Building a Drift Body - RMX 2.0 Drift Series - Part 4
ฝัง
- เผยแพร่เมื่อ 22 พ.ค. 2022
- We bought a new r/c body! Now it's time to detail it. Today, we detail a new drift body with scale accessories and body upgrades, plus new tires and awesome scale drift wheels.
Items we used:
Body: Nissan Skyline R31 by Killerbody: www.amainhobbies.com/killerbo...
LED Accessory Set (to hold in LED's): www.amainhobbies.com/killerbo...
LED Lights (from Killerbody - recommended): www.amainhobbies.com/killerbo...
LED Lights (MyTrickRC - what we used): www.amainhobbies.com/mytrickr...
Wire Management Clips: www.amainhobbies.com/schumach...
Magnetic Body Mounts: www.amainhobbies.com/scale-re...
Roll Bar Cage Set: www.amainhobbies.com/fusedrc-...
1mm Trim Tape: www.amainhobbies.com/kyosho-1...
Rear Wing Set: www.amainhobbies.com/yeah-rac...
Chrome Front Blower: www.amainhobbies.com/rpm-mock...
Half Turbo w/ Yellow Cone: www.amainhobbies.com/sideways...
Side Pipe Intercooler V3: www.amainhobbies.com/sideways...
Long Spring (used to hold intercooler tubes): www.amainhobbies.com/protek-r...
5-Spoke Gold/Chrome Drift Wheels: www.amainhobbies.com/ds-racin...
DS Racing Drift Tires: www.amainhobbies.com/ds-racin...
Purple Lug Nuts (for wheels): www.amainhobbies.com/ds-racin...
Drift Sticker Set: www.amainhobbies.com/fusedrc-...
Tools & Materials:
Clear Double Sided Tape: www.amainhobbies.com/protek-r...
Thin Double Sided Tape: www.amainhobbies.com/protek-r...
Straight Hobby Scissors: www.amainhobbies.com/protek-r...
CA Glue: www.amainhobbies.com/protek-r...
For all of your RC needs visit AMain Hobbies: bit.ly/XcAuJr
Follow us on Instagram: / amainhobbies
Like AMain Hobbies on Facebook: / amainhobbies
Follow @AMainHobbies on Twitter: / amain_com - กีฬา
![Lp. Последняя Реальность #81 ЗАХВАТ ГОРОДА [Переполох] • Майнкрафт](http://i.ytimg.com/vi/Fj_3CYkW3uo/mqdefault.jpg)
R.I.P to that R31 body
Haha facts
the supercharger and turbos ruined it
@@yelo7856 such half assed install too
This is the most Troll video in RC to showcase products I've ever seen 😂
Something about two turbos, and a blower? I know it's a hobby, but not sure it works that way.🤷♂️
It’s called twin charging people use it for super high horsepower
Let him have fun it what hobby supposed to do make you happy
saw an rx 7 fc a while ago with a blower and 2 turbos, lancia also did it in group B by using the supercharger for low speeds and then switching to the turbo at high speeds to help lag.
I saw that too, but I think its ridiculous enough to be a fun Easter egg for car guys.
It was clearly AMain trying to display all their Drift accessories.. The stock mustang body definitely looked better.
Xzibrett bringing the Pimp My Ride PTSD hardcore 😂😂👍
I’ve been waiting for this video for a long time...
Love the drift content but holy crap did you destroy that body. lol
never in my life would i have expected a full grown adult to build a car lookin like that. Does he really think the fake twin charged thru the hood setup looks cool on an R31?? and couldn’t even mount the wing! it’s not even my car and it’s got me upset lol
@@thegarf5677 Its almost like they're showing what all can be done to a car. If someone from the internet doing something to their own rc car has you upset, maybe you need a new hobby.
@@freighter1097 if u think this is showing off what can be done to a drift car, i’m very sorry for u! Even if you’re speaking purely cosmetic, this is crap. He didn’t even mount the wing right. He coulda done aero and made it clean, but instead, he riced out a kyusha (intended) style body.
@@thegarf5677 Why do you care so much? It isn't yours. Let people enjoy what they want and stop being a miserable cold bowl of soup. I can hear you now as being that annoying guy that tells people how to eat their steak or how they're having fun wrong.
@@freighter1097 missing the point entirely. you and this dude can have fun with your riced out rtr’s lol
The best thing to use to get the body magnets to actually stay on the body is 3M molding adhesive for real cars. I have never had servo tape last longer than a month.
Good idea, we'll look into that.
-Brett
Glad you stayed authentic to the drift community with the detailing, Especially Magnet Body mounting. Post are now a thing of the past just like antennas sticking out. Buuut all them intakes and Doubled spoiler is extra as can be you took the Rice out and switched it for Tuna Casserole
Stunning, thanks for share more drift content. 👽🤘💯☑️
Its looks cool with the lights and roll cage. But the blower, intercooler, turbos, and wing make it look too crazy for me. But thats me. If it has a lower/ smaller wing, i thin it would work better.
