Best Hydraulic Press Moments of 2022
ฝัง
- เผยแพร่เมื่อ 30 ธ.ค. 2022
- Compilation of best Hydraulic press channel videos of 2022. There all of the most interesting material and other press tests done with our 150 ton and 40 ton hydraulic press and force sensors. Most satisfying and interesting compilation of the year!
Our second channel / @beyondthepress
Our fan shop www.printmotor.com/hydraulicp...
/ officialhpc / hydraulicpresschannel
Do not try this at home!! or at any where else!!
Music Thor's Hammer-Ethan Meixell - วิทยาศาสตร์และเทคโนโลยี
New try! I got demonetized and age restricted with the first upload, TH-cam thought that "oho" was bad word during the first 15 seconds? So let's try without that! Happy new year again to everyone!
Very Rasscist of TH-cam. Not good.
No onhan oho nyt aika törkeä sana
Guten Rutsch ins neue Jahr
@@AbsoluuttinenTotuus racist?
@@SomeRandomPiggo raascist against Finns
An infrared camera would be very interesting to see just how quickly things get hot under pressure.
you're right
underrated comment
this
It's illegal to destroy money. I have turned it into the police.
@@tankl.jackson3481 yea sure the police are gonna care. Ever been to disneyland? You put a coin in and it stamps it with a design? The police dont give a shit.
“that was really stupid” is a hefty understatement for most of the things on this channel. never change or stop, you wonderful finns.
I'm a machinist that makes the tools for powdered metal compaction presses. They operate anywhere between 100-1000 tons of force. Videos like this demonstrate why my tolerances are +/- .0001 inch for dimensions. (.00254mm) In effect, it's either perfect, or scrap, because if we mess up, things like in this video happen.
hecking americans man.... just use 0.0025mm or 0.001mm or so, doing any type of machining or engineering work in imperial (or metric that has to be converted to inches) is just mental.
Way too many issues like differing international standards, eventual errors in the conversion or just confusion (looking at you 25 million dollar lost sattelite or what it was that went down because of mixed use of imperial and metric)
@@ToBeIsWasWere The satellite went down because of _mixed_ use. Not one particular system being "mental". It's also easy for the same mistake to happen within a system as well (Reporting mm instead of cm).
@@ToBeIsWasWere Just seen your reply. I only referenced metric for those that don't easily think in inches. I can easily work in either, and know well that mixing the two doesn't work well. Many customers will try to do so, because a lot of college trained engineers are stupid, but we send those blueprints back to be corrected, or we don't take the job.
Also, while I'm am an American, you can take that attitude and stuff it in your sauerkraut. Been around the world while in the military and for my profession. I can tell you for free that stupid is everywhere and knows no country borders.
@@ryimscaith1593 Also as a machinist, I easily work in both, but never at the same time. Mixing them is asking for disaster, especially with for instance the NC machine I ran frequently, to go between you had to toggle it manually in the controller, and then load another program programmed for that section, then toggle back, too much room for an error, loading the wrong program, forgetting to load the other, or forgetting to change it to metric control at the stop, all of these reasons were why we would not do it. Also I did a LOT of manual machining, why not do it in metric? because the machine was made in imperial, and with no DRO, going on indicators and the scales on the machine, if it's made in imperial, I work imperial only on those machines.
Tobias does have a point in conversion errors, however the shops I worked in never accepted a print that didn't match what the machine was set up to do, and say if they wanted a part off a manual machine and the print was metric, we sent the customer the print back, THEY can convert it, then as long as we make it to the print, it's not my problem if they converted it incorrectly. Machinist 101, make it like the drawing, so when they complain, you made exactly what they asked for, if it wasn't what they wanted that is a them problem, and they are still going to be paying the agreed price.
@@npip99 mm instead of cm I've never seen happening, one is 10 times bigger than the other
In a million years I would have never thought that layers of paper under extreme pressure would explode/shatter like that. Astounding.
It's actually pretty obvious that's what would happen when you understand the forces at play
It's the same principle behind a volcanic eruption: lots of pressure builds up in one place, eventually it's enough to overpower the forces kipping it at bay (the surface rock for the volcano, the tensile strength for the book) witch results results in all that pressure begins released BOOM
I was shocked at first too, then I remembered there was such a thing as dust explosions, where enough combustible particles collect in a tight area can explode. And that's without any kind of external pressure like using a hydraulic press.
