drev1 I know this is a few months later but just want to say, he might as well mention it in the comments just for fun. Or, if you have nothing nice to say, don’t even say anything because you’re being rude. Maybe go to English and Grammar class and learn how to spell “even”.
@@ferdifresh8464 what are you talkin about? Almost every skateboard is lower than $150. I'd say $125 is the average for a skateboard. I guess if you went with gold-plated 24-karat trucks and a supreme deck than you sure you could go over $150.
Great set up. I just finally bought a premium set up with sublmnl and brt with teak tuning and some dope swirl wheels. Now I understand. But it's one and done for me lol
for a straight grip gap, put the end of the grip where u want the gap to be, then cut the extra off and use the other factory cut end as the other side of the gap. it come out perfect every time!
A trick I learned to Poke holes into the grip is to take the axle of your tuck and stick it in through the back of the deck so you know where to make the hole. But you have to hold down the grip around the hole so you don’t get those nasty air bubbles. If you do get some grip stuck to your axle it’s easy to wipe it off with your fingers and it doesn’t affect your truck at all. Also if you buy cheaper trucks they tend to have the kingpin at the base plate of your truck stick out a bit, so it won’t be flushed with the board. You can file it down a bit and it won’t affect but if you chose not to your truck tends to easily fall off.
I actually went to black river site. Went through the catalogue and the most expensive set up you can build is like $170.00 between deck, trucks wheels and grip all separate. I know it’s fucking nuts that they can sell this fraction of a board for MORE than a actual board.
6:38 ‘’You know, actually screwing that nut on top.’’ Chuby you’re a Legend! Edit: 9:11 ‘’You take one of your nuts...’’ Chuby you’re such a F*cking LEGEND!!! Edit Number 2: 10:25 ‘’Your nut’s gonna get right stuck in there the wrong way and you’ll have to pop it out, put it back in the correct way.’’ WTF CHUBY YOU’RE SUCH A F*CKING LEGEND!!!
I used to play with Tech Decks so I decided to watch some videos and ended up finding out its an actual sport and that there are better brand decks. If youre wanting to promote the sport youre doing a good job and honestly make me wanna buy one lol. Keep up the videos
I realize this is an old video but when you cut the griptape for the "grip gap" why did you use the end you cut with your scissors to put on the gap side? You should have turned it around and used the perfectly straight edge they had cut already to put on the "grip gap" side for a cleaner appearance.
Yo, have you ever done an obstacles video? I've seen you do a deck collection but idk if I've seen a obstacle collection. Would be fun to see your favorites and what tricks are most steezy on what etc. Much love
6:24 “nut it off, really quick, simple.”
Chuby you are epic
ButterBench FB WOW THATS SUS AF
ButterBench FB u need to post
@@arizonayee2746 sry bro cant watch then 😂
Arizona Yee haha
K o z y _ f b w
Who keeps coming back to this video, I just find it so entertaining to watch. 😂
Meeeee
7th time for me
This is prolly the 50th time or 30
Yep
Me
14:23 he brushes hardware into trash😂
NOOOOO😂😂😭
I was literally looking at the comments to see if anyone else noticed
drev1 I know this is a few months later but just want to say, he might as well mention it in the comments just for fun. Or, if you have nothing nice to say, don’t even say anything because you’re being rude. Maybe go to English and Grammar class and learn how to spell “even”.
*OOF*
I love blink 182 dude
My heart skipped a beat when he brushed his hardware in the trash 🤦♂️🤦♂️🤦♂️
By the way, if you want your griptape cutouts to be straight, you can just flip over the bit that you cut so that you use the perfect line
*cost more than a very expensive skateboard setup*
Kogarashi beats actually cost more than a skateboard a normal good skate deck it’s crazy 😮
Right I have to skateboards and both of them were under 150 dollers
Colin Fischer ik so is mine too but a good skateboard is 100 and over so yea 😊 so I guess sometimes the fingerboard cost more it still blows my mind
boi u can spend 150 ez on a basic skate
@@ferdifresh8464 what are you talkin about? Almost every skateboard is lower than $150. I'd say $125 is the average for a skateboard. I guess if you went with gold-plated 24-karat trucks and a supreme deck than you sure you could go over $150.
