Thank you! I was getting stuck on the top cross section, but I was misunderstanding what to look for in that step. For those who are stuck on that step, you are JUST trying to get those four edge pieces flat with the center piece, you're NOT trying to put them in the right positions just yet. Once the edge pieces make a flat cross, that's when you know you can move on to the next step. Those next steps will reposition the edges into the correct points.
Dude. You were so thorough up until the last part and then you decided to solve without explaining what you are doing. 30 more seconds and this would have been the only video I needed. Did you have to go somewhere?
I figured out on my own already knowing how to solve a 3x3 but it took me a couple of hours as it was so confusing. I'm still finding the last layer a real pain.
Dude… y’a know, you video says “how to solve a mirror cube” but you didn’t explain everything perfectly on step 6 (the last step). Like you turn the cube and said everything is on the right place. MAN MINE HAS TWO SOLVED EDGES… WHERE THA HELL DO I TRUN
Don't feel bad, keep practicing, one day can do it. I also couldn't solve the 3 by 3 one day, now I can solve it in 2 minutes. I also believe that I can also do better than that.
Okay so the first 2 layers are similar enough but the beginner's method I learned for the top layer is different and simpler. Let me explain: First, note the position of the edge pieces: If they look like a small L, or a sitting man, position them so that the man's head is looking at the top left corner piece. ⬜️🟨⬜️ 🟨🟨⬜️ ⬜️⬜️⬜️ (the color of white tiles doesn't matter) If it is a straight line, position it horizontally 🟨🟨🟨 And if no edges are yellow (considering your top layer is yellow) any position would work. Then repeat the algorithm F U R U` R` F` until you have a cross. Now that you have your cross: If one corner piece is yellow, position top layer like this: ⬜️🟨⬜️ 🟨🟨🟨 🟨🟨⬜️ If two are yellow, hold the cube so that the front face has a yellow corner on it. If none are yellow, hold the cube so that a yellow corner is on the left face. Then repeat the algorithm R U R' U R U2 R' until the whole top layer is yellow. Don't forget to position the top layer according to the instructions I wrote above. It usually takes 2-4 times to get the top yellow. Next, solve the corners. So you will most probably have a side with the corners in place, rotate the cube so that this side is in the back. If no corners are solved, it doesn't matter which side is in the back and you'll have to do this algorithm twice, after the first time you will most certainly have a solved pair of corners. The algorithm is R` F R` B2 R F` R` B2 R`2 By now you'll have everything solved except for the top edge pieces. To solve them, if you have a fully solved side, put it in the back and look at the unsloved edge piece in the front. If it goes left, use the algorithm F2 U R` L F2 R L` U If it goes to the right, replace U`s by U. And your cube is solved.
You dont make sense at all. Definitely not simpler, you said: If you have NO YELLOW, then hold the cube so that a YELLOW CORNER that WE DONT HAVE is on the left face. Disregard your little "simpler" method.
THANK YOU I FINALLY SOLVED MY CUBE IT WAS UNSOLVABLE FOR 1 YEAR BUT at the last step when i had to flip 2 pieces i used the 3x3 algorithm which is R U R' U to flip it
The Cubicle sells a 4x4x4 mirror cube now. It's 3D printed extensions attached to a regular 4x4x4. I really want it, but it's huge (83mm) and kinda pricey at $45. As soon as someone mass produces a 4x4x4 mirror or ghost cube, I'm on it.
@@yourmomlookslikeurdad6588 I like it, but to be fair, I've only purchased cubes from the cubicle, or eBay. That being said, they have great customer service response, decent prices, and a great selection of cubes.
