Not only those who have never tried it Paul but also a refresher for those who have tried it. Thanks for tuning in to the show and taking the time to leave your comment sir. It's very much appreciated.
Kenny this was such a well organized and explained video. I work out of a small shed so I could never fit a true jointer inside, so this was incredibly helpful!
I'm glad that you found it to be useful. This is an older video on the show and after years of edge jointing on the router table, the best advice I can give is to take small passes with the router. I believe in the video I adjust the fences to be about 1/8" off of each other. I would suggest a smaller offset. Possibly around 1/16" or less. You will get better results and less tear out on the wood. Thanks for tuning in and for the kind words.
That's a super sweet router table. I have a Botch tabletop that I've gotten decent results after some trial and error. The trick is getting the out-feed fence aligned with the cutter. I love the bearing idea. Thanks.
Thanks for the kind words on the router table. Using the guide bearing is a great way to set up the table for jointing. It's practically fool proof. I'm glad that you were able to take something positive away from this video. thanks for tuning in to the show.
Kenny this is a great idea I hadn't thought about so thank you! And thank you for the camera and editing work. I appreciate your videos and have learned from you. Peace be with you and your family! Rich
Showing everything that a router table can do Mark would be a pretty expensive series. Do you have something specific in mind that you would like to see? Either way, thanks for tuning in and for taking the time to leave your comment. I truly appreciate it.
@@acutabove_woodworkings I guess I wasn’t really thinking about cost and such…I really want to know more of what this table setup can do so hopefully you will use it more often 😁 Thank you for your reply
@@acutabove_woodworkings my career I was a Waterfront Mechanic repairing Containers, Chassis, Refrigeration etc but now retired and still want to work with my hands I am interested in doing more woodworking (wood chips/sawdust will decompose, Metal shavings never will) so I’m interested in learning more and more….Thank you
@@MechanicMark613 Sorry Mark. That wasn't supposed to say "expensive", it was supposed to say "extensive". I will see what I can do about producing some router table videos. Could be a fun series.
Great Video! Wonderful explanation and you helped me to purchase this fence above the woodpeckers one that costs significantly more then Mast R Fence II
thanks for the vid, I believe the router fence that comes with the sawstop router table is nearly identical to the jessem that these vid will work for me.
I hope you are right Dominic and that this video will end up being helpful. Thanks for tuning in to the show and taking the time to leave a comment. I truly appreciate it.
It seems like a lot of steps in the video but honestly, once you know how to do it, it takes about 30 seconds to set up. I too used to use a scrap board on the out feed table and that method works just fine as well. No need for the fancy things when there is a work around. Thanks for tuning in to the show Deborah and for taking the time to leave your comment. It's very much appreciated.
Jointing any board will only make one side straight. If you want parallel sides, you would have to run the board through the table saw with the jointed edge against the fence. You are 100% right though that jointing doesn't make parallel boards. Thanks for tuning in to the show.
@@acutabove_woodworkings Yea exactly, I think there’s still misunderstanding around the jointer because somehow people think they can just pass their piece on all sides and now all sides are parallel and square since everything is flat. But it’s not.
@@acutabove_woodworkings Since you’re here.. I’m currently thinking of the best way to set the bit depth relative to the fence, i.e. not the bit height but really the distance to the fence. It could be a nice subject for a video, do you use the scale on the sides of your Jessem fence? Do you use a digital gauge? Something else? I see most people setup their depth via trial and error and test pieces, I wonder if there’s a better way.
@@Maxime-ho9iv There is a HUGE misconception about the purpose of jointing wood and what it will accomplish. I get enough comments on the channel to see that constantly.
@@Maxime-ho9iv That would be a good subject to cover for sure. For me, I place layout lines where I want to router and use the micro adjust to get the bit aligned with those layout lines. I then adjust me fence scales on either side to reflect the same measurement. (the measurement really doesn't matter as it is just a reference point). I then can re-adjust the fence using the fence scale and micro adjust for subsequent routings. I hope this makes sense.
