I might be wrong, but I believe that you are always supposed to put the embossing folder in with the closed/seam end first to prevent the seam from cracking.
Cass J I agree with you as I feel putting the opened ends of the embossing folder could slightly shift one layer and cause damage or poor embossing over time.
I’ve got a FREE DOWNLOAD that provides product highlights, tips, pricing and a great Q&A section! It’ll be a great reference for you. Click here: lisasstampstudio.com/2020/08/cut-and-emboss-machine-guide-everything-you-need-know.html UPDATE: The NEW Magnetic Platform WILL BE available on September 1.
The new embossing machine is in the Annual catalog. You can also click this link for more information: I’ve got a FREE DOWNLOAD that provides product highlights, tips, pricing and a great Q&A section! It’ll be a great reference for you. Click here: lisasstampstudio.com/2020/08/cut-and-emboss-machine-guide-everything-you-need-know.html UPDATE: The NEW Magnetic Platform WILL BE available on September 1.
❤️ my stamp emboss cut machine easy to use easy to store Does a wonderful job and I’m so happy I ordered it --Thanks Lisa for taking time to show it off and explaining it all!
I just purchased the new embossing machine , I can hardly wait until it comes. Your video is very well done, it is very helpful, with clear instructions and tips. Thank you for the help-
This is an awesome embossing machine Denise!! Thanks for watching!! I’ve got a FREE DOWNLOAD that provides product highlights, tips, pricing and a great Q&A section! It’ll be a great reference for you. Click here: lisasstampstudio.com/2020/08/cut-and-emboss-machine-guide-everything-you-need-know.html
Lisa, Your videos are all excellent! I find you pleasant to listen too and your directions are clear and concise! Thanks for this video in particular. 😊
Thank you so much for your kind words and for visiting this video!! In case you did not know I am now live on the 1st, 3rd, and 4th Monday, and the 2nd Wednesday of each month at 8pm ET.
Thanks Lisa, I have the mini machine . This video was very helpful. Do plan on getting the bigger one but since the magenetic plate is not available I’m going to wait for those issues to be resolved and get it all at once. Hope it’s soon! Take care, stay safe.
Lisa, I thought that when using embossing folders you are supposed to put the folded end in first. I noticed that you put the open end first. Which is correct?
Kathy that is a personal preference. I have always put mine through open end first. I think there is less stress on the fold. Hope that makes sense!! Thanks for watching!!
Sheryl thank you so much for visiting!! I love my storage units!! Here is a link for my craft room favorites: lisasstampstudio.com/craft-room-favorites Just click the picture for more information!
Kim thanks so much for visiting!! No, not much force needed at all!! Here is a link to my online store to take a closer look: www.stampinup.com/products/mini-stampin-cut-emboss-machine?demoid=16275
Thanks so much for watching Terry!! I think you are referring to the wooden storage units from Stamp N Storage that I have in an Ikea shelf. Here is a link in my craft room favorites that may help. 🤩 Craft Room Favorites: bit.ly/3tHFG8g They are by far the best paper storage I have found!!
Suzanne thanks so much for watching!! I only have used the Stampin' Up! embossing machines. I personally feel hands down this new Stampin' Up Cut & Emboss machine awesome! Sorry I have no input on the papus machine.
Enjoy your videos. Do you have any problems die cutting the ornate layers on this new machine? Is there a special way of laying the die on the card stock?
Barbee thanks for watching!! I have not had problems with those dies. No special way of laying on the cardstock. I do run that through and then back through.
Lisa Curcio Lisa's Stamp Studio Then there must be something wrong with my die machine. When I lay it on straight, it is almost impossible to turn the handle. When I Place it at an angle, it will go thru but it is still kind of hard. May have to return it.
Lisa, I love your videos! The question I have is what is the measurement of the larger cut and emboss machine in a closed position? I have a customer who has a limited storage area and got rid of the old one because it took too much space. Thanks in advance!
