DIY - dremel sanding drum/band making
ฝัง
- เผยแพร่เมื่อ 24 ต.ค. 2021
- #dremel3000 #DremelTool #Dramel #DremelSandingTool #DremelToolDIY #MakeDremelTool #HandmadeDremelTool #DremelRotaryTool
Hello.
This is MacGyver K.
I made my own sanding drum for my Dremel 3000.
Since the mini sanding tool is inconvenient, I made a drum tool that allows for bigger and faster sanding using a wooden stick.
I hope this will be useful information for those who use Dremel.
Have fun watching it~ - แนวปฏิบัติและการใช้ชีวิต
![🤫 TRICK YOU DIDN'T KNOW ► How to make HOMEMADE SANDPAPER for DREMEL [ALL SIZES]](http://i.ytimg.com/vi/bnOx0kgmwDA/mqdefault.jpg)
![เบิ้ล ปทุมราช - อ้ายกินดอง น้องลาบงัว ft. สแน็ก อัจฉรีย์ [OFFICIAL MV]](http://i.ytimg.com/vi/-OK--KaSPcI/mqdefault.jpg)
This is great! This is the only tutorial I’ve seen that deals with making removable bands, thank you so much!!!
Your praise is undeserved for me. thank you:)
Brilliant🤗🤗
Я делаю что-то подобное но из металла, а валы у меня из резинки. Беру металлическую трубку пропил по перек. Заранее заготовлен резиновый вал на 2мм меньше металлической обойму. Оборачиваюсь обойму наждачной концы закажу в прорезь разводя по разным сторонам. Вставляю вал резиновый и начинаю затягивать. Вал резиновый начинает сжиматься тем самым становится больше диаметром, он зажимает концы наждачки и диск готов .
Thanks my friend
이번엔 엄청 재미나게 영상 만드셨네요.. 첨에 팍팍 칼던지고 해서.. 놀랐습니다.^^
큰 드라멜 센딩툴이 여러개 만들어 졌네요...^^
아직도 어설픈데요ㅎㅎ아무튼 감사합니다^^
Sağol Usta 🙌🛠️⚙️🔩⚡👍🔥
Hola amigo espero que estés bien muy buena idea para pulir maderas gracias me va a servir saludos desde alerce región de Los Lagos Puerto Montt
hola amigo gusto en conocerte Me alegro mucho de que este vídeo te haya sido útil.
Спасибо большое я делаю на свою дрель!
nice job !!!!
Thank you~🙂
quisiera hacer una lijadora como la que colocas para desbastar los conos
Hola amigo! El mejor tutoreal... Queria saber que material usaste para recubir el cilondo de madera (material color negro)
Saludos desde Argentina
Se utilizó Non-stop pad (almohadilla de goma antideslizante). gracias
👏👏👏👏👏👏👏
💪💪💪💪
😁😁
Hello: What is the name of the tape you used to seem the sandpaper together? Thanks
You mean black masking tape?
Love the idea. Was the "rubber" you used on the dowel a silicon. Where did you get that nice piece of rubber?
yes. This piece of rubber is non-slip rubber. This is a non-slip rubber pad used in front of the driver's seat inside the car.
Можно взять старую или купить камеру для Велосипеда
Olá que fitas você usou. e onde se compra destes parafusos Obrigado
olá. Eu usei fita de papel. Os parafusos foram comprados on-line, mas se você não tiver certeza, terá que procurá-los em uma loja de parafusos.
¿Me podrías decir los diámetros de los palos redondos y que material pusiste pegado a los cilindros de madera?.
Gracias
El diámetro del cilindro de madera es de 15 mm a 30 mm. Usé almohadillas de goma y pernos de acero inoxidable.
@@MacGyverK Muchas gracias
👍❤🌹
Где взять насадку в которую ты закрываешь деревяшки ? Как называется?
Я не могу понять, о какой части вы говорите.
Watch out for speed, if the bit is over weight it can snap the shaft when you turn the machine off.
Nice one. What are those screw set called?
It's called a dremel rotary tool kit.
Really?@@MacGyverK
Hola y cómo se llama ese tipo de tornillos?
Perno de llave hexagonal de acero inoxidable.
Radius*3.14=length?
Es!
4:01 D*3.14
Yes it kinda look more like black duct tape, Masking tape hold it good to where it dont seperate, Thank You again.
you're welcome:)
The band is too loose. It keeps slipping. But nice try though.
хрень... шкурку как-то поджимать надо... иначе на 20 минут работы
Sir glue name
Well...seeing as you don't feel the need to explain anything...
Was there eventually problems with the sandpaper slipping on the rubber? Its a great idea for making odd sizes! Your mom;s going to be pissed because you pretty much ruined her scissors!!!
This sandpaper didn't slip at all because of the rubber. I often come up with strange ideas. And these scissors are mine, and my mother has no reason to be angry.