I believe the rod you are referring to, is for the mitre slide on the fence. The fence itself runs in T-tracks mounted along the edges of the router table. If you are interested in information about this router table, I have a review of it on the channel. You can find it here. th-cam.com/video/Tb0mJqbHQN0/w-d-xo.html Thanks for tuning in to the show, I hope it helps.
That's a great idea. Anything that can bring the out-feed table out slightly further than the in-feed will work. You don't need to take a large bite of material and 1/16" would be perfect. Good luck with your jointing. Thanks for tuning in and for the subscription. Glad to have you aboard as a viewer.
This show was a response to a viewer request Al. If you are interested in router table jointing but don't have the fancy router table like I have in this video, you can watch my original video demonstrating how to do it on a normal router table and fence, without all the fancy gadgets. I hope this helps. Here's a link. th-cam.com/video/fdHvU-IeEJU/w-d-xo.html Thanks for tuning in to the show.
Kenny, good video and good information for those that have never tried this process. Good good information.
Not only those who have never tried it Paul but also a refresher for those who have tried it. Thanks for tuning in to the show and taking the time to leave your comment sir. It's very much appreciated.
Kenny this was such a well organized and explained video. I work out of a small shed so I could never fit a true jointer inside, so this was incredibly helpful!
I'm glad that you found it to be useful. This is an older video on the show and after years of edge jointing on the router table, the best advice I can give is to take small passes with the router. I believe in the video I adjust the fences to be about 1/8" off of each other. I would suggest a smaller offset. Possibly around 1/16" or less. You will get better results and less tear out on the wood. Thanks for tuning in and for the kind words.
That's a super sweet router table. I have a Botch tabletop that I've gotten decent results after some trial and error. The trick is getting the out-feed fence aligned with the cutter. I love the bearing idea. Thanks.
Thanks for the kind words on the router table. Using the guide bearing is a great way to set up the table for jointing. It's practically fool proof. I'm glad that you were able to take something positive away from this video. thanks for tuning in to the show.
Great demonstration. Thanks for the video.
Glad that you liked it. Thanks for tuning in to the show.
Kenny this is a great idea I hadn't thought about so thank you! And thank you for the camera and editing work. I appreciate your videos and have learned from you. Peace be with you and your family! Rich
Glad that you enjoyed the show Rich. Thanks for tuning in and good luck with your edge jointing.
I have the exact fence this was very helpful thank you very much 👍
You're very welcome. I'm glad that you found it to be useful. Thanks for tuning in to the show.
I have that fence and phenolic table with the Jessem lift. I have a set of 4 bearing flush trim bits, will have to change my collet to 1/4".
Good luck on your edge jointing. Thanks for tuning in to the show.
Installing tomorrow, thanks
Good luck on your installation. I wish you all the success in the world. Thanks for tuning in to the show.
I have your exact JessEm Router setup and would love to see everything you can do with this Router Table setup 👍
Showing everything that a router table can do Mark would be a pretty expensive series. Do you have something specific in mind that you would like to see? Either way, thanks for tuning in and for taking the time to leave your comment. I truly appreciate it.
@@acutabove_woodworkings I guess I wasn’t really thinking about cost and such…I really want to know more of what this table setup can do so hopefully you will use it more often 😁 Thank you for your reply
@@acutabove_woodworkings my career I was a Waterfront Mechanic repairing Containers, Chassis, Refrigeration etc but now retired and still want to work with my hands I am interested in doing more woodworking (wood chips/sawdust will decompose, Metal shavings never will) so I’m interested in learning more and more….Thank you
@@MechanicMark613 Sorry Mark. That wasn't supposed to say "expensive", it was supposed to say "extensive". I will see what I can do about producing some router table videos. Could be a fun series.