I am on the fence about buying the new SU cut and emboss machine as I have Big Shot that serves me well. What is the difference that makes this one so much better and also can I use my magnetic plate from my Big Shot on the new machine? Your video was very good!
Fran happy to have you visit this video!! I can tell you this is an awesome machine. It is much lighter than the Big Shot, runs smoother and is more compact. You can use you plates from your machine, although it is not advised to do so. I hope this has helped you!! Thank you!!
I think all machines have a patent design which prevents other companies from blatantly duplicating your product without your consent. Question for you. I’m (not sure) guessing that this is the Platinum die-cutting machine licensed/designed especially for Stampin Up the same as the Big Shot was licensed/ designed for Stampin Up. That being said, will the Platinum parts (plated, base, magnetic plate, etc.) work with this machine? Great demonstration! I always look forward to your videos.
I have the Spellbinders Platinum 6 (6" platform) and it folds up to a compact size. This SU machine looks very much like the Platinum, though I like how the Platinum carry handle folds into the machine.
I was hoping that they were the same machine (Spellbinders Platinum and the Cut n Emboss) because that would mean that the cutting plates are the same. I was concerned because in the video she said that Stampin Up does not recommend that you use products from another company in this machine. So if the cutting plates are not the same, that means I’m always forced to order them. Not that I mind ordering products but sometimes you just want to be fiscally sound with your money and cut out the middle man, shipping costs, wait times, etc. and just hop in your car and pick up consumables like this from Michael’s or JoAnns. So that those $11 plates don’t end up costing $15.
I hope you can help me. I have the small cut and emboss machine from StampinUp it from day one, it’s a big struggle for me to cut some dies! It’s a struggle for me to align everything and can take me up to half an hour before I get one cut! Some days it works beautifully and others it just won’t work for me! Any tips, suggestions? I’m frustrated to now end!
Thanks for the demo on this with such great detailed info Lisa! I was hesitant to order since I already have a Cricut Cuttlebug, but the features of this SU! Cut & Emboss are SO much nicer! I think I just may have to take the plunge! 😆
Glad it was helpful! Patty you will love this embossing machine!! Thanks for watching!! I’ve got a FREE DOWNLOAD that provides product highlights, tips, pricing and a great Q&A section! It’ll be a great reference for you. Click here: lisasstampstudio.com/2020/08/cut-and-emboss-machine-guide-everything-you-need-know.html
Hi Lisa! Just a quick question, I had a lot of embossing folders for different name brands; would I be able to use those on this new machine? Thank you for your time on this and be safe.
Hi just received a new machine and was wondering can cut and embossed folders be used and I also have a thick sizzix die and can I use that with my new machine
Loved this ... I will be ordering it. I have a question though ... you put your folder in "upside down" ... ie: open end in first and you mentioned that, but not the WHY. I've always been taught to put it in closed end first ... is this the new rule then with these machines? does it matter?
Jeannette you will love this embossing machine!! I have been told both ways for your embossing folders to feed through. I have always put mine through open end first. Thanks for stopping by!!
Irene happy to have you watch!! Thank you for your interest in the Stampin’ Up! products. Unfortunately I’m unable to sell you products since I’m in the United States and the catalog will reflect U.S. pricing and products. In addition, my contract with the company prohibits me from selling outside the U.S. due to tax and tariff laws To see if Stampin’ Up! sells in your country, head over to the demonstrator locator at www.stampinup.com.
Peggy thanks so much for stopping by to watch!! The old magnetic plate is a thicker plate. The new magnetic plate is thinner. I do not think the "sandwich" would be the same thickness. Hope that makes sense.
Lisa, I am confused. I was told that the hinged edge of embossing folders should pass through a machine first so as to not create pressure on the hinge as the folder is being crunched through. In this video, you said to load the open ends first. Which is best?
Karen happy to have you stop by! Estimated width 9 1/2", Height 7 1/2 w/handle, Depth 6 1/2". Here is the link at my store to read more: www.stampinup.com/products/stampin-cut-emboss-machine?demoid=16275 Hope this helps!