9:26 "medium looshish"😂
I’m good, I’ll stick with my Tech Decks
john cenas voice: *ARE YOU SURE ABOUT THAT?*
Buy a broken knuckle if wanted
@Jc. Niles i think you should not tight them very hard because i think they will brake
Joshy Cosh yes
Says everyone that hasn’t tried a fingerboard that’s like saying you’d rather use a Walmart board than one from a skate shop😂😂
Great set up. I just finally bought a premium set up with sublmnl and brt with teak tuning and some dope swirl wheels. Now I understand. But it's one and done for me lol
You never bought another set up???
for a straight grip gap, put the end of the grip where u want the gap to be, then cut the extra off and use the other factory cut end as the other side of the gap. it come out perfect every time!
I should be editing a vlog but here I am watching a grown man play with a miniature skateboard with his fingers. But I love it!!! Keep it up man!
lmaooo i appreciate that man!
How to sum up this video: LIT.
Lit?
Windell Smith what
Jeff
A trick I learned to Poke holes into the grip is to take the axle of your tuck and stick it in through the back of the deck so you know where to make the hole. But you have to hold down the grip around the hole so you don’t get those nasty air bubbles. If you do get some grip stuck to your axle it’s easy to wipe it off with your fingers and it doesn’t affect your truck at all. Also if you buy cheaper trucks they tend to have the kingpin at the base plate of your truck stick out a bit, so it won’t be flushed with the board. You can file it down a bit and it won’t affect but if you chose not to your truck tends to easily fall off.
“We need to shove that back in there” Chuby you’re the best
I'm fine with my 12 dollar p rep
Cole Drinkwater lol same
Same
Cole Drinkwater same
Same
I have a *$20* p rep
😎😎😂
What about washers for the trucks???
same question here
14:24 lmfao the hardware goes into the trash
3:37 sick bars bro
?
@@sandradesmond4261 He's talking on beat for a while
2:16 its easy peasey lemon squezey. But sometimes its difficult difficult lemon difficult.
Don’t wanna fudge that one up Carl 😂
I hate how fingerboard setups are much more than a skateboards setup is
Well you don't have to spend even close to that. A broken nuckle is miles better then a techdeck
@@Rob.Brown13 of course
Thaguitargamer:-_- it’s because the demand for trucks and there is only 3 good truck company’s. Same with wheels.
there are more than 3 just go on instagram i know about 5 that arent dynamic blackriver or yellowood
Lol skate setups can be crazy expensive... Thinks about special trucks, limited edition decks or shaped ones, custom grip etc
11:25 "grip cap" dang chuby stop the cap
Tysm man!! I really didn’t know hot to put the trucks, tysm!! Have a nice day too!
I actually went to black river site. Went through the catalogue and the most expensive set up you can build is like $170.00 between deck, trucks wheels and grip all separate. I know it’s fucking nuts that they can sell this fraction of a board for MORE than a actual board.
6:38 ‘’You know, actually screwing that nut on top.’’
Chuby you’re a Legend!
Edit: 9:11 ‘’You take one of your nuts...’’
Chuby you’re such a F*cking LEGEND!!!
Edit Number 2: 10:25 ‘’Your nut’s gonna get right stuck in there the wrong way and you’ll have to pop it out, put it back in the correct way.’’
WTF CHUBY YOU’RE SUCH A F*CKING LEGEND!!!
Ayyyyyyyy my boi. Excited for the collection!
I watched this video when I got my new fingerboard. Thankyou very much chuby muffin or 'JEREMY'.😁
I used to play with Tech Decks so I decided to watch some videos and ended up finding out its an actual sport and that there are better brand decks. If youre wanting to promote the sport youre doing a good job and honestly make me wanna buy one lol. Keep up the videos
Really appreciate I was going to get my fingerboard without knowing how to build it and bye the way I subscribed to you on every device and liked too
IF there is one TH-camr i love,its you
7:53 Thats what he said
Probably one of your most specific and good video mann. We can tell u put a lot of time into it!
This setup is LIIIIIIIIIIIIIIITTTT
3:05 singuaalar im dead 😂
14:22 rip screws
I am coming to workshop!!