Thx I finally was able to solve the mirror cube😁But I was only able to solve it because I knew how to solve a 3X by 3X but I don,t recommend this video to people who don,t know how to solve a 3X by 3X watch a detailed how to solve a 3X by 3X then it will be more easy for you!😄
OMG!! Thank you so so much!!! I had my mirror cube for more than six months but I couldn't solve it and I had given up, but your video help me FINALLY solve it😱😱! Thank you so much! Please keep up posting. You're amazing 🤩
Bro in my opinion you don't deserve to teach solving any cube. Because you solve at such a speed that beginners can't follow the moves. I had to put my video speed in 0.5 and 0.25 to see some movies because some may not know how to solve the cube using the equation. So kindly try to do more videos by decreasing your speed, don't take this in any bad ok bro. 😊😊😊
I bought one of these last year as a bit of a novel variation. They look so cool scrambled!...it was an enoyable solve but I haven't done a re-scramble since! I prefer to speed train on a standard 3x3....'cos I'm a bit crazy.....
At the moment of 7:31 and 7:54 i am so glad u showed the algorithm bcz when i did the 7:54 algorithm my mirror cube is like "ok fine i will let him solve me " and it got fully solved
I was searching for the last layer tutorial, after i watched this video i found that the only difference betweena normal 3x3 is instead of cross, u need to make a line for the last layer (beginner's method)
This is extremely confusing. I've been solving cubes for a year now and even I struggled to understand this a bit. I feel more sorry for beginners watching this video after learning how to solve the 3 by 3. Please be more explanatory while teaching. Just moving the cube and showing notations won't cut it I'm sorry to say.
I need to thank You again!You are best thank You,You are very very very very very good person and you Tech me how to solve 3&3 and now Mirror Cube thank🎉❤
Thank u so much I thought I was so dumb for scrambling it and thought I couldn’t solve it but when u said it was just like the 3x3 I did it in an instant with ur video thx bro
I'm only having problems specifically in step 3 when I want to put a piece in the left side, it always messes up the cube, aside from that, everything is good
I’m having the same issue. Following the step to put the piece (middle piece of top layer) to the left side (of 2nd layer) ends up messing the bottom layer.
THANK YOU I HAVE BEEN LOOKING FOR TUTORIALS AS EASY AS THIS DIS IT ON MY FIRST TRY!, I LIKED AND SUBSCRIBED WITH NOTIFICATIONS ON! BTW I AM A 10 YEAR OLD WHO SOLVED IT WITH YOUR TUTORIAL ONLY THANK YOU SOOO MUCH!!!!!!!!!!!!!!!!
It is actually easier than u think, I already know how to solve a normal 3x3 and I mastered this cube in like 10 minutes. You just gotta find the thinnest pieces and make the cross and then I find a piece that matches the thickness of another and put in the edges. The top layer explains itself.
Thank you! I was getting stuck on the top cross section, but I was misunderstanding what to look for in that step. For those who are stuck on that step, you are JUST trying to get those four edge pieces flat with the center piece, you're NOT trying to put them in the right positions just yet. Once the edge pieces make a flat cross, that's when you know you can move on to the next step. Those next steps will reposition the edges into the correct points.
that looks like the password google wants me to use.
Fr
Best comment!!!
@@TfmCoolpurplegtt😢
Dude. You were so thorough up until the last part and then you decided to solve without explaining what you are doing. 30 more seconds and this would have been the only video I needed. Did you have to go somewhere?
Yeah.. I have my cube.. I'm that condition.. .. The last step Is what I need too
Lol 😂
This is basically the same as a regular cube. If u know the steps its not hard. Its literally the same algorithm!!
use this video to help you th-cam.com/video/HzEEBBFnJyo/w-d-xo.html
@@unaisadora6700 I know how to solve a regular cube but I dont understand the last part
i wish i saw this when i was learning mirror cube 😂
I can already solve a mirror cube
Or real
Emmmmmm ?????? I am 78
Lol why it's just as easy as a 3v3, only requires a little thinking to understand the mechanics
@@bagoffries6691 old fart
Thank you. I was actually losing my mind over this. The little details that you gave about matching up heights. Saved me.
i disagree cuz every time i’m one step away from solving this thing it just messes up
I figured out on my own already knowing how to solve a 3x3 but it took me a couple of hours as it was so confusing. I'm still finding the last layer a real pain.
Are u STILL finding ?
@@Kavin_gamez I can recognise what PLL I have now but sometimes I screw up the algorithm cos I can't do it fast enough.