Deepa glad to have you visit this video!!! Thank you for your interest in the Stampin’ Up! products. Unfortunately I’m unable to send you products since I’m in the United States and the catalog will reflect U.S. pricing and products. In addition, my contract with the company prohibits me from selling outside the U.S. due to tax and tariff laws To see if Stampin’ Up! sells in your country, head over to the demonstrator locator at www.stampinup.com.
Linda thanks so much for stopping by to watch!! Here is a link to my online store for this great machine!! www.stampinup.com/products/stampin-cut-emboss-machine?demoid=16275
Brodie thanks for stopping by to watch!! I flip my plates back and forth, and side to side to help prevent the bowing. I have had better results with this machine!!
I have read that Sizzix plates are interchangeable with Spellbinders plates, though it is not recommended. There are also "generic" cutting plates (clear ones) that are offered on Amazon. The manufacturers' plates are not very expensive, I would think SU sells replacements
Clarissa thank you so much for visiting this video!! I use this Cut & Emboss machine nearly every time I design a card. If you want embossing using Embossing Folders or cutting with Framelits/dies this machine is a must in my opinion. There are tons of framelits now that match the stamp sets to avoid fussy cutting out the image. Here is the link for the machine at my online store: www.stampinup.com/products/stampin-cut-emboss-machine?demoid=16275 Hope this helps!!
Kim thank you so much for stopping by to watch!! Being a demonstrator over these more than 20 years I understand other demonstrator's put the closed side first. I have never had an issue. Hope this helps!!
Thank you for viewing!! Here is the link to my online store for the Cut & Emboss machine: www.stampinup.com/products/stampin-cut-emboss-machine?demoid=16275 U S ordering/shipping only.
Well I'm sure disappointed in my new machine, I watched your video and thought wow looks like a great machine so ordered it, last night when I was cutting some dies the instruction sheet that is on the plate rolled up and came off all crumpled, very disappointed in how hard it is to open up too. $120 down the drain in my opinion. Marge D
Janesse thank you so much for watching. I am sorry my website is confusing to you. I would be happy to help you. Please email me Lisa@lisasstampstudio.com so I can answer your questions.
Thank you for taking the time to show how to correctly use the SU Cut & Emboss Machine! Really helps with the purchase decision.
You are so welcome Ellen! Glad it was helpful!!
I might be wrong, but I believe that you are always supposed to put the embossing folder in with the closed/seam end first to prevent the seam from cracking.
Cass thanks for watching!! I have been told both ways for the embossing folders. I have always put the open end first.
Cass J I agree with you as I feel putting the opened ends of the embossing folder could slightly shift one layer and cause damage or poor embossing over time.
I’ve got a FREE DOWNLOAD that provides product highlights, tips, pricing and a great Q&A section! It’ll be a great reference for you. Click here: lisasstampstudio.com/2020/08/cut-and-emboss-machine-guide-everything-you-need-know.html UPDATE: The NEW Magnetic Platform WILL BE available on September 1.
How much will the new machine cost or is price in the catalog
The new embossing machine is in the Annual catalog. You can also click this link for more information:
I’ve got a FREE DOWNLOAD that provides product highlights, tips, pricing and a great Q&A section! It’ll be a great reference for you. Click here: lisasstampstudio.com/2020/08/cut-and-emboss-machine-guide-everything-you-need-know.html UPDATE: The NEW Magnetic Platform WILL BE available on September 1.
I love both , but the trees with the snow brings it to life
Lillian thanks so much for watching!!
Is same than big shot but in small size. I preferred the big shot because are dies or embossing folder are big perfect for big shot. More versatile.
I use the large size Smart Cut and Emboss Machine! This is an awesome machine!! The mini is useful for the smaller dies! Thank you for watching!!