My man is on the grind
What’s up chuby great complete
Your the best at grip jobs and gaps!
I wish I could meet you sooooooo bad brooooo!
“I’m putting it just like oh shit”
Anyone know how to buy the pivot cups at 3:59 or what it’s called
Bro I think u are the greatest person who makes fingerboard review
I remeber watching this video ages ago. Here I am back again 😌
Your set up is 🔥🔥🔥
It was so funny when he brushed the hardware into the bin😂
"Pro bushing" I'm glad your successful with multi color compressed rubber. Not gonna lie you do a better grip job than me on my actual skateboard
Acid Tuning are my fav for Brt pivot cups
Love your video. And watch you for two years and I keep loving the content. 👍🏾🤙🏾✌🏾👌🏾🔥
14:21 Rip
Great video! Appreciate this!
Can you please review the origin fingerboard kit?
I’m gonna say it, scissors are the best way to cut grip
If you don’t want a defined angle
Lmao the “best bushing feel”🤣
Can you do another vid of how to customise your grip tape
16:00 note to self
You make the best videos ever chuby
Now you got me wanting a sblmnl dang.
Great video mr. Chubby muffin
I bought trucks that come with your bushings team tuning is my favorite brand for finger-boarding i am trying to get on the teak team
The Bakery stock is fly as all hell my guy! Will be copping some gear next paycheck!
Yoooo thanks bro
What size is the deck
jeremy ive been watching you since like, before 10k bro i love your vids
Ok just bought ur bushings from teak!
Love the weekly vids !
Keep it up!
Very enthusiastic 😂 love it. Nice board , great info. Until you really think about it, grip gap is a single cut before it’s applied. Shred on Brotha !
Just ordered my first fingerboard
I've always had a hard time screwing in the trucks, thanks
Same with me I hate that 😂
Congrats on 60k Jeremy! You’re awesome!
'' you don't won't to fudge that one up carl''
Your a legend chubby🤦♂️😂
“just wanna guesstimate”
Chuby Muffin 2019
I realize this is an old video but when you cut the griptape for the "grip gap" why did you use the end you cut with your scissors to put on the gap side?
You should have turned it around and used the perfectly straight edge they had cut already to put on the "grip gap" side for a cleaner appearance.
Just got some of those bushings 😀
Nice set up
These hate comments 😂 guys its a hobby if you love what you're doing then by all means spend all the money u want. Its about having fun anyways 😕
When you put the wheels on the fingerboard’s trucks, should I put the wheel first then the Bearing spacer?
You should review 4 corner fingerboards, cheap and insane quality, blessings! Love your videos
Man this video is really dope
I love these kinda vids!
*ITS MORE EXPENSIVE THAN A FULL SKATEBOARD SETUP*
excellent use of the curb your enthusiasm theme
10:21 ive never used lock nuts before, so whats the right and wrong way?
Happy 60k!!
Awesome Fingerboard!😎
Holy fuck I died 14:43 I didn't realize you threw away your bolts the first time around 😭😂
LOL
Do you guys have any washers on the trucks
If I was gonna watch any video on fingerboarding it would be you!
Dang I wish I had a pro fingerboard I still have a tech deck
I hope you get to a million subs soon
Thanks bro!
Is it cheaper to get the blackriver base plate and hanger separate or get the whole trucks?
I have the same exact bushings. Not just because it’s from teak I got the Sam exact color and stuff
Yo, have you ever done an obstacles video? I've seen you do a deck collection but idk if I've seen a obstacle collection. Would be fun to see your favorites and what tricks are most steezy on what etc. Much love
This was so helpful thank you so much
Cool setup😎😎😊 my setup is thrash to death
I love your videos and you hooked me on fingerboarding thank you very much.
Where’s the video of this boards first session?
Your my favorite fingerboarder, keep up the great work👍
I was watching you since 800 subs
Do you have a few tricks on a fingerboard
Where you at?
With that money you can buy a real skate
Just one skate? 😂
You can even buy 5 skateboards with tjat
Scott Baun i guess if you like walmart boards
So ?
@@scottbaun5353 is tjat a currency I don't know about? boi👏😐