@@acutabove_woodworkings 😂😂😂 that would be awesome…Thank you
Great Video! Wonderful explanation and you helped me to purchase this fence above the woodpeckers one that costs significantly more then Mast R Fence II
Glad that you liked the video and found it useful. Thanks for tuning in and for taking the time to leave the kind words. It's very much appreciated.
Have the stock guides for my router table and my table saw fence.
Sounds like you're all set.
thanks for the vid, I believe the router fence that comes with the sawstop router table is nearly identical to the jessem that these vid will work for me.
I hope you are right Dominic and that this video will end up being helpful. Thanks for tuning in to the show and taking the time to leave a comment. I truly appreciate it.
@@acutabove_woodworkings Lee valley thanks your channel for my money :)
@@dominicdiclemente8877 You should see how much of my money they have. LOL.
This is a nice feature but a lot of steps. I usually just clamp or stick a thin sheet to the left fence. Excellent tip on the micro adjust.
It seems like a lot of steps in the video but honestly, once you know how to do it, it takes about 30 seconds to set up. I too used to use a scrap board on the out feed table and that method works just fine as well. No need for the fancy things when there is a work around. Thanks for tuning in to the show Deborah and for taking the time to leave your comment. It's very much appreciated.
@@acutabove_woodworkings I guess you are right, once you start doing it its quick and convenient.
@@debandmike3380 Both methods work just fine Deborah. Rock what you've got.
Excellent
Glad that you liked it Ken. Thanks for tuning in.
It also shows beautifully that jointing doesn’t make the sides parallel.
Jointing any board will only make one side straight. If you want parallel sides, you would have to run the board through the table saw with the jointed edge against the fence. You are 100% right though that jointing doesn't make parallel boards. Thanks for tuning in to the show.
@@acutabove_woodworkings Yea exactly, I think there’s still misunderstanding around the jointer because somehow people think they can just pass their piece on all sides and now all sides are parallel and square since everything is flat. But it’s not.
@@acutabove_woodworkings Since you’re here.. I’m currently thinking of the best way to set the bit depth relative to the fence, i.e. not the bit height but really the distance to the fence. It could be a nice subject for a video, do you use the scale on the sides of your Jessem fence? Do you use a digital gauge? Something else? I see most people setup their depth via trial and error and test pieces, I wonder if there’s a better way.
@@Maxime-ho9iv There is a HUGE misconception about the purpose of jointing wood and what it will accomplish. I get enough comments on the channel to see that constantly.
@@Maxime-ho9iv That would be a good subject to cover for sure. For me, I place layout lines where I want to router and use the micro adjust to get the bit aligned with those layout lines. I then adjust me fence scales on either side to reflect the same measurement. (the measurement really doesn't matter as it is just a reference point). I then can re-adjust the fence using the fence scale and micro adjust for subsequent routings. I hope this makes sense.
Can you share details on the rod behind the fence that allows you to move the entire fence backwards and forwards?
I believe the rod you are referring to, is for the mitre slide on the fence. The fence itself runs in T-tracks mounted along the edges of the router table. If you are interested in information about this router table, I have a review of it on the channel. You can find it here. th-cam.com/video/Tb0mJqbHQN0/w-d-xo.html
Thanks for tuning in to the show, I hope it helps.
You could use a toe kick on the outfeed... cheap and 1/16
Got another subscriber for this video..!
That's a great idea. Anything that can bring the out-feed table out slightly further than the in-feed will work. You don't need to take a large bite of material and 1/16" would be perfect. Good luck with your jointing. Thanks for tuning in and for the subscription. Glad to have you aboard as a viewer.
Nice!
Glad that you liked it. Thanks for tuning in to the show.
If I could afford these elite accessories,I wouldn't be here on TH-cam looking for info or advice.
This show was a response to a viewer request Al. If you are interested in router table jointing but don't have the fancy router table like I have in this video, you can watch my original video demonstrating how to do it on a normal router table and fence, without all the fancy gadgets. I hope this helps. Here's a link. th-cam.com/video/fdHvU-IeEJU/w-d-xo.html
Thanks for tuning in to the show.