❤️ my stamp emboss cut machine easy to use easy to store Does a wonderful job and I’m so happy I ordered it --Thanks Lisa for taking time to show it off and explaining it all!
Wonderful! This is an awesome machine! You are so welcome Kim!! Thanks for visiting!!
I just purchased the new embossing machine , I can hardly wait until it comes. Your video is very well done, it is very helpful, with clear instructions and tips. Thank you for the help-
You are most welcome Kathy!! I am so glad this video was helpful for you!! You will love this embossing machine!!
Love this machine!
Denise I totally agree!! Thank you for visiting!!
Thank you very much Lisa. Best tutorial I have ever seen!!!! I need this machine lol
Glad it was helpful Pam!! This is an awesome machine!! I highly recommend it!!! Thanks for viewing!!
Love the new machine Lisa...
This is an awesome embossing machine Denise!! Thanks for watching!!
I’ve got a FREE DOWNLOAD that provides product highlights, tips, pricing and a great Q&A section! It’ll be a great reference for you. Click here: lisasstampstudio.com/2020/08/cut-and-emboss-machine-guide-everything-you-need-know.html
Thanks! Do you have a video on the mini machine?
Sandy thank you for watching!! The mini machine is the exact same as this larger model! Hope this helps!!
Lisa,
Your videos are all excellent! I find you pleasant to listen too and your directions are clear and concise!
Thanks for this video in particular. 😊
Thank you so much for your kind words and for visiting this video!! In case you did not know I am now live on the 1st, 3rd, and 4th Monday, and the 2nd Wednesday of each month at 8pm ET.
Very Nice information you gave. Thanks Mam.
Happy this video was helpful Smita!! Thank you for watching!!
Thanks Lisa, I have the mini machine . This video was very helpful. Do plan on getting the bigger one but since the magenetic plate is not available I’m going to wait for those issues to be resolved and get it all at once. Hope it’s soon! Take care, stay safe.
You are so welcome! Carolyn happy this video helped you! Enjoy your Mini Cut and Emboss machine!!
Best demo I have seen yet! Love your videos.
Wow, thanks! Jennifer thanks so much for you kindness!!
Lisa, I thought that when using embossing folders you are supposed to put the folded end in first. I noticed that you put the open end first. Which is correct?
Kathy that is a personal preference. I have always put mine through open end first. I think there is less stress on the fold. Hope that makes sense!! Thanks for watching!!
Really informative video--Thanks, Lisa!
Glad you enjoyed it! Thank you Sue!!!
I love your paper storage. Where did you get it? Do you love it?
Sheryl thank you so much for visiting!! I love my storage units!! Here is a link for my craft room favorites:
lisasstampstudio.com/craft-room-favorites
Just click the picture for more information!
This is just like the spellbinders one that has been around for a while.
Thanks so much for stopping by to watch Becky!!
Great introduction Lisa to ref new machines got my order today yea thanks again
Thanks Brenda and for stopping by to watch!
Thanks for the great demonstration. It’s on my wishlist.
You are most welcome Loretta!! You will love this embossing machine!!
Hi Lisa! Thank you. I have joint pain in my hands like you do. I was concerned about whether you need to use a lot of force to turn this crank?
Kim thanks so much for visiting!! No, not much force needed at all!! Here is a link to my online store to take a closer look:
www.stampinup.com/products/mini-stampin-cut-emboss-machine?demoid=16275
@@lisasstampstudio thank you!
Thanks so much for the clear tutorial, Lisa!
Glad it was helpful! Happy to have you watch today!!
Hi Lisa, when will the mini cut and emboss machine be available? Thanks!
Susan happy to have you watch today!! The mini Cut and Emboss Machine will be available January 5th!!!
Thanks for the demos Lisa. 😊
Brendaelaine thank you for visiting!! Glad it was helpful!
Awesome! What are those paper dividers in your shelf?
Thanks so much for watching Terry!! I think you are referring to the wooden storage units from Stamp N Storage that I have in an Ikea shelf. Here is a link in my craft room favorites that may help.
