I learned from this video that you need a router to establish a communication between two PC which belongs to the different VLAN. And we need two create interface on that router. When traffic sent from PC to switch then it further go to router even if the another VLAN is in same switch. So the router can then to the switch and then to the PC. Thanks for making this video.
Dear @pm networking, for the intervlans, does it neccessary create ACL in the router or create a routing table? Other way, where it is the security if all the vlans can communicate each other?
If i configure vlan 10 as native vlan in all switches, then the switch will forward the frame from vlan 10 untaged. At this point when the router receives an untagged frame how will the router know it is from the native vlan?
Hi sir, i did this exact scenario and used Multi layer switch 3560 instead. then I can not trunk it to connect to router or other switch. why is that ?
Sir router below that two switches then both switches are connected to a single switch and from that switch 6 pc s are connected, how can I configure this scenario
What if i have only vlan 10 on switch and vlan 20 on other switch , i want to know the link between switches will be access or trunk ?? And also the link between switch and router will be access or trunk and why ??
The link between two switches will be trunk and and same for router because we need a port to pass a vlan out of the switch so this is done by a trunk port. A trunk port is designed to pass the multiple vlans.
You also can have portaccess link between the switches, but you will need one cable to each vlan and 2 cable to connect to 2 interfaces on the router one fir each vlans.
Please discuss Native Vlan and why need to change it how to Change it and the difference between Sub interface and SVI and its use, layer 3 and 2 port channel, conditions of use With Labs
Hello, I'm Adrian, I don't know that you can't ping two hosts in a vlan on a 48-port 3com switch so that it receives the ping, can you explain it to me please, regards.
I learned from this video that you need a router to establish a communication between two PC which belongs to the different VLAN. And we need two create interface on that router. When traffic sent from PC to switch then it further go to router even if the another VLAN is in same switch. So the router can then to the switch and then to the PC.
Thanks for making this video.
The router could be part of pc
happy to got my missed lecture. love from Pak
Most welcome!
ive tried this step with different subnets like /24 and /16 with dhcp pool but not working. any advise?
Thanks, you helped me a lot.
Glad I could help!
hi, is it normal for a vlan can't ping the router, while the router can ping the vlan... and vlan 10 and 20 can't ping each other also
is it necessary to make the sub interface in 0.1 like means may we give number others 0.1?
Dear @pm networking, for the intervlans, does it neccessary create ACL in the router or create a routing table? Other way, where it is the security if all the vlans can communicate each other?
Yes we have another way also
sir , here we dont have to configure routing protocol like OSPF right ? on what situations do we need to config routing Protocol ?
As always top notch teaching!
Thanks for appreciation 🙂
how to configure router that connected with one switch and that switch again connected with 2 switches which has vlan 10 and 20
Sir can we connect other router rip ospf with it?
Yes
@@PMNetworking Sir can pls make vedio on it humble request from me
If i configure vlan 10 as native vlan in all switches, then the switch will forward the frame from vlan 10 untaged. At this point when the router receives an untagged frame how will the router know it is from the native vlan?
All untagged traffic will be considered as native vlan traffic
Hi sir, i did this exact scenario and used Multi layer switch 3560 instead. then I can not trunk it to connect to router or other switch. why is that ?
which version of cisco packet tracer you had used????
Sir router below that two switches then both switches are connected to a single switch and from that switch 6 pc s are connected, how can I configure this scenario
What if i have only vlan 10 on switch and vlan 20 on other switch , i want to know the link between switches will be access or trunk ?? And also the link between switch and router will be access or trunk and why ??
The link between two switches will be trunk and and same for router because we need a port to pass a vlan out of the switch so this is done by a trunk port. A trunk port is designed to pass the multiple vlans.
You also can have portaccess link between the switches, but you will need one cable to each vlan and 2 cable to connect to 2 interfaces on the router one fir each vlans.
if we need to communicate between 2 diff vlan without router can we ?
Yes, You can do by creating svi on multilayer switch
Thank you sir
You're welcome, glad you found it helpful!
Yes sir very helpful
Please discuss Native Vlan and why need to change it how to Change it and the difference between Sub interface and SVI and its use, layer 3 and 2 port channel, conditions of use With Labs
Videos already available on channel
Hi how to create trunk and whats the usage pls explain
Noted
Hello, I'm Adrian, I don't know that you can't ping two hosts in a vlan on a 48-port 3com switch so that it receives the ping, can you explain it to me please, regards.
th-cam.com/video/AZzzQeEp4UA/w-d-xo.html
sir can u plz teach me
2 router 2 switch 4 pc VLAN provide me that video
Noted ✅️
can you please add the .pkt file in discription tomorrow im having exam and need that urgently please
Check description
Very easier method how you have taught us.plese upload effective video on SD wan Cisco viptela
Noted
You are very helpful thank you, but just a little constructive criticism, you tend to shout alot, maybe just tone down your voice volume a little.
Thanks for feedback
Please show the truck option
Good work man thanks
Welcome
Spanning tree protocol ke bare main bto
STP is a Layer-2 protocol which is used for Layer-2 loop prevention.
To know in details watch my STP video.
Thanks
Welcome
Why using routable is addresses instead of private? This is bad
To reduce the shortage of ipv4 addresses
@@PMNetworking that would be private. So why using routable
nice content btw
Thank you for your feedback
Thanks bro..
Welcome
Sir not working
Sir please kindly
Sure
How contact to you
my WhatsApp number is +918511826341
Please Hindi language
you didnt configure TRUNK in this video..
And your number is incorrect
please don't shout
Noted
@@PMNetworking Thanks for explaining it so easily
Stop shouting
Noted ✅️, this was my bad habit earlier 😅, check the latest videos
can you stop shouting?
Thank you
You're welcome