@@Alustar22 that’s very different, it’s an incredibly rapid burn.
That's called tension, Paper surprisingly has a high tension resistance, If you simply pull a piece of paper on opposite ends it will not tear, or will give a very hard snap if pulled hard enough, Because the press is pushing down on the paper, it wants to slide out from under the press but is evening out the energy in all directions at once and eventually, well, you can see what happens
Imagine the same situation occurring on a block of wood,since that’s effectively what a compressed book is. That paper didn’t shatter, it splintered.
Some people wonder why tyrants always say books are so dangerous. Maybe this is why.
With enough force and potential energy, anything is possible!
imagine getting shot by a fucking book lol
@@wes4578 "Finnish him!"
@@briansimcoe9119 finish* 🤓
@@Biggestbarcafan Finnish. 🇫🇮
There's something unusually satisfying and fascinating about seeing a stack of coins smushed into a a giant mega coin. Also makes the stories of how my uncle would trick arcade machines back in the day by using pennies he flattened out with a hammer make more sense.
Could you try using an infrared camera to see how hot the pressure points get on an object? I think that’d be neat to see.
This is a great idea
YES !!! And tilt the IR camera 90° to see the mini mushroom clouds
It's particularly impressive how, even on the high speed camera, the broken pieces fly so fast. There's so much force being imparted on them.
All the tens of thousands of kg on stuff under one kg
This high speed camera isnt fast enough.
More interestingly, how this force is converted to elastic energy, and how the elastic energy is instantly converted to kinetic energy and to heat upon rupture.
a paper can cut you very well if you didn't know...
The Slo Mo Guys did it...
th-cam.com/video/1A9epPJraho/w-d-xo.htmlsi=-Q34PVzRyUrC9-l6
Therapist: Would you say your job involves high pressure and stressful work?
HPC: Yes
Very dynamic environment
Jes* (finnish accent)
8 years later and this is still my favorite ASMR channel.
I am simply amazed by how deeply satisfying this is!
Beautiful! I never tire of seeing bearings exploding. It is a work of art in slow motion! all those parts dancing in space with sparks and lights... I just love it!
The chisel and the coins has to be the most satisfying thing to watch. I love how they stay stacked and just go shooting off to the side.
@John Alpha I used to do that too, but never managed to find them afterwards. They always seemed to get sent flying off, that or I was just not looking hard enough. Had the attention span of a gnat back then.
those drill was real le miserable quality - but nice in koala :-D
@@jimboSleeeeiiice I thought so too but it's not molten metal. There's a hole in the top of the hammer and you can see. Plus the tiny pieces left on the base would have cooled and not still been red. It's whatever was helping the handle stay connected to the head of the hammer.
The different failure modes! Stressed fiber (paper), Ductile (most metals), compressive failure of ceramic/rock.
@John Alpha Not stacked, but placed here and there. Rough wheels tend to pick them up for a few revolutions (3 to 20 feet)
Really one of my favourites of all time is 12:20 when Lauri sounds genuinely surprised and happy that the safety glasses worked as intended.
"This is like, educational!" too cute.
It really is educational. Imagine paying about 1 dollar to keep your vision.
It's kind of amazing that the safety glasses were only _scratched_ after taking a chunk of a drill bit moving at an appreciable fraction of the speed of sound
The rocks experiment, how they go all crumbly (friable is the correct term) is the same as what happens to the rocks at an impact site of a meteor - the impact force is so high it literally powders the rocks, then compacts them again so they look like rocks, but they can be crumbled in your hands - I've seen it at the Arizona Crater. All the "rocks" within and near the impact crater are like this.
i love that there is an endless amount of things to press... and on top that multiplied by the methods.. .this is ENDLESS content
It's so interesting to see how much energy can be stored in objects under pressure. At the point when the object explodes, nearly all of the energy that is released is coming from the tension from within the object. Really cool physics.
You should see what happens with radioactive materials 😲
You know, putting a column of post it notes under extreme pressure like that is an excellent demonstration of what happens in deep mines, where the colossal pressure of overburden can trigger a burst from the mine shaft wall or pillar.
You should use something other than post it notes in your mine.