🤩 Craft Room Favorites: bit.ly/3tHFG8g
They are by far the best paper storage I have found!!
I ordered the papus embossing machine. What do you think about this type of machine. I am a beginnner.
Suzanne thanks so much for watching!! I only have used the Stampin' Up! embossing machines. I personally feel hands down this new Stampin' Up Cut & Emboss machine awesome! Sorry I have no input on the papus machine.
Enjoy your videos. Do you have any problems die cutting the ornate layers on this new machine? Is there a special way of laying the die on the card stock?
Barbee thanks for watching!! I have not had problems with those dies. No special way of laying on the cardstock. I do run that through and then back through.
Lisa Curcio Lisa's Stamp Studio Then there must be something wrong with my die machine. When I lay it on straight, it is almost impossible to turn the handle. When I Place it at an angle, it will go thru but it is still kind of hard. May have to return it.
I needed this video, mine as been sitting her bc foa couple of weeks
So happy this was helpful Marsha!! Thanks for stopping in!!
Lisa, I love your videos! The question I have is what is the measurement of the larger cut and emboss machine in a closed position? I have a customer who has a limited storage area and got rid of the old one because it took too much space. Thanks in advance!
It measures approximately 10 x 6 1/2 without the handle that would add it to about 14 x 6 1/2. very compact!! Hope this helps!
I am on the fence about buying the new SU cut and emboss machine as I have Big Shot that serves me well. What is the difference that makes this one so much better and also can I use my magnetic plate from my Big Shot on the new machine? Your video was very good!
Fran happy to have you visit this video!! I can tell you this is an awesome machine. It is much lighter than the Big Shot, runs smoother and is more compact. You can use you plates from your machine, although it is not advised to do so. I hope this has helped you!! Thank you!!
Thank you for your response. Can you use the cutting plates from the Big Shot?
I think all machines have a patent design which prevents other companies from blatantly duplicating your product without your consent. Question for you. I’m (not sure) guessing that this is the Platinum die-cutting machine licensed/designed especially for Stampin Up the same as the Big Shot was licensed/ designed for Stampin Up. That being said, will the Platinum parts (plated, base, magnetic plate, etc.) work with this machine? Great demonstration! I always look forward to your videos.
I thought Big Shot already has a machine out like this, too. I'm pretty sure they do.
They do. I believe it’s called the fold-away. Doesn’t take up so much room on your desk.
I have the Spellbinders Platinum 6 (6" platform) and it folds up to a compact size. This SU machine looks very much like the Platinum, though I like how the Platinum carry handle folds into the machine.
I was hoping that they were the same machine (Spellbinders Platinum and the Cut n Emboss) because that would mean that the cutting plates are the same. I was concerned because in the video she said that Stampin Up does not recommend that you use products from another company in this machine. So if the cutting plates are not the same, that means I’m always forced to order them. Not that I mind ordering products but sometimes you just want to be fiscally sound with your money and cut out the middle man, shipping costs, wait times, etc. and just hop in your car and pick up consumables like this from Michael’s or JoAnns. So that those $11 plates don’t end up costing $15.
Thanks for watching Cass!! Yes, you can use the plates from your previous machine.
I hope you can help me. I have the small cut and emboss machine from StampinUp it from day one, it’s a big struggle for me to cut some dies! It’s a struggle for me to align everything and can take me up to half an hour before I get one cut! Some days it works beautifully and others it just won’t work for me! Any tips, suggestions? I’m frustrated to now end!
Jeannette thank you for visiting!! Please email me with your concern: lisa@lisasstampstudio.com
Thanks for the demo on this with such great detailed info Lisa! I was hesitant to order since I already have a Cricut Cuttlebug, but the features of this SU! Cut & Emboss are SO much nicer! I think I just may have to take the plunge! 😆
Thanks, Patty--good info!
Glad it was helpful! Patty you will love this embossing machine!! Thanks for watching!!