Thats just me tho, i love this body and definitely the color, but it seems a bit excessive to add those small things
its funny but at the end, i realized that if i had the skyline body with all the extras, i would love to change it to the original!!ahahhaha ( love the content though!)
Don't agree with all the mods. I am happy to see more drift content.
Last drifting video for them
this reminds me of the TRD laser from mighty car mods...
That is one crazy body lol
Looks preety dope, good job ^^ awesome hobby
thats dope man keep the videos coming
Well..at least I’m not the only dummy who ground down his front posts :)
Hilarious thumbnail pick 😂
Those wheels are SICK!
Love this. Great job.
Off-Road is my favorite terrain
custom is soo cool. good video thanks
Good video man, thanks!!!
Sick build👍🏼👍🏼
love your videos!
It’s a good video 😮 so lovely Rc
Back to the Future IV: Osaka Drift 🤣🤣🤣
Nah bruh. I was expecting a clean build🥲. Those air intakes, blower and oil intercooler needs to go😁. The YR spoiler mounts needs to be attached beside the license plate.
Yea there to much for the car it looks nice without the pieces on the hood
“An idiot admires complexity, a genius admires simplicity" - Terry Davis
Very nice
You all need to do a part 5, look online and check out the real Blow Back kit from Arnon Chanphon out of the World Wide Drift RC Group. He build a blow back w/Turbo thats AMAZING!!
Send me a link. I tried googling it but not sure what i'm looking for.
-Brett
Awsome possom
Cool!
Sheeeesh I 4got all about this series. 😂😂😂. Took a break huh?
Wing isnt mounted right because the body has a dove tail wing on it already. It should mount to top of trunk not back. Besides that, nice build
The wing only mounts from the back, not the top. Here are some other photo's from Yeah Racing: www.yeahracing.com/carbon-graphite-spoiler-wing-mount-w-plastic-rear-wings-for-1-10-drift-type-a-ya-0508-00068944
-Brett
@@AMain_Hobbies the wing is still not mounted correctly. based off a real life chassis mount wing, it is meant to be lower on the back of the car, more on the rear bumper
I guess it's as correct as their personal preferences. :p Still, they could have missed something.
I'd also have mounted it lower, probably on the bumper.
@@zach125b yeah, it even looks like the body has a specific place to mount it around the license plate
Faaaaaack twin turbo and super charger daaaaaaaaaamn.
Exhaust manifold spring someone let me in on this it’s the first time I’ve ever seen them or heard of putting “springs on it” I’m genuinely curious I’ve probably just been under a rock 🤣🤣
you should use a dark dragon wing blower motor instead of a plain rpm one
Awesome job, bro! When is Part 5 coming?🤣
since when did an r31 have a blower and 2 turbos with a non functionally mounted cooler on the side fender? state farm says "this looks hideous"
Well that’s quite unique lookin…lol
15:17 This is what it is. it's not supposed to look exactly how you want, or be realistic, and it shouldn't have to be. a big reason why people get into RC is because they can do whatever they want and aren't bound by the limitations of real cars and the money it takes to build them., so it annoys me when people try to enforce these non-existent rules and bring in the toxicity of the irl car scene. btw the wing has 2 small tabs that you can barely see that would cover up a part of the license plate so thats why its mounted higher
I'm with you IceBrew. The r/c hobby is supposed to be a sandbox for people to create anything they want. Sadly, that seems to be lost on some people.
-Brett
will this series be continued?
i remember you said in part 1 that you would like to make this one easy to drive and stuff. since i am into 10th scale drifting myself, i can tell you there are some good things you could do to this chassis on the performance side to improve the driving experience. first thing that comes to mind would be a sensored motor system for improved throttle control. also keep the poles of that motor as low as possible (not the windings), a lighter rotor tends to have less coasting effect, when you let off the gas. could be benefitial.
in any case, fun series, entertaining to watch. thank you.
-Daniel.
ReSpEcT AlL bUiLdS 🥴😬🤣
😂😂😂😂
Great job! I wonder how all that bling would look like in the original body, I think I would have liked it better. What matters is what rows your boat! :)
Wing should be mounted down near the license tag and the flat upright surface would have given you a correct wing angle. It’s tough to accept a wing that looks like that.. I think next time a little more research and knowledge gained before rushing into a video would be beneficial. Appreciate the time you took to make a video though. Parts 1-3 were great.
I did the same thing with the wheels cause the offset cause it to scratch on the brakes also if you do it on mst rmx remove the spacers if you have them.
Really cool build, looks good.
Looks cool Brett. I had a R31 four door 1:1 as my first car in the early 90’s and always wanted to do it up, it’s long gone but maybe I will do a smaller version of my dream car.
Don't lie to him. This looks like pure crap
I mounted the front of the rim on the tire then put the back piece followed by the screws..much easier.
Maybe take off the blower wing and one or both turbos to make it look better.
17:20 Don't you need the channel 3 on the transmitter for the adjustments of the Gyro?
No, you adjust the gyro on the gyro. You'll need a fancier system if you want to adjust the gyro from the transmitter.