Lol
@@HubertofLiege smh imagine using post it notes to support a cave. Cardboard seems like such a better alternative
This is so satisfying watching this. Thanks for posting ✌️
Great video. I love the work you are doing. I am so glad you got this reuploaded.
I love the fact that when you boil it down to basic terms, If you squeeze something hard enough, it'll explode.
Yes
That's how stars work.
@@kibe2134 pretty much exactly this.
@@kibe2134 Extreme density is something I really struggle to understand and your comment has clarified a number of questions bouncing around my head. Thanks!
Under those conditions, the answer is yes and no. Elastic properties of the material play a big part.
After watching this channel for a couple years or so, I can honestly say I have no idea what a hydraulic press would be used for other than this.
UPDATE: While I appreciate all the replies explaining what a hydraulic press is used for, I perhaps should point out that my comment was a joke. I know what it's used for. My comment was a joke referring to the seemingly infinite uses for a press that aren't actually the intended use. I realise sarcasm is not conveyed easily through text, hope this clears it up.
Smashburgers
Haaaa
Mostly garbage compaction
A machine like this would be used in a manufacturing process where parts are quite literally press fit together when the matching pieces are machined in tight tolerance of each other within .001 of a inch or tighter. Think like bearing housings and stuff like that.
To kill the terminator
Woww those bearings at the end were amazing beautiful! 🤩 That's the best thing I've seen on YT for a while.
At 4:40 it sounds like you gained Minecraft experience points.
"I have the best worst idea" is such an accurate statement for so many situations
Pretty much everything will explode if compressed hard enough is what I learned. What a rad video. Wild watching paper explode!
Absolutely amazing how much energy is released when compressing paper. You guys are crazy.
E=MC²
@@AL-SH Wrong equation. You’re looking for F=ma. Force equals Mass times Acceleration.
The force the press exerts onto the target is equal to its mass (heavy) times its acceleration (considerable). The targets deform until they can’t and then start absorbing that energy until they *suddenly* can’t.
nuclear reaction paper 🤯
Paper was crazy, how bout that knife though!!😮
The amount released is the same as the amount you put in. In this case, 70 tons of force.
All the years I've watched your vids and I've never thought of how much of a beating that sudden break in pressure must be on the press.
It would be really interesting if you could set-up a cheap (since you'll probably only get one or two uses out of them before they're blown-up) $10-15 infrared kitchen thermometer in the shot and aim it at whatever you're squishing. I'd love to see the reading shoot from room temperature to 500-600 degrees simply from adding mechanical force to various materials, metals especially. Does paper get hot from compression? It would be neat to see, anyway.
Everything gets hot when compressed, you're adding energy to the system. However, I agree 100% I want to see how much, and how much it differs per material, because it will vary drastically. So Very interested in that lol
the satisfaction of watching things get destroyed is unmatched
The cheeky smile from the paper roll before it explodes is perfect
1:27
You’re finally awake
Can’t help but to laugh so hard! It’s simple videos like these that brings me joy
This song has hit me harder than anything from mainstream music EVER has. Thank you
The force bolts and nuts can withstand gives me great confidence now. WOW.
If they're hardened steel, like automotive grade, yeah. Zinc hardware is super soft.
Even regular hardware store screws are good enough to build houses with.
2:25, I unconsciously blew on my phone screen thinking I'd blow the glass powder off 🤦🏻♂️
Superb video.
Idk why I love the paper explosions.
Stay classy guys !
The best part was how much joy and laughter this caused. LOL.
Every time I watch this guy, I remember why this is the best hydraulic press channel. It really all comes down to the accent, it makes these videos way funnier and he knows it.
Not guud 🤭 I like when he says this.
sounds like marco repairs coffee time for talk english
Where is he from?
@@hectorolea9665 pretty sure he's Finnish
Aaah! Thats who he sounded like. ISMO, the comedian. He sounded like someone i had heard before
3:16
"Hey! I have the best worst idea!"
-- famous last words
It amazes me how satisfying it is to watch things explode fro,being squeezed is.
Amazing how quickly the phase change takes place.
3:24, “ ok that was really stupid”lol
The safety glasses melon videos were among my favorites this year.
Put ur videos in slow when u see this video lol its worth it u see it even slower and all detail great video thank u
"Now that was really stupid!" Lol! Best commentary ever by a TH-cam creator!