I’ve got a FREE DOWNLOAD that provides product highlights, tips, pricing and a great Q&A section! It’ll be a great reference for you. Click here: lisasstampstudio.com/2020/08/cut-and-emboss-machine-guide-everything-you-need-know.html
Sue thanks so much for stopping by to watch!!
Hi Lisa! Just a quick question, I had a lot of embossing folders for different name brands; would I be able to use those on this new machine? Thank you for your time on this and be safe.
Melissa thanks so much for watching!! Yes, I do believe those embossing folders will work, you may have to adjust the thickness level.
Hi just received a new machine and was wondering can cut and embossed folders be used and I also have a thick sizzix die and can I use that with my new machine
Annie thank you for watching!! Yes you can use embossing folders. I am not familiar with the thick sizzix dies so I cannot say.
I was meant to ask can you use the cut and embossed folders with this machine
Hi Lisa! Thanks for this tutorial video. I can’t find the video to use that tissue paper you talked about. Can you share the link please?
Christin happy to have you watch!! Here is a link for the video I think you are looking for:
th-cam.com/video/63pJlqVS5zo/w-d-xo.html
Loved this ... I will be ordering it.
I have a question though ... you put your folder in "upside down" ... ie: open end in first and you mentioned that, but not the WHY.
I've always been taught to put it in closed end first ... is this the new rule then with these machines? does it matter?
Jeannette you will love this embossing machine!! I have been told both ways for your embossing folders to feed through. I have always put mine through open end first. Thanks for stopping by!!
Stamp cutting and embossing same
Thank you so much for viewing!!
Lisa.....I thought we have been told to put the seam/hinge through first so that it limits stretching of the folder
Paula thanks so much for visiting!! I have been told both ways for the embossing folder. I have always put the open end first!
Hi Lisa, how do I get the Pic tool ? I live in Ontario, Canada
Irene happy to have you watch!! Thank you for your interest in the Stampin’ Up! products. Unfortunately I’m unable to sell you products since I’m in the United States and the catalog will reflect U.S. pricing and products. In addition, my contract with the company prohibits me from selling outside the U.S. due to tax and tariff laws
To see if Stampin’ Up! sells in your country, head over to the demonstrator locator at www.stampinup.com.
Does the new magnetic plate fit the old big shot?
Peggy thanks so much for stopping by to watch!! The old magnetic plate is a thicker plate. The new magnetic plate is thinner. I do not think the "sandwich" would be the same thickness. Hope that makes sense.
That is what I was taught ..to put seam of embossing folder in the machine first. Why do you do it differently?
Thank you for stopping by to watch! I have been told both ways for the embossing folder. I have always put the open end in first.
Lisa Curcio Lisa's Stamp Studio well, I would say every other demonstrator I have watched has said to put the folder in with the fold first.
Is it normal for the die cut to leave an impression on the bottom plate 3 or did I do something incorrectly?
Jeni thank you for visiting!! No, that is common and your plate will soon look well loved!!
I was taught to put embossing folders folded end first as embossing machines tend to stretch folders over time.
Trisha so happy to have you visit!! I have been told both ways on the folders! I have always put the open end first!
Lisa, I am confused. I was told that the hinged edge of embossing folders should pass through a machine first so as to not create pressure on the hinge as the folder is being crunched through.
In this video, you said to load the open ends first.
Which is best?
Maybe it depends on how long you want your embossing folders to last...?
Jane I have been told both ways. I have always put the open end in first. Thanks so much for stopping by to watch!!
Thank you for viewing this video!!
Can you use the thick steel rule dies ?
Debby I think you may be referring those older thick dies. Yes, you can use those. Hope this helps!
Lisa Curcio Lisa's Stamp Studio can I use the mini dies in the catalog in the new die cutter, the LARGER ONE ?