So true
me to, lol
Thank you sooo much at my first attempt in mirror cube I have solved it!! It is same like solving normal 3×3 rubix cube in beggners method.
Yo! Thank You To You, I Now Learnt How to solve a mirror cube!
i learned how to solve this cube too . Thanks simon
Hey you only did a checkerboard in the thumbnail
I’ve just got a mirror cube and accidentally scrambled it up so this will really help
Dude… y’a know, you video says “how to solve a mirror cube” but you didn’t explain everything perfectly on step 6 (the last step). Like you turn the cube and said everything is on the right place. MAN MINE HAS TWO SOLVED EDGES… WHERE THA HELL DO I TRUN
Thank you so much for posting this video. I love it. I learnt it in 30 minutes. ❤❤❤❤😊😊😊😊
My 10 years old son solved this for his first time in 20 minutes. I’m such a loser dad.
Don't feel bad,feel proud
No you are not a loser ..my dad tell me if you want to solve the rubix cube if you want to try
Thanks guys. Actually i was making fun of my self :-)
Don't feel bad, keep practicing, one day can do it. I also couldn't solve the 3 by 3 one day, now I can solve it in 2 minutes. I also believe that I can also do better than that.
lol
Okay so the first 2 layers are similar enough but the beginner's method I learned for the top layer is different and simpler. Let me explain:
First, note the position of the edge pieces:
If they look like a small L, or a sitting man, position them so that the man's head is looking at the top left corner piece.
⬜️🟨⬜️
🟨🟨⬜️
⬜️⬜️⬜️ (the color of white tiles doesn't matter)
If it is a straight line, position it horizontally
🟨🟨🟨
And if no edges are yellow (considering your top layer is yellow) any position would work.
Then repeat the algorithm F U R U` R` F`
until you have a cross.
Now that you have your cross:
If one corner piece is yellow, position top layer like this:
⬜️🟨⬜️
🟨🟨🟨
🟨🟨⬜️
If two are yellow, hold the cube so that the front face has a yellow corner on it.
If none are yellow, hold the cube so that a yellow corner is on the left face.
Then repeat the algorithm R U R' U R U2 R' until the whole top layer is yellow. Don't forget to position the top layer according to the instructions I wrote above. It usually takes 2-4 times to get the top yellow.
Next, solve the corners.
So you will most probably have a side with the corners in place, rotate the cube so that this side is in the back. If no corners are solved, it doesn't matter which side is in the back and you'll have to do this algorithm twice, after the first time you will most certainly have a solved pair of corners. The algorithm is
R` F R` B2 R F` R` B2 R`2
By now you'll have everything solved except for the top edge pieces.
To solve them, if you have a fully solved side, put it in the back and look at the unsloved edge piece in the front. If it goes left, use the algorithm
F2 U R` L F2 R L` U
If it goes to the right, replace U`s by U.
And your cube is solved.
I still dont get h
The cross...
@@mishitaki8323 That's not possible, either you haven't solved the middle layer properly, or the pieces on your cube are not arranged the right way
@@ahadmoeen4102 i got it now thanks
Went over my head
You dont make sense at all. Definitely not simpler, you said:
If you have NO YELLOW, then hold the cube so that a YELLOW CORNER that WE DONT HAVE is on the left face.
Disregard your little "simpler" method.
After 20 minutes of watching tutorials of how to solve a mirror cube, I finally solved it, Because of your video! Thanks simon!
Glad it helped!
That 1x1 cube…
Great video! :)
I don't have any mirror cube but still watching this video very carefully 😂
Sir it is very helpful thankyou very much
it is nice that he has hearted every comment but he deserves a million subscribers : )
Yeah, really cool dude!!
Thank you so much now I have learnt to slove a mirror cube
Again thanks for your help.