These are so fun to watch. And helped with being more safe in the workshop using a much smaller press by knowing how it can go very bad!
This is so unaccountably satisfying. Most channels get boring after a while, but this? Nope. Still wonderful.
These videos are SO cool, seriously!
Can´t belive it´s so fun to watch thanks, like some releaf in this crazy world.
It would be interesting if you used a laser thermometer to find out how much that chilly mallet heated up as it compressed.
9:20 so that's how they got the original death star shot
I need one of those!
Awesome stuff, thanks for the entertainment.
This one was hilarious😅😅👍👍
Especially with the post-it papers☝️
Thank you
11:47 That is one resilient melon.
I don't know why, but I found the failure of the large bolt threads to be highly entertaining. I retired from an industry where we were more concerned with bolt elongation. The drill bit was informative. Thankfully, the melon lived.
That gentleman's laugh is just diabolic :) Another amazing video 👍Paper rulezzz!
The most amazing part to me is how successful a channel is just for smashing stuff with a press. One more thing I wish I’d thought of.
The coins getting snipped down the center are always my favorite. The sound, and the visual is just exciting to the senses.
Thank yous for being so fun with the hydrolic press. I've really enjoyed watching.
So what causes the sparks on the high-speed just before and during the metal shatters? Is that just the energy being released super-heating the metal??? That was really neat and interesting! ❤
WHOA! That went off like a Explosion!
The slow-mo of the stack of coins being cut in half sounded like something out of a fantasy movie. And the prefragmented ball bearing, well, all I can say is "Great shot, kid. That was one in a million."
Lol...I like the Watermelon with the safety glasses. And the 1/2 book sliding off the cutting board. Good job!
I love watching this stuff
Came across this video in my feed so I'm a new viewer to your channel. This video reminds me of when I was in high school my theatre tech buddies and I would do similar things with the trash compactor on campus. I enjoyed this so much, what a great video!
2:50 Never knew He did this but he made a machine of childhood dreams, a knife that cuts just by going straight down, so satisfying
I love the fact that this guy has the time and money to squash things and share them with the whole world :)
The first clip was just beautiful when it's in slow motion.
This is so awesome. I've worked with hydraulic presses, but not at these pressures. Total destruction. I love it.
LOVE THE DESTRUCTION!!! Eager for more in 2023
Neat! Commentary even better!
Why is this so satisfying?
0:32is actually a slow motion animation of my head exploding from stress
I loved the toilet paper roll fireworks at 4:50 .
Incredible, fascinating and educational video!!! Great work guys!!!!
The sparks on that ball bearing were insane!
1:12 camera man died XD :D :'D
Me snapping my fingers: 10:24
I love how he said, "Eh it's okay, it'll sort itself out." 😂
The only thing i fear is not the unexpected *boom* with some objects when they explode, but the amount of cleaning they have to do..
It's amazing to see the different ways thing react to extreme pressure. Love the slow motion shots. 👍👍👍👍👍
How come you and SlowMo guys never did a colab, this is gold
Great video footage. Best of luck 🍀👍🏻🇺🇸
That prefragmented ball bearing was fun! 😉 👍🏻
8:59 hydraulic press vs thermal detonator
That’s what I thought too haha
Never ceasing to amuse and entertain. Glad you're still doing this.
It would be interesting to see what different types of cloth do under extreme pressure.
I love it went you say "hey i have a good idea" 😂
7:45 copies what actually happens many miles under the surface of earth everyday. There's also immense heat involved which produces patterns in rocks.
1:20 lmao
Hi i love your vidios a lot ...can i ask wher did you get the ballbering spiner at end of the vidio or wher can i get one .....pls thank you .........
The moment he said at 0:44
"....... Alright.... that's not .. good"
I died of laughter 😂
That high speed camera action at the end was insane! Happy new year
This was so satisfying. The frozen hammer, the coins being cut and both of the bearings were the best! The last bearing was AMAZING on high speed.
You guys are really good under pressure.
I'd love to see this channel get combined with the Slow Mo Guys for the explosions!
Amazing as always! *Happy new year!*
Your videos are EPIC!!! I especially enjoyed the paper being compressed until it exploded… but right after that I loved the coins being cut in half.