-Brett
@@AMain_Hobbies ah ok, didn't know that
there's a kit you can get that uses the magnets to power the lights when the body is connected
You could also make your own but you have to know wiring REALLY well or you can short out the receiver. I mean, it’s a simple electrical circuit but you still run the risk of possibly shorting something out.
The two yellow filters on the hood look like two eyes looking at its nose.
The body turned out great but if it was my I wouldn’t add those intakes and supercharger on top of the hood, in my eye they simply ruined it. But this is subjective, and I still enjoyed the video.
Wing looks a bit strange with how much it’s pointing down. Besides that looks good though👍
😮😮😮😮😮 wow
Looked better when you first removed it from the box lol.
Bro the wing mounts are supposed to be mounted on the rear bumper so the wing is at the correct angle and doesnt peak like 2 inches above the body
Great build, maybe change the wing to something that’ll fit the look, overall..still looks awesome!! 🤙🏽🤙🏽🤙🏽
looks great if you’re under the age of… hmm… maybe 10? Even then, I’d still consider u slow.
I think killerbody has the best prepainted bodies. I dont own any but they look the best. I have a yokomo yd-2e carbon fiber chassis version, and for a kit I love it. Im going to get a yokomo ae86 body so I can stick the magnets on the dimples so I dont have to set up the mounts custom. The magnet will be in the rear window but im okay with that. I can remove a magnet from a clear surface without messing up paint anyways if I do get different rear mounts. Ebay magnet mounts work fine though. Cool video.
So is the series doa?
Yeah, it's done for now.
-Brett
Don't want to be that guy, but twin turbos and a blower? does that work
Yep, it's called twin charging. Check out the old lancia s4 group B race car. Good example 👍
Tell me the drifter side of the hobby is the most pressed without telling me the drifter side of the hobby is the most pressed=read these comments.😂😂😂 But for real, ya'll think that wing mount is a troll move?? 😂🤨
The R31 body is slightly longer than any other drifting bodies, so it won’t fit in many carrying cases🤣🤣🤣 I have to carry it separately each time.
👍🏾👍🏾👍🏾👍🏾
I thought that was a Fox Body Mustang at first.
Nice video and effort. You needs gloves.
Um blower and turbos??
It's called twin charging. The old lancia s4 rally car had that setup.
Looks like a Foxbody mustang
LIKE 👍👍👍👍👍👍👍👍👍👍
Can I have the old one ?
Hi Brett, that killer body really looks killer, but when I saw 👀 the price of the magnets 🧲 I went oooph, nah way too expensive for me, but whatever floats yer boat 🚤 man. Super nice video guys. 😎👍👍👍🇬🇧
looks great but the supercharger needs to go
LOL wow
Kneesarn
Is this aprils fools day 🤔
??? Your Nissan skyline body at fast look ,Like Old mustang 5.0 fox body !
Yeah... that's rice bro
looks like a fox body mustang to me not a nissan
Cool car but I really can't stand the wing at 11:11
Twin turbo should feed the intake, which it isn't... Looks less legit
Yes, it's talked about in the video.
-Brett
supercharger and turbo come on thats to much power for drifting
Hello people lol
DS rims are overrated to me. They do not fit on any MST chassis, that I have, without taking off the rotors and replace the calipers with regular hex adapters because the inner diameter on the backside of the rim is really narrow than any other rim I've used Also, depending on the body, you can't really get a deep offset look because the tires stick out way too far, making the car look ridiculous. And yes, the chrome finish doesn't allow the inner rim to seat properly with doing a whole bunch of tedious sanding. The black and other color rims have no issue because it's just straight plastic, no paint dip.
They look cool and scale, but I've found them to be non functional garbage meant for display chassis only.
Can you customize a drift car for me
incorrectly mounted wing. It should be down by the license plate. MOST bodies can’t use a chasis mounted wing without modification.
Wtfff did you do to that thing😭😭
in before jdm fans calls this riced.
Ever seen an Aussie burnout car? They look no different than this.
Bro, that's a Fox body Mustang, not a Nissan.
Triple charged not realistic but sure
Goofy ahh car
I had to look at the date because seeing this short bus special drift body I thought is was April fool's 😂🤣😂🤣
When that wing looks that stupid, bro...get it outta here, it don't look good, since you can't angle it! 🤦🏼♂️
turbos must feed the generator for an emergency refrigerator cuz they sure cant feed the motor if the supercharger is drawing air from the scoop on top of it. yea i know its an rc car but immediately killed the immersion for me seeing such an obvious issue. i suppose you could run some air tubing from the hood up to the supercharger to make it look plausible. or i can go f- off too.. just my 2c. ive enjoyed the build so far.
It's called twin charging.. look up the old lancia s4 group B race car.. 👍
you spent the entire video correcting yourself?
Испортили такой красивый кузов ((( R.I.P.
i know its a hobby and what not but God that is horrendous.
Before was better :/
title should of been, "how to ruin a killer body R31 shell" can't believe you did this in you're video I get it tho. ur advertising all the available parts or things you stock or sell. but jesus christ this is sad