THANK YOU I FINALLY SOLVED MY CUBE IT WAS UNSOLVABLE FOR 1 YEAR BUT at the last step when i had to flip 2 pieces i used the 3x3 algorithm which is R U R' U to flip it
I thought mirror cube was harder. But after seeing this video I told myself, "hey, its the same trick I use to solve regular 3x3 cube"
this is the first ive ever seen of a mirror cube and now its my favorite puzzle
Edit: i now own the 2 by 2 and 3 by 3 mirror cubes
The Cubicle sells a 4x4x4 mirror cube now. It's 3D printed extensions attached to a regular 4x4x4. I really want it, but it's huge (83mm) and kinda pricey at $45. As soon as someone mass produces a 4x4x4 mirror or ghost cube, I'm on it.
@@flatasacueball6326 So the cubicle is a good website?
@@yourmomlookslikeurdad6588 I like it, but to be fair, I've only purchased cubes from the cubicle, or eBay. That being said, they have great customer service response, decent prices, and a great selection of cubes.
@@flatasacueball6326 I've done some research on it. Just ordered hella new cubes, includeing this one
@@yourmomlookslikeurdad6588 btw: They now have 5x5 mirror cubes, and mirror AI cubes for $50.
Thx I finally was able to solve the mirror cube😁But I was only able to solve it because I knew how to solve a 3X by 3X but I don,t recommend this video to people who don,t know how to solve a 3X by 3X watch a detailed how to solve a 3X by 3X then it will be more easy for you!😄
I love how the thumbnail was just the checkerboard pattern
OMG!! Thank you so so much!!! I had my mirror cube for more than six months but I couldn't solve it and I had given up, but your video help me FINALLY solve it😱😱! Thank you so much! Please keep up posting. You're amazing 🤩
How did you solve it i cant get past the edges part
That's cool I wanna try
Wow thanks! I didn’t even know how to solve myself 😅
Bro in my opinion you don't deserve to teach solving any cube. Because you solve at such a speed that beginners can't follow the moves. I had to put my video speed in 0.5 and 0.25 to see some movies because some may not know how to solve the cube using the equation.
So kindly try to do more videos by decreasing your speed, don't take this in any bad ok bro.
😊😊😊
I already know how to solve one but I'll watch anyways, I'm the 69th comment too
Make sure you smash the like and subscribe!
Yeeeee
I bought one of these last year as a bit of a novel variation. They look so cool scrambled!...it was an enoyable solve but I haven't done a re-scramble since! I prefer to speed train on a standard 3x3....'cos I'm a bit crazy.....
@@thesimonshi yea but sometines you get lucky with the mirror cube
I haven't solved any cube yet but im going for the mirror cube
However im stuck on the top layer
(Edit: I've done it!!!!)
Im stuck with the second layer 😂
nice that you got it!
How
I’m stuck on the top layer 🥲
@@Treyzzy keep at it, i know you can do it!
I never have seen a mirror cube before. That's pretty cool
I Believe, you're the best👍💯! So awesome tutorial...
I Love it brother!
Thanks to teaching me how to solve mirror cube
Thanks dude!
Very useful for this mirror cube instructions
I had to put it at .25 speed
Thankyou so much brother
Thank you sooooo much this video helped me a looooooot
At the moment of 7:31 and 7:54 i am so glad u showed the algorithm bcz when i did the 7:54 algorithm my mirror cube is like "ok fine i will let him solve me " and it got fully solved
Thank you! I was stuck on the top cross.
The mirror cube stumped me at first but then I got it lol
Why do I watch how to solve tutorials on puzzles I don’t even have lol
Same
Same + i bought one I suck Tho
I do that too
*don't even have YET
@@hugotallys3576
Lol yep pretty much
I know already how to use 3x3 rubix cube
Now time to buy mirror cube and your. Mirror cube is smooth man 👍
8:03 So what do you do if your corner pieces don’t match but one of the corner pieces is in the right place?
i have same problem
Just keep doing it from teh correct corner
TYSM DUDE THIS HELPED A LOT
I was searching for the last layer tutorial, after i watched this video i found that the only difference betweena normal 3x3 is instead of cross, u need to make a line for the last layer (beginner's method)
Nice vid. I got it because of some of the video as well as some help from my previous knowledge of a normal 3x3 cube.
