@@routefortysix bro I'm from delhi but yha kise ko b ye kaam krne bole to vo bol rhe hai ki jo T vala setup hai vo.... Ho hi nhi sakta ya phir ye bn hi nhi sakta
@@deepaksharma-cu1wq Bhai everything is possible... log avoid karte he coz 1) it's a bit technical as well as Geometrical work.. 2)it's time consuming job... Isliye log avoid karte he it's really not that tuff bas interest ki baat he...
@Vikas Acharya....Bro it's not just welded directly..I have put centre bar between 2 adjoining shaft and then welded so no need to worry...A proper so for electric welding spot can lift the weight of 1 ton ..Correct me if am wrong...
@@Porting_2stroke yes I respect your curiosity...But trust me I had did the same thing with my RX135 and used for 5 years for off roading and never got any trouble..
@Roshan Tulaskar...Bro all modification starts with problems and difficulties...But never get your aim down...Very common problem is to the set up of stock cone set..Anther thing you need to calculate the proper height of the T-Stem shaft...I have detailed video on my channel..Process is same for all bikes... Video link below:- th-cam.com/video/f4fwROp2zqU/w-d-xo.html
@@dhumalprasad09 cost will very as per the market you can find out near somewhere in your area brother...Still it's between 13k to 16k used one...Might be less in your area..
@kurup suresh...Hello..Nope you can't swap R15 transmission into FZ16 coz case is completely different..Yes after market 6 speed transmission is available..For more information kindly DM on Instagram@route_fortysix
Awesome work bro ! How much height difference was there in the original KTM T and the fz T ? Can I use the og KTM T without cutting ? Also did you fabricate the distance piece that you used below the bottom come set ? Where can I get that ?
@Ajinkya Nalawade...Thanks bro...There is huge difference between both T-Stem...You can't use stock KTM stock T for FZ coz the one sets are different...You have to fabricate the T-Stem..Getting T mod will allow you to use stock cone set which will be very convenient for the future..No I didn't fabricate the lower distance piece below the lower con... Instead of that I used old lower inner cone outer ..Place opposite side so that so support to increase the height..
Sir apki waja se mene bhi apni fz me usd forks lga lie hee👍👍👍
@Mohd Umair..Yes bhai congratulation..Share pic on Instagram..
Wooow bhai atlast super
@Sam Immanuel..Thanks bro...
Bohut din laga diya... But finally video aa hi gaya bhai ka 👍
@Akshaya Kumar Behera...Ha bhai thodasa time jyada ho gaya...But surely jaldi wind up karlege... pakka will keep updating..Thank you
Bro mere pas fz v2 hai mujhe b krna hai ye help chaye hai apki
@deepak sharma...Ha bhai aap laga sakte ho same process he...
@@routefortysix bro I'm from delhi but yha kise ko b ye kaam krne bole to vo bol rhe hai ki jo T vala setup hai vo.... Ho hi nhi sakta ya phir ye bn hi nhi sakta
@@deepaksharma-cu1wq Bhai everything is possible... log avoid karte he coz
1) it's a bit technical as well as
Geometrical work..
2)it's time consuming job...
Isliye log avoid karte he it's really not that tuff bas interest ki baat he...
@@routefortysix bhai aap kha se ho agar main kabhi vha aya to aap se hi krva lunga ye kaam
race ball is use modi ktm and fz ...or ktm only or fz only
@Richard Sawnkima Pro no-93...FZ stock
@@routefortysix in ktm triple claim it can use fz triple claim cone
Wat if the weld gave out?
@Vikas Acharya....Bro it's not just welded directly..I have put centre bar between 2 adjoining shaft and then welded so no need to worry...A proper so for electric welding spot can lift the weight of 1 ton ..Correct me if am wrong...
@@routefortysix bit ther is a risk involved that's all I'm saying
@@Porting_2stroke yes I respect your curiosity...But trust me I had did the same thing with my RX135 and used for 5 years for off roading and never got any trouble..
@@routefortysix damnnn😂😂
Bro is that t stem crct fit to fz
@Anandhu Omanakuttan....No it's not direct fit..It's need some turning work to install standard cone set on it....
Sir corn set fz ki lgya h ya duke ka
@Mohd Umair...FZ ki bhai
Passion pro me Yamaha FZ ka front shoker fit hoga kya?
@paras yadav... Yes bhai sab baith jata he par passion me bahot heavy ho jayega...
Meko bi krwana hai fz250 mai plz
Hritik roshan dikhra hai bahi😂😂😂😂😂
Bhai kam to perfect kiya..lekin speedometer ka sensor kaise lagaya wo explain karo
@Dhiraj V A.... Ok bhai will explain that as well in in next video for sure
Can you tell me which bike s fork you have used
How about speedometer? Working or not
Bhai mere fz ku modify karoge kiya AAP please
@Abdul Gaffar Syed.... Haha haha..insha'allah bhai...
