Any reason that it’s sticks to the chrome badge but not the paint.. that’s bloody interesting, I just purchased a 2020 Santa Fe, I will give this a crack
Not going to look through all the comments, perhaps this has already been asked, but wouldn’t it be cleaner and EASIER to remove the emblem, paint it, (plasti dip) it then replace the emblem?
Honestly no. It'll take more time removing the emblem since it is 3M double sided taped onto the car. Plus, you'll then have to spend the time removing all the leftover adhesive before putting it back on. Takes no time at all to tape the square and peel off the access plasti dip.
I can't remember how long I had it on the car, but if you do multiple thin layers to make it thick, it should last a good while! We've used plastidip for other car parts and it does well!
I have had my rear emblems done for over a year and they’ve seen two winters and they still look great. I did my front grill and it barely lasted but I think that was my fault for how I applied it.
honda4ridered I bet I would love it too if I had it on mine but I've heard from people that sometimes it won't even fit on the trunk, and some people say it does. So idek where to buy mine if I were to buy a set.
Somewhere around 5 minutes or so, they dry pretty quick which is nice! Do light even coats and that will give you the think layer so when you do decide to peel it all off, it will come off easy.
That shit is not as easy as it looks! I mean only the peeling part that shit was hurting my fingers and took me about an hour to get that clean look and that was just on the front one!
Really? If you do a lot of coats and its thick. It really comes off super easy. People just do a thin coat and complain with how hard it is to remove. All comes down to how think the coating is.
+MARCO Millionaire yup. Most likely it won't peal off while washing. You really need to scrape up an edge and peal it yourself for it to come off. Very durable
How about a light red spray on top...thats if you think you can make it look as if it has rd flakes. I have a White 2018 Elantra. I plan to do mine black as well but try to spray red on top hoping to make it look like red flakes or Red with Blsck flskes th-cam.com/video/Pd3ggm0p7_M/w-d-xo.html
The goal of this vid is to show that it is possible to do it on the car. It takes more effort removing the emblem and then reinstalling it, then peeling off the over spray
Just doing this in 2019 and followed everything except I used a Bobby pin and it came out beautifully. I have a Hyundai veloster
How long between coats did you let dry?
i jsut ordered some vinyl matt black wrap today, i was gnna take the emblem off and vinyl wrap it.. this would have been so much easier though...
Yeah wrapping tight pieces like this is pretty challenging. Dip or paint is way easier.
Any reason that it’s sticks to the chrome badge but not the paint.. that’s bloody interesting, I just purchased a 2020 Santa Fe, I will give this a crack
It will peel off the chrome badge if you start on the edge just like peeling it off the paint, but of course trying to cover up the chrome!
Not going to look through all the comments, perhaps this has already been asked, but wouldn’t it be cleaner and EASIER to remove the emblem, paint it, (plasti dip) it then replace the emblem?
Honestly no. It'll take more time removing the emblem since it is 3M double sided taped onto the car. Plus, you'll then have to spend the time removing all the leftover adhesive before putting it back on. Takes no time at all to tape the square and peel off the access plasti dip.
Just seeing this video and going to this to my Sonata, which will look good being she's metallic gray.
Isit a 2011?
@@keeganking7003 Yes she is
@@bishop7534 Nice i have a white one
I saw that this is from 6 years ago and was wondering how long it lasted and how well it weathered? I’m thinking about doing this to my emblems.
I can't remember how long I had it on the car, but if you do multiple thin layers to make it thick, it should last a good while! We've used plastidip for other car parts and it does well!
@@BrosFOURRSpeed I appreciate it :)
I have had my rear emblems done for over a year and they’ve seen two winters and they still look great. I did my front grill and it barely lasted but I think that was my fault for how I applied it.
HOW long did u wait before you started peeling..?
Give it like an hour.
But why did you dip it black? Just wondering😊 but you did it well 👍🏻
Nice video man! I'm thinking on doing this to mine or just getting the Genesis coupe emblem instead.
thanks. It was a fun project to try out. I kept it on for a few weeks, but im now back to the chrome wing badge. I love the wing!
honda4ridered I bet I would love it too if I had it on mine but I've heard from people that sometimes it won't even fit on the trunk, and some people say it does. So idek where to buy mine if I were to buy a set.
I ordered them from amazon. They will always fit but you do need new screws and washers to put them back in. Not to bad of a job.
Nice
Thanks! This was a fun project learning how to use plasti dip
looks awsome
+Sandwhich Thugg Thanks! It's an easy project to add some nice style
Sure is I did it on my elantra
Honda4RideRed
+Sandwhich Thugg Awesome, I bet it looks super cool!
Sandwhich Thugg just bought a 2017 Elantra GT hatch. Bout to do this today !
Did you do this to your rims as well?
how long did you wait between coats for it to dry?(I know until its dry) but how long exactly
About 10-15 minutes. Basically when I started seeing the gloss apearence go away.
what spoiler is that ??
How is it going through car wash?
I never bring my cars through an automatic car was :). But I'm sure it'll hold up just fine
Plastdip in us 6$ plastidip in canada 25$
Yea no shit eh?!
how did you get over spray through the paper? 🤔
weird.
How long should I wait for in between the 4 coats? How much time basically should I wait after each coat
Somewhere around 5 minutes or so, they dry pretty quick which is nice! Do light even coats and that will give you the think layer so when you do decide to peel it all off, it will come off easy.
That shit is not as easy as it looks!
I mean only the peeling part that shit was hurting my fingers and took me about an hour to get that clean look and that was just on the front one!
Really? If you do a lot of coats and its thick. It really comes off super easy. People just do a thin coat and complain with how hard it is to remove. All comes down to how think the coating is.
How long to dry in between coats?
Price
Plastidip is around $8 a can, somewhere around that.
Great job, keep it up
What will be the lifespan for this?
At least a couple years, I never had any issues with it pealing off or anything. Thicker coats will help it last longer.
Nice video , very informative speaking
Thanks! glad you liked it
+Honda4RideRed is it safe to wash.?
+MARCO Millionaire yup. Most likely it won't peal off while washing. You really need to scrape up an edge and peal it yourself for it to come off. Very durable
+Honda4RideRed thanks man really appreciate it... nice video BTW.👍👍👍
+MARCO Millionaire Yeh no problem!
what car is that?
Lamar Nedd hyundai genesis coupe
Thanks :D
Не проще было снять эмблему?
El mio sale contodo
y'all can get plastidip for 6 bucks a can? it's 20 up here....
Wow that's a lot. You could probably order it online and find a good price
Like 10 a can but gotta pay shipping and exchange and all that shit
+Medicated TV oh wow. Are you in Canada or something?
Yeah man
+Medicated TV Well, this one can still has a lot left in it. So it will definitely do several small projects.
How about a light red spray on top...thats if you think you can make it look as if it has rd flakes. I have a White 2018 Elantra. I plan to do mine black as well but try to spray red on top hoping to make it look like red flakes or Red with Blsck flskes
th-cam.com/video/Pd3ggm0p7_M/w-d-xo.html
You should've plasti dipped it before u put it on lol
The goal of this vid is to show that it is possible to do it on the car. It takes more effort removing the emblem and then reinstalling it, then peeling off the over spray
Looks 100% better,time well wasted.
Check out my veloster
Goo gone? If you rub it with a microfiber towel it will remove the over spray
Sam Cashman Yep, the rag and goo gone will get it right off
I am fully aware. I've dipped my rims emblems and trim on my SUV.