This is extremely confusing. I've been solving cubes for a year now and even I struggled to understand this a bit. I feel more sorry for beginners watching this video after learning how to solve the 3 by 3. Please be more explanatory while teaching. Just moving the cube and showing notations won't cut it I'm sorry to say.
I think I should stick to breaking it and putting it back cuz this brings headache, although some practice will make it easy.
I need to thank You again!You are best thank You,You are very very very very very good person and you Tech me how to solve 3&3 and now Mirror Cube thank🎉❤
You are most welcome! That’s amazing 🤩
I dont even know how can i solve this without ANY tutorial
wow your so fast at solving a mirror cube it just that I can't KEEP UP!
Thank you bro now I can finally solve my mirror cube
Also you'd be surprised step 7 actually works when you get to understand it
J am watching this cause i get one from amazon tmmr yay
I still don’t get it
Hi have tryed your way I have solved my mirror cube.
Yo dude you're so talented i love this
Great tutorial! I got it first try!!! 😅
Great job!
Thank u I know I can solve a mirror cube
Brought a rubik's cube to school and someone let me solve their mirror cube and now I have a friend
What's annoying with the mirror cube is that it always has 2 cores not parallel to the surrounding pieces of its side.
bro i've been searching for that
NICE thanks i can ALSO solve mirror cubes
Thank you it was helpful i done it thanku so much
Thank dude nice tips
May i did it to.
I was messing with my mirror cube in bed and mixed it up, this video helped me a lot
Thanks man you are best i was struggling with my mirror cube thank you!
Thank u so much I thought I was so dumb for scrambling it and thought I couldn’t solve it but when u said it was just like the 3x3 I did it in an instant with ur video thx bro
Great vid. 🤩
Thank bro it is so easy to follow 🎉🎉
Thanks 😊 and that’s awesome! Glad I was helpful!
You forgot to explain what to do whenever you don’t have that case
Love you bro 😎❤️
I don’t know how I never noticed it’s like a normal cube just a bit more funky ;-;
THANK YOU!!! got it!
Nicely explained 😊☺️
Thanks that helped a lot
Nicely explained
I'm only having problems specifically in step 3 when I want to put a piece in the left side, it always messes up the cube, aside from that, everything is good
I’m having the same issue. Following the step to put the piece (middle piece of top layer) to the left side (of 2nd layer) ends up messing the bottom layer.
Helped me very much
DONE!!!!! THIS TUTORIAL IS SOOOOOOOOOOOOOOOOO GOOD....
Thank you for making this video I almost lost my mind
THATS SO COOL THANK YOU
Awesome Tutorial!
i couldn't figure it out so i did what i do best. I took it apart and put it back together
What if the corners in step 6 were not in the right place
Thanks! Was able to solve it with this.
Can I use the same formula on mirror cube too?
THANK YOU I HAVE BEEN LOOKING FOR TUTORIALS AS EASY AS THIS DIS IT ON MY FIRST TRY!, I LIKED AND SUBSCRIBED WITH NOTIFICATIONS ON! BTW I AM A 10 YEAR OLD WHO SOLVED IT WITH YOUR TUTORIAL ONLY THANK YOU SOOO MUCH!!!!!!!!!!!!!!!!
calm own jamal im 11 lol
I Got This cube Yesterday and i have already learned it and i didnt even need help i did on my own
Will this work with a coloured mirror cube?
It's sad that this channel has only 33K subscribers...
Thanks for the tutorial!! :)
Loved it
Jk, I’m not a bot
Great vid!
Mirror cube is very fun and easy for me! And its exactly like 3x3 but shapes!
lol the 1 by 1 just sitting next to the megamix
Thx now time to buy a mirror cube
It is actually easier than u think, I already know how to solve a normal 3x3 and I mastered this cube in like 10 minutes. You just gotta find the thinnest pieces and make the cross and then I find a piece that matches the thickness of another and put in the edges. The top layer explains itself.
Your Asian so its easier for you
Thanks so much man it helped me A lot
What do I do if none of the corners are in the right place in the match corners step?
Thanks bro it worked