Bhai ye bike road pe kab chalegi.. I'm waiting
@Harshal Khule.... Bhai ye bike chalne ke liye nahi banai he... Road par daudne ke liye banai he...Jokes apart bhai me too desperate to get it on road
Bhai head light fit karne main koi issue to nahi aya?
@saleem khan... bhai abhi tak headlight install nahi kiya he mene.. uska video bhi will share here no worry...
Stay tuned...
Fz ka speedometer ke hisab se key🔑 left mein hai.. Iske setting ke hisab se toh right side mein lag raha hai.. Toh phir kya karein
@Akshaya Kumar Behera....Yes for that you need to make a handle lock stopper according to the switch...
Bro esma handel lock kam kar raha ha k?
Bro where is test drive 😭
@mAtt coRbin... Yes bro will upload soon.. As am busy with other projects..
Bro only engine cc upgrade Ka Kitna karcha Aaya
Mst he bhai
Costing kitna aya isaka?
@Anil vsv... bhai 10 digit ka kharcha hua he front end par...
Finally the video I’m waiting for
@Vetrivel...Hey thanks buddy
Bhaii iska part 2 kaha hai 🤙 bohot existing hu part 2 ke liya
Bhai next video kab ayega
Nice work bro. I think u miss to install dust cap upper race brg.
@Sambhaji Patil...Thanks bhau...No I didn't forgot to install actually I lost it somewhere..But already got it new one...
@@routefortysix thanks bro.
Next video kab ayega bro
Bro I want to add USD to my re 500 classic what problems will I face
@Roshan Tulaskar...Bro all modification starts with problems and difficulties...But never get your aim down...Very common problem is to the set up of stock cone set..Anther thing you need to calculate the proper height of the T-Stem shaft...I have detailed video on my channel..Process is same for all bikes...
Video link below:-
th-cam.com/video/f4fwROp2zqU/w-d-xo.html
Thanks 👍👍 n hope to c ur completely done bike soon
Nice 1 Bro 😘🔥
@Sohail Shaikh...Thanks buddyyyyyy...
Next complete video kab ayega bhai.. I'm waiting
Hello FZ ko Yamaha Fazer में कन्वर्ट करके बताओ हमें एक वीडियो जरूर बनाएं
Top speed video kab ayega?
Help kr do
Best brother 💥
@Ankit Patole..Thanks bhava..
Bhai, installation ke baad riding height me kitna fark pada, aur ktm ke front suspension zyada soft hai ya fz ke telescopic supension. Please tell.
मेरी बाइक एफजेड को यामाहा फेजर में कन्वर्ट करना चाहता हूं इसलिए एक वीडियो बनाकर दिखाएं
Costing for front ktm unit installation?
@BHATKANTI... Bhai 6 digit cost hua he...
@@routefortysix wat is 6 digit costing?
@BHATKANTI...Bro 6 digit cost means.e.g 10000 plus...
@@routefortysix tell me cost for front forks and wheel
@@dhumalprasad09 cost will very as per the market you can find out near somewhere in your area brother...Still it's between 13k to 16k used one...Might be less in your area..
🙏
Bro Instagram pe request accpet kro
Areee bhaii jaldi banao bohot excited hu 🤙❤keep going on ✌🔥new video bhi nahi aa rahe hai
Does the fz key set work with this new setup ? I mean handle lock ?
@Projectaur....Yes bro you can install FZ's key set up but only thing you have to do is to remove the top plastic cover of the key set...
And handle lock???
Hi, is it possible to fix 6 speed gear box of yamaha R15 V2 in to yamaha FZ 16. Or any after market 6 speed gear box available.
Please reply.
@kurup suresh...Hello..Nope you can't swap R15 transmission into FZ16 coz case is completely different..Yes after market 6 speed transmission is available..For more information kindly DM on Instagram@route_fortysix
It’s been two years 😂
@Living dream...Yes bro it's been 2 years...Between this many up's and down's I have gone thruh..So never mind..Thanks for your support
When you will complete this project????
Good job bro. What ktm fork was used for this?
Awesome work bro ! How much height difference was there in the original KTM T and the fz T ? Can I use the og KTM T without cutting ? Also did you fabricate the distance piece that you used below the bottom come set ? Where can I get that ?
@Ajinkya Nalawade...Thanks bro...There is huge difference between both T-Stem...You can't use stock KTM stock T for FZ coz the one sets are different...You have to fabricate the T-Stem..Getting T mod will allow you to use stock cone set which will be very convenient for the future..No I didn't fabricate the lower distance piece below the lower con... Instead of that I used old lower inner cone outer ..Place opposite side so that so support to increase the height..