What are the dimensions of the machine closed width, height and depth? Thank you
Karen happy to have you stop by! Estimated width 9 1/2", Height 7 1/2 w/handle, Depth 6 1/2". Here is the link at my store to read more: www.stampinup.com/products/stampin-cut-emboss-machine?demoid=16275
Hope this helps!
Hi Lisa, how much would it cost to ship it to India?
Deepa glad to have you visit this video!!! Thank you for your interest in the Stampin’ Up! products. Unfortunately I’m unable to send you products since I’m in the United States and the catalog will reflect U.S. pricing and products. In addition, my contract with the company prohibits me from selling outside the U.S. due to tax and tariff laws
To see if Stampin’ Up! sells in your country, head over to the demonstrator locator at www.stampinup.com.
@@lisasstampstudio Not a problem. Sure, will check for that . Thank you for your reply. 😊
Can you use original red Sizzix die
Thank you for watching Susan!! I am not sure what the red Sizzix die is you refer to. Please email me with this concern orders@lisasstampstudio.com
How do I get one
Linda thanks so much for stopping by to watch!! Here is a link to my online store for this great machine!!
www.stampinup.com/products/stampin-cut-emboss-machine?demoid=16275
How do you stop your thin bords from curving into a c like shape??
Flip them over to the opposite side when they bow to re-flatten them as they run through the machine.
Brodie thanks for stopping by to watch!! I flip my plates back and forth, and side to side to help prevent the bowing. I have had better results with this machine!!
Thanks for watching!!
Thank you I’ll have to remember that and see if it will work with my machine with it not being a popular or well known brand
Can I use my sizzix clear plates in it?
I have read that Sizzix plates are interchangeable with Spellbinders plates, though it is not recommended. There are also "generic" cutting plates (clear ones) that are offered on Amazon. The manufacturers' plates are not very expensive, I would think SU sells replacements
Edith, yes your clear plates will work. Stampin' Up! does sell replacement plates as well! Thanks for watching!!
Thanks for watching!!
i cant use the handle but looks a good machine
Dorothy thanks so much for watching!!
Do you really need a machine. I'm just curious if it's worth getting one would I use it alot
Clarissa thank you so much for visiting this video!! I use this Cut & Emboss machine nearly every time I design a card. If you want embossing using Embossing Folders or cutting with Framelits/dies this machine is a must in my opinion. There are tons of framelits now that match the stamp sets to avoid fussy cutting out the image. Here is the link for the machine at my online store: www.stampinup.com/products/stampin-cut-emboss-machine?demoid=16275
Hope this helps!!
@@lisasstampstudio I don't make a ton of cards I due use my Cricut a lot. However I know it would be amazing to have when I do cards
most people put the dies in face UP and paper on top to cut. How come you are placing it the other way around ?
Thanks so much for watching! Always put your dies face down on your cardstock then cut. When using the magnetic plate the die needs to be face down.
put in the open side first? I was teached to put the closed side first....
Kim thank you so much for stopping by to watch!! Being a demonstrator over these more than 20 years I understand other demonstrator's put the closed side first. I have never had an issue. Hope this helps!!
Plz dai cuter mashing sri lanka onling shiping plz dr
Thank you for viewing!! Here is the link to my online store for the Cut & Emboss machine:
www.stampinup.com/products/stampin-cut-emboss-machine?demoid=16275
U S ordering/shipping only.
Well I'm sure disappointed in my new machine, I watched your video and thought wow looks like a great machine so ordered it, last night when I was cutting some dies the instruction sheet that is on the plate rolled up and came off all crumpled, very disappointed in how hard it is to open up too. $120 down the drain in my opinion. Marge D
Oh no Marge!! Please call Stampin' UP! and explain so they can help you! Email me with concerns. lisa@lisasstampstudio.com
It looks great. But your web site is way to confusing. So I wil have to pass. Thanks
Janesse thank you so much for watching. I am sorry my website is confusing to you. I would be happy to help you. Please email me Lisa@lisasstampstudio.com so I can answer your questions.