which one have the hardware problem. did you try plug this faulty camera on the nvr poe working port? if yes its mean you camera poe having problem. i will chk this dahua cam how this poe design. pls send me the model
Gracias por el video y aprender a buscar solución de reparación.
i so much understand YOUR ILUSRTATION BOSS
Meto ek video se hi insfair ho gya hu
Excellent work, sorry sir, I have a question about the Hikvision camera ip poe. When it is connected, the AI works continuously without interruption, with no reading on the device. What do you think, where does the problem error ? thanx
What you mean device not detecting this camera or isseu for AI?
gracias por compartir ,deseo aprender mas,tienes mas videos?
from where we can get this diod spare part
تنها خود کمره😊
I have a question. An IP camera with PoE power supply is available. On the board the transformer PDT2431SR on a datasheet, on contacts 3/4 power supply of 33-57 volts, contacts 1/2 is 12 volts, contacts 5/8 and 6/7 is 5 volts. So that's the question if I immediately apply to the contacts 1/2 power 12 volts? Will it work?
all ipcam i repair like hikvision dahua bosch vivotek have only one ouput on the chooper transformer. output normally is 12 volts the on the circuit will divide using ic to required on the system 3.3v 5v 1.5v so if you inject 12dc on the second filter all system will work. Do you have picture of ur poe circuit pls send i will chk. and what issue u encountered? why u need to do that?
@@beniptec
drive.google.com/file/d/13_o6meIWG6KyjI5eIsR3nwBuAWhAoD1j/view?usp=drivesdk
drive.google.com/file/d/13cEyLrNe9cH0nMdXXCg7D2q40Z_t8Tzf/view?usp=drivesdk
trying to connect the camera. the first photo of the scheme I drew. second photo of the connection board.
yes if you apply 12 dc it will work that is the main output voltage of the poe. this poe is like step down circuit in is 58 volt then step down to 12 dc and theres a regulator to reduce 5 and 3.3
Hello, the poe input does not work on my 2 cameras, the same as the camera model that I watched the video. Camera works from extra 12v input. I found the short circuit diodes and disabled them by watching your video. camera worked via poe. I did the same on the other camera but it didn't work. Is there a problem somewhere else, how can I find it?
chk mo un bridge diode kung walang short. next un ic sa poe module reheat mo pag ayaw parin plug mo un dsp module sa poe test mo 2nd filter kung di short next time upload ako ng full troubleshooting ng ipcam
sure k b ok un nvr poe port try mo sa working port baka nmn sa nvr port ang problema
Thank you very much. What can cause such problems?
because this surge protector is not good so brige diode will short. removed that protector ur camera will getting any issue
@@beniptec Thanks for the reply
removed this and ur cam is working no issue. cam is still protected because this poe circuit is adjustable like psu switching type
I am using Dahua NVR & cameras. They were working fine for 3 months. But suddenly some of the cameras fail to start by PoE. The NVR PoE failed too. I even updated the firmware of the NVR but no change. Now I installed a separate power cable to each cams and use power adapter to power the cameras.
@@getachew94 this is hardware issue not fw but first you need to identified which one have the hardware problem. did you try plug this faulty camera on the nvr poe working port? if yes its mean you camera poe having problem. i will chk this dahua cam how this poe design. pls send me the model
Super
Obrigado
I have an ip camera that has a LED that lights up, but it doesn't show up
share led video
Can I send my two cameras to you for repair?
yes
@@beniptec Where would I be sending? Are you in the states? Also, would you have an approximate cost?
Tik he bhai kha se ho aap
english bhai dont understand
مشکل نیست کمره ره بیارین بیرون که کدام لین است
Muje bi aap ke shat kar lo naa yar
که به موبایل بن میکنم
Boss saan location ipagawa ko Sana Yung 3 IP camera hamrol bigla nlng ayaw na gumana
nasa dubai p ako sir mga sept dyan ako pinas. sta rosa ako
boss，saan po pwde bumili piyesa diode。？
pa send ng picture ng diode
online marami
اگر برتان
Contact Number/Details?